Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Tablesaw Accidents

Posts

Tablesaw Accidents

#1

Tablesaw Accidents

Robert R Clough - Thorncraft

>I just re-read Denis Chenard's 2003 article on accidents. I re-read it because on Thursday I was careless when angle ripping a small piece - smaller than a brick. I was not using a push stick and I use a European/short fence. My attention wandered for a split second; the piece kicked back with the sharp wood edge slicing open my thumb and giving me a bad abdomen bruise.

After using several bandaids (always kept in the shop) simply to bind together the thumb, I drove to my Doctor's - clinic - office. Jim said he didn't do stitching and got the Nurse Practitioner. She took 7 stitches, bandaged me up, scolded me, and sent me on my way.

I am lucky in that's all that happened.

Careless, inattentive, and stupid are the words best describing this incident.

Re: Tablesaw Accidents

#2

Re: Tablesaw Accidents

Dave Bair, Eaton Rapids, MI

>Sorry about your mishap. Luckily, you seem to have come out okay. Thanks for posting, though, it keeps the rest of us thinking saftey. I haven't had an accident since 2003 when I lost the tip of a finger to my jointer. Thinking saftey becomes a little more routine after something like that. I bet this will be your last accident, too; once burned, etc..etc.

Re: Tablesaw Accidents

#3

Re: Tablesaw Accidents

George@Colonel's Workshop-Havertown PA

>Good Afternoon Robert,

Sometimes novices can actually be more careful. Getting stitches is only fun if the doctor or nurse is both nice and nice to look at. The last time I had to go to the emergency room (3 stitches), the lady doctor was a real doll. Admittedly, I would never have had the chance to see her if I had kept my eyes and mind on the work. I got stitched up real fine, and had to give her a "thumbs up". :<) Heal thy self and return to the saw.

George

Re: Tablesaw Accidents

#4

Ellis Walentine

Sorry for your incident, Robert

Ellis Walentine

>As I approach geezerhood, I'm realizing that I'm not as sharp as I was in my 20s. The mind doesn't want to accept such unpleasant truths, but it is a worthwhile corollary to the rules of tablesaw safety. Nobody's getting younger and there isn't enough ginko biloba on the planet to keep you sharp as a tack forever.

Heal well and quickly.

Ellis

Re: Tablesaw Accidents

#5

Re: Table saw Accidents

albertabob

>After much procrastination I finally purchased my first Grr-ripper.

I was a skeptical push stick devotee and feather board user prior to this and have only had one kickback in 30 years.

After I sat through the DVD tutorial I made a few cuts with the new toy to see what it can do.

Not only can I cut the tough cuts but in addition. they are more accurate.

I cut 2 X 8 inch strips of oak at 1/4 x 1/4 pus 3/8' set and and 1/2" set yesterday without even a remote chance of a kickback.

I would never do that without the Gr-ripper.

If you get a chance sit through the DVD.

Bob

bx-joint

Re: Tablesaw Accidents

#6

Ah Ginko Baloba! Ellis, Do You Think.....

George@Colonel's Workshop-Havertown PA

>we could convince Scott's Sharpening Service to provide some with each returned blade. It makes sense to keep the mind as sharp as the blade. :<)

George

Re: Tablesaw Accidents

#7

Answer to Ellis and Bob

Robert R Clough - Thorncraft

>Bdecause of high blood pressure I can't use Ginko Biloba.

I do have a Grrrrrripper but I use it only on the Router table. I have other push sticks, some rather fancy, I Usually Use (!!!!).

Went back out this afternoon and recut the piece - all is fine.

Re: Tablesaw Accidents

#8

Thats how we learn sometimes

Mike Schwing from Md.

>Glad you weren't hurt more seriously. Sometimes an accident is the best way to learn just how much respect some of our tools demand. When I was a real novice at this I crosscut a small piece of bloodwood using the fence and it kicked back and hit me square in the chest, knocked me out and left a permanent impression in my chest. I probably should have died as it could have easily stopped my heart. Never did anything of the sort thereafter again!

BTW, the GRRIPPER is the most valuable tool purchase I have ever made.

Re: Tablesaw Accidents

#9

Re: Tablesaw Accidents

Denis Ch�nard, Orl�ans, Ont.

>Sorry to hear about your accident, glad you didn't get hurt badly...

It's the thing I wanted to convey with that article, that accidents can happen to anyone. Inattention (a split second is enough), wood with tension in it, operations that the user might not realize the inherent danger out of ignorance, etc., will get you at some point.

If I recall properly that article stemmed from a debate here on WC at the time. There were (an still are) persons here that decline to use safety equipment, as they've done it all their lives without a problem. My answer to this is "yet"...

Heaven forbid the mention of mandating safety equipment...

Heal well,

DC

Re: Tablesaw Accidents

#10

This ritual has worked for me for years. .........

Art Silva

>Whenever I go to my shop to work, the first thing I do is stand in front of my 1963 Unisaw, look it right in its blade and I say: "Not today you SOB. It does not matter what I plan to do in the shop. My purpose for going could be just to clean up, ha! ha! The reason you are there means nothing, it is the mind set set that you re-enforce while you are there. Of course my inventory list of safety equipment lacks for nothing. Two Grippers are at the top of the list. Work safely everyone.

By the way Robert, what were you thinking of when you were attacked by your saw? Was it ancient history, modern history or the morass you Historians face when you try to write the history of this new millenium? Good luck. Art

Re: Tablesaw Accidents

#11

Re: This ritual has worked for me for years. .....

Dan Mitchell

>Art-What do you mean by a "gripper"?

Dan

Re: Tablesaw Accidents

#12

Jump up 5 posts to albertabob for picture.. .....

Art Silva

>

Re: Tablesaw Accidents

#13

Re: Jump up 5 posts to albertabob for picture.. ..

Credns

>Where do I get information on the "Gripper"?

Re: Tablesaw Accidents

#14

Look here  *LINK*

Dan Donaldson

>


Gripper