Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Walnut ladle

Posts

Walnut ladle

#1

Walnut ladle

Mik eSchwing from Maryland

>This is a tall black walnut ladle, maybe 18" tall. No finish, just sanded to a high grit. Very thin ladle, about 1/8" or less for most of it. The long slender handle is actually rather stout. For display only of course in some rich lady's kitchen probably. It will probably get mounted on a wall hanging display stand of some sort yet to be determined. Comments welcomed.


img

Re: Walnut ladle

#2

Re: Outstanding as usual!

Darrin

>I think I'll just call it a night!

Darrin

Re: Walnut ladle

#3

Re: Walnut ladle

Keith Newton

>Mike, Nice work. I have a new gallery opening coming up soon, and need some smaller faster objects. Seeing these has given me some inspirations.

Re: Walnut ladle

#4

Re: Walnut ladle

Martin from Granbury

>Mike,

It looks really delicate. How did you make it? All hand tools?

What about the "cup"? Did you rough it out with forstner bits?

I have never tried anything like this, but your work is impressive.

Martin

Re: Walnut ladle

#5

Re: Walnut ladle

Mike Schwing from Md.

>Thank you Martin, Keith, Darrin

Martin, no forstner bits. For the hollowing I use a Foredom flex shaft with a 1/4" shaft carbide ball just like the one pictured below. I wrote a complete start to finish article on these spoons a few years ago for Woodcraft mag, you could find the article I'm sure if desired. Most of the entire spoon is crafted with that same bit, but I use others, too. Those carbide bits cut impressively well but they have to be used carefully as they are very finicky about grain orientation, as opposed to the other common types of carving bits. I do a lot of the handle with a drawknife, files and rasps of various sorts. Hope that helps some.

Re: Walnut ladle

#6

forgot pic

Mike Schwing from Md.

>Sorry. Here is the bit I use mostly on the interior of the spoon.


img