Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

OT - need craft ideas for scouts

Posts

OT - need craft ideas for scouts

#1

OT - need craft ideas for scouts

John E in SC

>I help with my son's Webelos den (4th and 5th grades), and we're getting ready to start the "Craftsman" badge. They have to make 2 simple wood projects (which I'll have no problem with), but also 4 other projects with materials OTHER than wood. That's the area where I'm looking for suggestions (hence the "OT"). So far I've come up with making homemade modeling clay to make a bowl or cup, and maybe using aluminum flashing to make a "tin-punch" pattern, like a Christmas ornament or something. Any other ideas you might have would be greatly appreciated. Materials can be basically anything - paper, plastic, rubber, rope, metal, wire, etc., but the project should be useful, and should involve several steps (not just decorating a tin can and calling it a pencil holder, for example).

Thanks in advance,

John

Re: OT - need craft ideas for scouts

#2

Re: OT - need craft ideas for scouts

Robert Henderson

>If you can combine materials within a project, how about...

A decorative medallion made of bakeable polymer clay used as an inset in a box lid

A punched tin decorative feature on bookends.

A picture frame with a rope border glued onto the edge.

Re: OT - need craft ideas for scouts

#3

Re: OT - need craft ideas for scouts

JohnKJordan in East TN

>Lee Valley offers a book of "classic" crafts for boys age 6 to 14:

http://www.leevalley.com/wood/page.aspx?c=2&p=32895&cat=1,44178&ap=1

Also, Sir Google responds nicely with ideas if you ask him to search for "boy scout crafts" (without the quotes).

JKJ

Re: OT - need craft ideas for scouts

#4

Re: OT - need craft ideas for scouts

Eric from Little Rhody

>I'm doing the Craftsman badge for my son's Webelos group, too. Last year, I had the Scouts make arrowhead-shaped leather neckerchief slides, from kits available from the Scout Shop (or online). They were able to do them in a couple of hours (would have been less, but they spent half the time fooling around like usual :-). The slides cost less than $2 each if you buy them in 8-packs.

Re: OT - need craft ideas for scouts

#5

Re: OT - need craft ideas for scouts

Paul Woolson

>A couple of thoughts:

We once made giant clothes pins out of plastic. We had a mold and poured resin into it. We were able to encase pennies and the like. That was the most useful project that I made as we put it on our kitchen counter and used it for "Mom, I'm at Joe's" type notes. (life before cell phones)

I also went to a class where we took round (maybe 8" diam) copper and pounded it into a bowl. Pretty useless project but the pining experience was fun.

Re: OT - need craft ideas for scouts

#6

One of our cooler ones . . .

SteveM

>was sheet metal forming. Dad is / was a tool & die maker. He came up with some forms for use useing plywood. One peice was just flat. On top was another with a big hole and small depresions around the top. Actually it was an ashtry form. This was in the day ( 60s ) when smoking was'nt all that evil yet. He then handed out the round blanks. Gosh, we spent hours makeing a racket with metal and ballpeen hammers. But, I'll say, we learned the basics of metal forming ( streaching, bending, burnishing, etc ) at a tender age. With smoking now taboo I'm sure some other simple formiing project might be thought up wich only requires a rather simple form. And allow me to say . . .as an old Eagle Scout, God bless you for your time and effort for such a noble cause !

Re: OT - need craft ideas for scouts

#7

Re: OT - need craft ideas for scouts

Larry Clinton

>Might make a small mold (or use a plastic container) and fill a couple or three inches deep with mortar / cement. Glass or plastic chips can be pressed into the wet material and used to decorate and / or spell out messages like 'Welcome to my Garden", Welcome or other items. These can be used in the Gardens or landscaping.

Re: OT - need craft ideas for scouts

#8

Re: OT - need craft ideas for scouts

Lee Ohmart

>My advice is to keep it simple and make it useful. The most memorable craft projects I recall from my years as a scout were making things that people could and WOULD actually use. I still have the broom holder I made for my parents. It was made with a simple chunk of a 2x4 using a wood rasp. I still have and use the rasp, too! I also recall making bird houses and feeders that we put up in the back yard. So, it doesn't have to be real complicated. I, too, remember whacking out those ash trays. I bet with a little design change they could be small dishes to hold snacks. Just remember to give the adults some ear plugs. At scout camp we could hear that racket all the way down to the waterfront. If you have some crafts artisans in your area, they could be an invaluable source of inspiration and teaching. I also remember all the useless crap we made with plater of paris, plastic gimp, beads and that trashy leather. None of that remains either as an artifact or a fond memory.

Re: OT - need craft ideas for scouts

#9

Re: OT - need craft ideas for scouts

Sonja Lemon - Sacramento CA

>How about lanyards, key fobs, etc, made of flat plastic cord. The word lanyard is very broadly interpreted on Google. They were either square or spiral braid and they last a life time. Supplies are available at most craft stores, Scout House, or Leather supply stores. Sonja

Re: OT - need craft ideas for scouts

#10

Darrell in Oakville

Re: OT - need craft ideas for scouts

Darrell in Oakville

>Hi John,

Crafts for Cubs, eh? One that I did with my son's Pack was a Christmas Tree kind of thing. I sawed up some little tree shapes from 4/4 stock and then cut some paper birch branches into short half-log shapes. Then the fun begins. Sand the edges of the tree, and then use the spoke pointer to taper the end of the 'trunk'. The hollow auger is used next to produce a tenon (makes the trunk round). Finally, an auger bit (which matches the hollow auger) is used to bore a hole in the birch. Glue the tree into the birch base, decorate it and voila!

Yah, I know it looks tacky as anything, but it gives the Cubs a chance to use some tools that many people would not ever have the chance to see in action. And it helps to have three sets of these in your shop so you can keep the whole group busy... 18 braces is NOT excessive!

Darrell

ex-Akela, 1st Bronte Cubs


img

Re: OT - need craft ideas for scouts

#11

Re: OT - need craft ideas for scouts *LINK*

Nathan Pettigrew

>How about paper/card modeling? There are hundreds of free downloadable models of every subject (ships, planes, cars, robots, spacecraft) you can think of.

Check out the Card Modeling FAQ for links.

Nathan


Card Modeling FAQ