Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Oak Spindles

Posts

Oak Spindles

#1

Oak Spindles

Glenn Goins

>I'm trying to restore to usable condition an old oak (could be ash or hickory) rocking chair we retrieved from the ancestral family farm in southern Indiana. I'm having difficulty finding a couple of the decorative spindles I need to replace a broken seat support and a leg stretcher. None of the local wood workers' source outlets here in the Valley seem carry these or similar items.

It looks like both were turned from one-inch stock. One of the spindles (14-1/8" overall length -- 12-5/8" plus 3/4" on each end) is sawn about halfway through lengthwise and affixes to the lower edge of the front seat portion of the chair before the ends fit into drilled holes in the chair frame. The other is roughly 15-3/4" overall length, including the 3/4" ends that fit into the chair frame. I wonder if there are any of your members nearby who could fabricate replacement parts for me at a nominal fee?

I live in west Chandler (Rural & Ray); (480) 940-4080. Thank you for any assistance you may provide.

Glenn Goins

Re: Oak Spindles

#2

Re: Oak Spindles

Barry Irby

>Try also posting this on the Turning Forum (In the Red Bar at the left). Might have better luck.

Re: Oak Spindles

#3

a solution to your problem

Bill Tindall, E.TN

>Janice Manuel

Janice is a profession turner that does just exactly this sort of job. She was doing 4 spindly oak spindles the last time I saw her.

Re: Oak Spindles

#4

Nominal fee?

Don Henthorn

>Most old chair spindles were proprietary designs of the company that produced the chair. You are not likely to find them as stock items in some hardware store. Turning special spindles such as yours requires someone with the lathe, tools and know-how to duplicate them. You may find a hobbyist somewhere who will turn them for fun. Otherwise expect to pay a REASONABLE fee for the work you want done.