Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Guitarzan and the guitar stand Questions

Posts

Guitarzan and the guitar stand Questions

#1

Guitarzan and the guitar stand Questions

Barry Irby

>My brother fancies himself a musician and plays in a band. Has about seven guitars. I am not a musician, almost the only musical instrument I have mastered is the radio, but I am winning because I have eight.

I would like to make him a guitar stand for Christmas. I have been studying the ones in the WoodCentral Contest from 2004. What great work. I am stealing an idea here and there, so this is not plagiarism, it's research.

Does anyone know how wide the "yoke" would have to be for the guitar to hang in it? I realize there would be differences, but because they must have some relationships the the "hand" they must be fairly consistent. Also, how tall would the stand be for the guitar to hang in it? I know bass guitars are longer but that's about all. How long are they? Either one.

Re: Guitarzan and the guitar stand Questions

#2

Re: I have a commercial stand.....

Jamie Donaldson

>...for my Guild 6 string that has a neck holder width of 3", and height from cradle to neck holder is 24". These would be about average specs for most guitars- my 12 string fits it as well.

Re: Guitarzan and the guitar stand Questions

#3

They don't hang by the yoke

Mark Goodall - ATL - tooljunkie

>Also, how tall would the stand be for the guitar to hang in it?

Barry, unless I misunder-STAND the question, guitars don't hand from the "yoke". In stores they hang from these U shaped brackets that wrap arund the neck and the head sits on the top and it hangs like that (assuming that's what you mean by "yoke").

Bu in a guitar stand, that U shaped bracket (yoke?) just holds the neck in position. It doesn't support any weight.

The distance from the far end of the guitar (part closest to the ground when pointing up) and the base of the head of the guitar neck varies greatly on the style of guitar. It's not feasible to have a guitar hang from the "yoke" up ther and also be supported at the bottom.

Hope this helps.

I have store bought stands from my store bought guitars, and I have store bought stands for my homemade guitars, too. Never built a stand.... yet.

Happy Woodworking!

Re: Guitarzan and the guitar stand Questions

#4

Re: They don't hang by the yoke

Barry Irby

>The obvious thing to do would be to talk to my brother about this, but then it wouldn't be a surprise would it?

I was thinking about this (a dangerous activity, especially when you have as little information as I do) and it seemed to me that the guitar should hang from the small end where the adjusting or tuning pegs are. (are you laughing at my ignorance yet?) This would put the small end up and the big end down. To me it appears that the dimensions of the neck(?) would be most consistent at that point. Everything else changes. The length of the whole thing. And the shape fo the body. Some are symmetrical and some are not. Some are electric and some are acousitic. (Would have posted this on the Hand Tool Forum but I thought they might be horrified at the thought of electric guitars.)

So, I am trying to come up with a design that would allow many guitars to hang from a yoke or fork at the top and just rest against the legs at the bottom. The other possibility is to put a couple of pegs near the bottom for the guitar to sit on and let the fork just keep it from falling over. This seems to be more normal, but doesn't it eliminate using the stand for an electric guitar that is asymmetrical?

Re: Guitarzan and the guitar stand Questions

#5

Re: They don't hang by the yoke

Dan Donaldson

>Go to a music store and look at the hangers that they use. If you can, measure them and note the construction. That should give you an idea for the mechanics of the device, then you can figure out how to add the artistic part.

Re: Guitarzan and the guitar stand Questions

#6

Re: They don't hang by the yoke

wilbur

>As someone who has been playing guitar for over 25 years, I can say that I have never seen a floor stand for a guitar that suspends the guitar from the neck. They all support the guitar from the bottom, and the neck support is there simply to keep it from falling over. Even multi guitar stands work this way. In fact, there are guitar stands that do away with the neck support altogether.

There are systems for hanging a guitar on the wall that suspend the guitar by the neck, but I don't think that is what you are trying to make.

Re: Guitarzan and the guitar stand Questions

#7

The only way.....

Mark Goodall - ATL - tooljunkie

>The only way to make a stand that supports the weight of the guitar at the headstock (top of the neck) AND the bottom of the guitar at the same time is:

- Make a custom stand for that guitar only.

- Make the neck support adjustable, so you can alter the distance.

In fact alot of storebought stands are adjustable like that, but it's not to move the top support up to support weight, it's only to palce the top supprt in a better place near the top of the neck. They are also adjustable to handle a variety of different sized guitars. But still not to support weight at the neck.

If you find 50 guitars, I'll show you 45 completely different measurements from the base of the guitar to the headstock at the top of the neck. They really do vary that much. Not only does the length of the neck vary, but the shape of the headstock (how quickly it flairs outward) will affect the distance, as well as the shape of the guitar.

A guitar stand will have three points of contact, shape like a triagle. Two at the bottom, on at the top. But on the two at the bottom support any weight. The top point is only to keep the guitar upright.

The only stands that hang the guitar from the headstock at the top of the neck are the display stands in music stores, which are not too different from clothes racks in department stores.

Happy Woodworking!

Re: Guitarzan and the guitar stand Questions

#8

Hanged by the neck

David Yoho

>Kinda reminds me of an old Clint Eastwood movie.....

Anyway, my son has a floor stand that holds three guitars (he still stores a forth in its case). They all hang from the top of the neck and have padded rests that come in contact with the back of the bodies. There's no support from the bottom. This is probably due to so many guitars these days having irregular shaped bodies.

David

Re: Guitarzan and the guitar stand Questions

#9

Lee Gordon

Re: Guitar stand (WARNING: Big Pix)

Lee Gordon

>A friend of mine briefly attempted to market high end display cases for guitars. For the project he had some specially designed brackets designed and fabricated.

Photo Sharing and Video Hosting at Photobucket

Here's a view of the brackets from the side:

Photo Sharing and Video Hosting at Photobucket

And here's a view from below:

Photo Sharing and Video Hosting at Photobucket

If you're interested, I can ask him if they are available.

Re: Guitarzan and the guitar stand Questions

#10

Re: only 1 minute 15 seconds on dialup.

Al Stokka - Cambridge, Iowa

>