Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

cabinet building books

Posts

cabinet building books

#1

cabinet building books

Mattank

>I do a lot of custom woodworking on large private yachts and a little furniture making too,just to give you a little idea of my level of knowledge. We are building a new home and I will be building my kitchen and bathroom cabinets. I would like to read up a little to find out some info like standard sizes for openings, and other dimensions that are used in home cabinets. I will be building face frame style. Also maybe some tips for sizing them for a specific amount of space.. Thanks for any suggestions. Matt in Fl.

Re: cabinet building books

#2

Re: cabinet building books

Clint Searl, at the base of Haycock Mtn

>There's a book by Jim Tolpin from Taunton that you might find useful.

Clint

Re: cabinet building books

#3

Re: cabinet building books

Jim Dillon

>Matt,

Several books that were helpful to me prior to building our kitchen cabinets were:

Danny Proulx, "Building Your Own Kitchen Cabinets", Popular Woodworking Books;

Paul Levine, "Making Kitchen Cabinets: A Foolproof System... ", Taunton Press; and

Jim Tolpin, "Building Traditional Kitchen Cabinets", Taunton Press.

Each has a different focus and are complimentary to one another. Proulx's and Tolpin's books focus more on traditional cabinets whereas Levin's book describes the European style. Having said that, Proulx uses a unique hybrid construction that combines the efficiency ans space saving techniques of European construction with the traditional face-frame approach. I used his approach and like it. Levin's book also has a nice section on using and working with countertop laminate.

Regarding sizing, traditional sizing is based on the most efficient use of a 4 x 8 sheet of plywood, the height of kitchen appliances, and the thickness of the normal kitchen countertop. This means that the bottom cabinet will be roughly 24 inches wide and 32 inches tall (give or take) and top units will be 12 inches wide (give or take) by whatever height you like or your ceiling dictates. But this is not cast in stone. For example, because my wife and I are tall, I made one bank of cabinets 38 inches (total) tall and the other bank 40 inches tall. And for the upper cabinets I think I made them an inch wider than normal to accommodate larger dishes. Keep in mind that if you do depart from the "traditional" sizes, you will also have to elevate your appliances. Hope this helps.

With your experience, you should have no problem.

Jim

Re: cabinet building books

#4

Re: cabinet building books *LINK*

Bob Lang

>You might like this:


WoodCentral Book Review

Re: cabinet building books

#5

Re: cabinet building books

R. Lance in GR, Michigan

>don't know your timetable for building the cabinets, but this seasons New Yankee Workshop will be centered around a 9 episode series on making kitchen cabinets/kitchen remodel...this would be great for you except PBS probably can't go 9 weeks without a fund drive so it may take awhile to see these shows.

Re: cabinet building books

#6

Appreciate.....

R. Lance in GR, Michigan

>if no one points out that there is a difference between a TV show and a book....I'm clear on that....thanks.

Re: cabinet building books

#7

Re: cabinet building books

Jesse in New Mexico

>Good books mentioned above. One thing I would add is to never, ever, assume the measurements in drawings are correct. For some reason, editors will fix grammar errors but are oblivious to dimensional errors.

Since you typically cut up all the parts at once before assembly, a couple of typos in a book can make a lot of waste.... DAMHIKT ;^)

Re: cabinet building books

#8

Jim in Burlington Ont.

Danny Proulx

Jim in Burlington On

>I like Danny's books. That said there's nothing like going into a kitchen design place with their software package. Personally I really like the look of upper cabinets with staggered heights.

Re: cabinet building books

#9

Re: cabinet building books

Mattank

>You guys are great! Quick responses and very helpful, Im off to order a couple, HHMMMMM but which two?????? Thanks a bunch,, Matt in Fl.

Re: cabinet building books

#10

Re: cabinet building books

Jack

>Matt

Jack here. I'm a cabinet maker in MS. I sent you an email. Thought I'd let you know out here in case it gets caught in the junk mail folder. Regards

Jack