Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Is there another way to cut this molding?

Posts

Is there another way to cut this molding?

#1

Is there another way to cut this molding?

lee beeden

>One option is to buy the router Bit!!! In canada a 2 1/4" freud cove bit is $110 plus Tax.

I need a 1" x 1" molding strip for my cabinet with a 7/8 radius cove in it( this leaves a nice 1/8 lip or step at the top and bottom. Its part of the built up molding for the top of a cabinet, any smaller and I think the proportions wont work.

Is there any other way to cut this molding, or do I have to buy the router bit?

Thanks

Lee

Re: Is there another way to cut this molding?

#2

For hundreds of years

Neal in San Jose

>all molding was cut with hand planes. A user round plane can be had for significantly less than the cash you are talking about. And, hand planes are lots of fun. However, they are also like peanuts, you can't have just one, so the router cutter may actually be cheaper long-term!

Another option is to cut the cove on the table saw. I've never done it, but there are people on this board that have, and hopefully one of them will chime in with the proper instructions.

Re: Is there another way to cut this molding?

#3

Re: Is there another way to cut this molding?

Garrett in Victoria

>I'm in the process of making a couple of extension leaves for a Chinese dining table, and the aprons have unusual coves and beads. None of my collection of router bits would do the job in anything close to a single pass, so I broke everything down into components that enabled me to make the profiles with the bits I had, and then glued the several parts into a whole.

In your case, could you not make 2 passes with a standard 1/4 round cove bit or make a single pass on 2 1x1/2" strips and glue them together?

Cheers, Garrett


img