Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Fixed my Flubb

Posts

Fixed my Flubb

#1

Fixed my Flubb

Eddie Pacheco, San Jose, Ca.

>Thanks or the moral support on my screwup.

I got a late start today, but I was able to fix, hide the error I made with a too short door for my shed door opening. I added a drip strip to the bottom, shortend the jamb by 1 inch, and added a threshold, The bottom gap now is about 3/16". I also added a ledge piece to the top opening to balance the drip strip addition. The trim is also redwood reclaimed from an overhead shade structure I rebuilt last year. The previous owner used select heart redwood for the structure so I've been real picky on where I reuse the 2 x 6's I was able to save. The grain structure is really tight on these pieces. I resawed a 2 x 6 to fabricate the simple trim.

Overall I like the way the door and trim came out. I'll take Vince's advice and NOT paint the door and will use some good quality varnish instead.

I comtemplated Kneale Brownson's advice of creating a Dutch door and even looked up a few Dutch door designs. I decided against it as I have already spent too much time on this project. I am now going to make a Dutch door to replace my side garage door as I have always wanted one.

Oh, Ken, I consider the upcoming quakes on all of my house improvements and wonder how bummed I'm going to be when my perfect tile work and other work turns to crap when the big one hits.


img

Re: Fixed my Flubb

#2

Re: Fixed my Flubb

Carol - now in NC Nebraska

>Nice save, Eddie.

Re: Fixed my Flubb

#3

Re: Fixed my Flubb

Ron Hildreth, Alta, Iowa

>Really looks good, Eddie! I've got to make two new doors on the back of my garage where I store my Harley. You've given me some motivation!

Ron in Iowa

Re: Fixed my Flubb

#4

Re: Fixed my Flubb

Charles Wiggins

>Beauteous! I'd never know if I hadn't seen the previous post.

Re: Fixed my Flubb

#5

There are no mistakes

Dan Donaldson

>Only opportunities for design improvement ;-)

Re: Fixed my Flubb

#6

Elegant Recovery..Looks Great

Kneale Brownson in sunny N. MI

>

Re: Fixed my Flubb

#7

DITTO

George@Colonel's Workshop-Havertown PA

>

Re: Fixed my Flubb

#8

Dale Lenz

Re: Fixed my Flubb

Dale Lenz

>You did well Grasshopper, : ' >. I'd be proud of it!