Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Hey Al Stokka!

Posts

Hey Al Stokka!

#1

Hey Al Stokka!

Ron Hildreth, Alta, Iowa

>A friend of mine up here in NW Iowa and I were wondering if Woodsmith has had their "show"(maybe more like an open house?) yet in Des Moines. Thought since you're closer to D.M. and probably get down there more, you might know something. We usually get some sorta notice, but nothing this year so far. Last years was around the first part of Oct., if my feeble mind serves me.

Ron in Iowa

Re: Hey Al Stokka!

#2

Re: Woodsmith show and IPTV show

Al Stokka - Cambridge, Iowa

>Howdy Ron,

Sorry for the delay in responding. I was at Woodsmith and didn't see your post until now. ;^)

Actually, I was at Woodsmith this morning when they opened at 9:00 AM. Was going to buy a Jet oscillating spindle sander. Only one they had left (discontinuing due to a coming price increase, I'm told) was the display model and I didn't want that. Had to buy a General International instead...nice machine and the only difference I can see is a spindle stroke that is 1/16" less (at 15/16") than the Jet.

Woodsmith did have the open house thingie. Mid- to late-September as I recall. I didn't go this year due to other commitments. The flyer I received in the mail seemed, to me, to suggest that their garden stuff (ponds, in particular) would be emphasized.

By the way, did you know that there is now a Woodsmith TV show? The premiere episode was Friday, Oct. 5 at 6:30 PM with a repeat today (Saturday) at 1:30 PM. From my perspective it was rather elementary but, may improve as the series progresses.

Al

Re: Hey Al Stokka!

#3

Re: Woodsmith show and IPTV show

Ron Hildreth, Alta, Iowa

>Hi, Al

We were kinda wondering about the store "show" or sorta "open house"they usually hold about this time of year, where a lot of the factory reps are there to spread as much propaganda as they can about their products/machines. Hadn't heard of there being one this year. Maybe I fell off the mailing list, even though I bought my PerformaX 22-44 from them not six months ago.

Yup-saw it today. Had to watch my Red Sox kick the Angel's a** in game two of the play-offs last night, but caught the Woodsmith show this afternoon between finish coats on a walnut hutch I'm just getting done. I agree- a little elementary, but well done for a bunch of Iowa Editors! Gotta start out on something simple so they can focus on their acting, I guess! LOL. I shouldn't say things like that, as I'd probably get in front of the camera and swallow my tongue!!

BTW- Realized that you're only about 120 miles from me, so going to have to get together one of these days for a beer/coffee. Sounds like I might be going under the knife in the near future, so might have time to run down to D.M. while recuperating. Might give ya a warning and then stop by!

Ron in Iowa

Re: Hey Al Stokka!

#4

Re: Woodsmith show and IPTV show

Al Stokka - Cambridge, Iowa

>Ron,

Ok on the visit...as long as you've stopped bleeding. Sweetie gets real upset when I bleed on the carpet. She might be a bit more forgiving with company but, hey, who want to take a chance? ;^)

I'm usually around but let me know ahead of time just to be sure. I'd hate to miss the visit.

Al

Re: Hey Al Stokka!

#5

Re: Woodsmith show and IPTV show

Ron Hildreth, Alta, Iowa

>Al,

Great!

Not sure as to when I go under the knife, as they have to do another MRI to diagnose the extent of the damage.Seems they didn't do that with the first one! I tore the heck out of my rotator cuff. Sure makes it hard to do much woodworking, and probably be a lot less for awhile after surgery. I'll make sure I'm not bleeding if I drop in! LOL!

Ron in Iowa