Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

For those who haven't been to Redmond & Son

Posts

For those who haven't been to Redmond & Son

#1

JL

For those who haven't been to Redmond & Son

JL

>They are a large tool dealer just outside the Perimeter in Atlanta, GA.

Here are some pics of the showroom.


img

Re: For those who haven't been to Redmond & Son

#2

JL

Re: Another aisle 

JL

>


img

Re: For those who haven't been to Redmond & Son

#3

JL

Re: Yet another aisle...

JL

>the warehouse area is beyond the wall.


img

Re: For those who haven't been to Redmond & Son

#4

Re: Yet another aisle...

Tom Pilsbury

>I just drooled all over my keyboard.

Re: For those who haven't been to Redmond & Son

#5

Re: Yet another aisle...

charlie belden

>Looks like CB Tools here in Silly Cone Valley.

Definitely a checking account depletor location.

A guy needs to establish three long term

relationships - one with a good mechanic,

one with a good doctor and one with a good

dentist. If you do wood working, add one

with a good hardwood supplier and one with

a good counter man at the woodworking

tools and machines store.

charlie b

Re: For those who haven't been to Redmond & Son

#6

Re: Yet another aisle...

Thomas S Stockton

>I just hope they have better customer service than CB tool had when I dealt with them.

Tom

Re: For those who haven't been to Redmond & Son

#7

Beyond that door . . .

Yonak

>. . . is long aisle after long aisle (sometimes two and 3 levels high) of used equipment (some of it in pretty rough shape). The founding Mr. Redmond was a dealer of used school shop equipment which wasn't supposed to get sold to the public, but some of it did get get out there from time to time. It's a huge place. Rockler now has a sales counter in there as well.

Re: For those who haven't been to Redmond & Son

#8

I had a friend in California.

Don Henthorn

>who taught shop in San Francisco. The district had a policy of changing out the shop machinery after it was amortized. Because of the expense of union labor to change out the machinery (they had to bring in electricians, riggers, laborers, etc.) it was cheaper to have maintenance rip the stuff out and send it to the dump. My friend would find out when the stuff was going to the dump and intercept it to get the machinery he wanted. He had the best equipped shop you can imagine. He would even sell to special friends who knew how to keep their mouths shut, not to make money but to pay for getting the stuff on to his truck and delivered to the buyer. Unfortunately, at the time I had no room for anything but the old Blount lathe which I bought for $35.00. I could have had a nice twelve inch engine lathe for $50.00 but had no place to put. You can't imagine the number of nice machines which had been well cared for and were in pristine condition that are rusting away in a dump near San Francisco.

Re: For those who haven't been to Redmond & Son

#9

Re: Yet another aisle...

charlie belden

>In response to"

"I just hope they have better customer service than CB tool had when I dealt with them.

Tom"

Had two problems with stuff bought from CB Tools. Blew out the left fence on a Makita

LS1212 SCMS. Took the broken part back to

CB Tools expecting them to order a replacement. Mario took one off a floor model, handed it to me and I was on my way.

Got the General International mortising machine, the bigger one with the XY table

and the tilting head from CB Tools. Fence

wouldn't go square to the table - not a good

thing on a chisel mortiser. Took it back, along

with an engineer's metal square to show

them. He checked the floor model for square,

found it was OK and gave it to me as the

replacement. In and out in 15 minutes, no

Where's Your Receipt, no We'll Have To

Bring This To The Attention Of The Rep -

just "this one's good - take it, sorry about

the inconvenience".

Now Laguna Tools, on the other hand, ...

They've apparently improved their customer

support significantly since my last dealings

with them.

charlie b