Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Cherry Box

Posts

Cherry Box

#1

Cherry Box

Lee Schierer - McKean, PA

>My wife and I were recently on the committee for our 40th high school class reunion. It was determined that we needed to do a Chinese auction for a fund raiser to help defray costs. She volunteered me to make some thing from wood and found a similar box in a gift catalog. The box is pretty easy to make. The difficulty was getting the corner angles at precisely 45 degrees so that the corners closed up perfectly. The hinges are brass pin hinges. The sides of the box are cherry crown molding. The top is the last of the salvaged cherry mantle piece I recovered from my neighbor. Two pieces were resawn from the block and book matched to make the top. The finish is Deft semi-gloss clear wood finish with about 2 weeks of sun exposure. The box was highly sought after at the Chinese auction.

Thanks for viewing

Lee


img

Re: Cherry Box

#2

Very pretty Lee

Steve in Fresno

>

Re: Cherry Box

#3

Re: Very nice! Now a question

Glenn Madsen near San Francisco

>What's a chinese auction?

Re: Cherry Box

#4

Re: Cherry Box

Brian In Dawson Creek

>I admire the box design and your post other than the part where you say �the box is pretty easy to make� come on spill the beans on the side profile, cherry crown molding doesn�t cut it � how is it made.

A very classy box indeed.

Brian

Re: Cherry Box

#5

JL

Re: Nice box, size please?

JL

>

Re: Cherry Box

#6

Very nice!

Jim Dillon

>Lee,

I can appreciate your comment regarding lining up the miters. I once made a humidor from 2 1/2 inch (6.4 cm) thick stock (the sides were eventually angled) and quickly found out that the corner miters really had to be spot-on as there was no "give" during glue-up.

Anyway, a very nice box that I hope went to an appreciative bidder. Thanks for posting.

Jim

Re: Cherry Box

#7

Instructions for a Chinese auction

Lee Schierer - McKean, PA

>1. You get a bunch of stuff donated that people might want.

2. You put all the items on a table with a can, cup or bag in front of the item.

3. You sell tickets to people usually about $1 apiece.

4. The people look over the stuff and put one or more tickets into the container by the item.

5. At the preset deadline, someone draws one ticket out of the container for each item. The person that holds that ticket wins the item.

You can sometime win valuable stuff for a minimal investment.

Lee

Re: Cherry Box

#8

Re: Cherry Box

Jim Shaver - Oakville, Ontario

>Beautifully done Lee,

Cherry has a habit of looking just right no matter what you make with it...those miters look perfect from here.

My Best To yourself and Sue,

Take care,

Jim

Re: Cherry Box

#9

Re: Cherry Box

Fred West in West Chester, PA

>Lee, what a beautiful box and how nice of your wife to volunteer you. :o) Fred

Re: Cherry Box

#10

Re: Cherry Box

George@Colonel's Workshop-Havertown PA

>Good Morning Lee,

I bet it took you longer to line up those miters than it takes me to line up my children! You were obviously successful: Nice Job.

George

Re: Cherry Box

#11

Re: Nice box, size please?

Lee Schierer - McKean, PA

>The box is about 10" wide, 13" long and 5" tall.

Lee

Re: Cherry Box

#12

Re: Cherry Box

John in Calgary

>These really are easy to make, there was an article in Wood magazine from a few years back (and a reference in last month's Wood magazine where they applied a special finish to one). Like Lee said, hardest part is getting the 45s right so the corners close up properly.

Have a look at the box closely, you'll notice the sides are crown moulding mitred at 45 (lay crown moulding flat on your mitre saw/table saw, bevel at 45). Then you trim the bottom cove on your bandsaw to give the look of feet.

Add a dado inside for the bottom and cut a top for the box.

Re: Cherry Box

#13

Re: Cherry Box

John in Calgary

>Since boxes are your big thing, let me know if you would like me to find the article and scan it for you.

John

Re: Cherry Box

#14

Close!

Lee Schierer - McKean, PA

>I made a jig for my router to do the feet. It made the feet cut outs all the same and required much less clean up than a band saw. To get eth 45's right, I cut all teh pieces a little long and then did a trial fit of all four pieces. Once I had it fitted up I could see how the miters looked and made a couple of sligth adjsutsments to the TS and trimmed each piece until the angles matched perfectly, then I cut them to the final length I wanted.

Lee

Re: Cherry Box

#15

Re: Cherry Box

Brian In Dawson Creek

>Yes please if you don�t mind, my email address is dawsoncreek_brian@yahoo.com

Re: Cherry Box

#16

Re: Cherry Box

John in Calgary

>I'll try to track it down this weekend, although I might wait until work on Monday to scan it (we have one of those fancy new photocopiers that scans to email too).

John

Re: Cherry Box

#17

Re: Cherry Box

John in Calgary

>Its on its way (just in case you don't check that email account very often).

John

Re: Cherry Box

#18

Nice Box

Wayne Carson "TX"

>Nice Box thanks

Re: Cherry Box

#19

good job

Mark Valsi

>Good proportions, good wood selection, good job