HEY ! When did Ol' Norm . . .
SteveM
>get a lathe ?
Knowledge You Can Build On — Est. 1998
HEY ! When did Ol' Norm . . .
SteveM
>get a lathe ?
Re: HEY ! When did Ol' Norm . . .
George@Colonel's Workshop-Havertown PA
>Good Afternoon Steve,
He got one last night on DIY channel. Actually he has done several lathe applicationnns. I'm sure Rod knows which ones.
George
Re: HEY ! When did Ol' Norm . . .
Mark Mandell - Gone Round In Jersey
>Been a while, actually.
But you don't want to watch. Saw one episode.
It wasn't pretty. |;-}}}
mm
1986 season, his first lathe was
John Nik
>...a delta lathe with a duplicator attachment...however, poor ole norm struggled with the spindle project.
the next season, he started inviting skilled turners to teach him. he also setup a good sharpening station.
later, he even started visiting turner's studios -- i especially liked his visit to the professional turner who used a huge corer to make large bowls...the wood was stationary while the machine moved.
Re: HEY ! When did Ol' Norm . . .
john lucas
>As a long time turner I've enjoyed watching Norm introduce turning into the show. Roy Underhill has done quite a few projects that include turning also.
Now if we could just get more woodturners into flat work we might have a woodworking revival of sorts.
Seems like from day one.......
R. Lance in GR, Michigan
>I think he started the NYW with a shopsmith which he used for turning and horizontal boring...there was a unisaw then as well.
Re: 1986 season, his first lathe was
Rod Peterson -- Ormond Beach
>�and the first lathe he used was a Shopsmith (as was mentioned by R. Lance). He used it three times, Episodes 102, 110, and 307�the 1989 season and the 1991 season. The first Delta was the 46-700, which made its debut in Episode 411 (1992), followed quickly by the DL40, which first appeared just two episodes later (413�also 1992).
The 46-700 has been used 23 times, right up until the middle of the 2007 season, appearing in every season save three from 1992 until the present. The DL40, however, was only used nine times and disappeared after the 13th season (2001), replaced by the 46-745. It, in turn (ha, ha), has already been used 20 times beginning at the end of the 14th season (2002) through the most recent season (2007).
The Delta Midi lathe, although never used, made an appearance on the Lathe 101 episode (#1707) as an example of the genre. Count that one how you will.
All of this information is in the �Norm's Tools� section of my website.
Note to R. Lance: the Unisaw has been in the shop since the beginning and has been featured in all but a handful (19, by my count) of the 247 episodes aired to date. The original was purchased in the '60s for the producer by his wife, and it was replaced around 1994 by a more current version. Although both are Deltas, the first was bought when Rockwell owned Delta and it was labeled �Rockwell Delta�. The newer one was obtained after Pentair had acquired Rockwell and the line remarqued to simply �Delta.�
Hmmmm…Show didn't start until 1992…
Rod Peterson -- Ormond Beach
>That was the original subject line for my post below. It got lost on one of several review and edit sessions.
Rod
Arrrrghh!!! Show didn't start until 1989…__
Rod Peterson -- Ormond Beach
>
it pains me
Mike Schwing from Maryland
>to watch him use a skew chisel as he does.
Note to Rod......
R. Lance in GR, Michigan
>I know...I mentioned the Unisaw less someone think he was using the Shopsmith as a tablesaw.
Re: Note to Rod......
Rod Peterson -- Ormond Beach
>Ah.
I had worked myself into full expository mode and couldn't stop.
Rod
Re: Note to Rod......
Glenn Madsen near San Francisco
>and having used the Shopsmith as a tablesaw, I can understand why he wouldn't ever want to do that, for a project of any significant size.
Mine's a disk sander now, most of the time. An expensive disk sander, but paid for, at least.
All's well....you are a man of.....
R. Lance in GR, Michigan
>many passions....and I'm proud to be a small part of your considerable and detailed listing of Norm's Tools....I think it is the only place on the internet (save here and the police) where I've made it.
I've heard it said that.....
R. Lance in GR, Michigan
>your shopsmith makes a very good horizontal boring machine and I know on a few projects I wish I had one....and hey...thats paid for too!