Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

how to keep white birch log from rotting

Posts

how to keep white birch log from rotting

#1

how to keep white birch log from rotting

regis

>Good morning! I came across this website while looking for information on how to keep white birch logs from rotting.

This is for an indoor application. I have two nice pieces of white birch, cut last February, which I want to use as pedestals. When the tree was cut last winter, I kept a large piece of the log in enclosed porch, where it was protected from snow and rain, but was subject to temperature changes.

The log was cut into two pieces about a month ago, and both pieces are now indoors. One piece is 2�� and the other is about 3� high. I understand that white birch bark is water impermeable, so what happens is that a log can rot from the inside out. I placed a metal sculpture on one piece, and sure enough, when I kved the sculpture, I saw mould growing underneath� so I�ve left the log lying on its side to dry out for awhile. (Not sure how long that will take!)

Is there a way to preserve a birch log intact, so it doesn�t rot?

Many thanks for any advice you can offer.

regis

Re: how to keep white birch log from rotting

#2

The solution:

Malcolm Timbers

>All you need to do is to poke a hole through the log. I got so good at it after a while that I could shoot a shipright's drill bit into a 30" log form both ends and hit the hole coming from the other side. A little air going through the hole will dry it out nicely. I was using the logs for rustic table legs. If the hole is going to affect the appearance, you can plug it later with a dowl.

Re: how to keep white birch log from rotting

#3

Re: The solution:

regis

>Thank-you, thank-you, thank-you, Mr. Timbers! Any particular size of drill bit? Would 1/4" suffice?

Re: how to keep white birch log from rotting

#4

Re: The solution:

Malcolm Timbers

>The bigger the better. It would depend upon the size of logs you are drying. I used a 3/8" iit for 4" - 5" diameter table legs. But if the log was large, I would use a 1" bit. You'll need a hose and a fan to get some air circulation through the hole to dry it out. However, I just hung the table legs up from the purlins in a greenhouse where it would get to about 100 - 140 degrees F during the day. Hot enough to kill any mould and dry the logs out.

Re: how to keep white birch log from rotting

#5

Re: The solution

regis

>The logs are 7" diameter... I'll go with a 1" bit. Thanks again for the advice!

regis