Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Cummins Tools??

Posts

Cummins Tools??

#1

JL

Cummins Tools??

JL

>Got a flier in the mail the other day from these people. They are coming to our local civic center for a "truck load" sale. They do have a url (http://www.cumminstools.com/). I don't have any Ryobi tools, though I do have a Ridgid Shop Vacuum.

Should I bother going? I hadn't really heard about this outfit.

Re: Cummins Tools??

#2

Steven Antonucci

If it's real close to home...

steve antonucci

>It's kind of fun to walk through. They work like a giant rolling flea market for crappy tools, but you can put your hands on all of the stuff and decide if it's "good enough" for your use.

When they come into town, I always go, but I don't buy anything big or expensive...

Steve

Re: Cummins Tools??

#3

Re: Cummins Tools??

Dave's Not Here

>I'm not sure about the Ryobi stuff but the Ridgid stuff they sell is all reconditioned tools. Their own line of tools is comparable to Harbor Freight stuff.

Re: Cummins Tools??

#4

Bought a Cummins Drill For #1 Son

George@Colonel's Workshop-Havertown PA

>Good Afternoon JL,

A few years ago our dear friends at Harbor Freight had a special on Cummins 1/2" VSR drills, and I bought one for my #1 son GIII. I related the Brand Name to people who made diesel engines and assumed it had to be rugged. The old saying "assumptions kill you" is applicable. It was a cheap tool at a cheap price and didn't last but a year in very occasional use. Of course I may have bought the sole defective tool in the lot! But, I wouldn't bet on it. :<)

George

Re: Cummins Tools??

#5

JL

Re: Does 5 miles count??

JL

>They are going to be close. Our "civic center" is about the size of a basketball court for a small high school. Hmmm. I would like to pick up some filters for my Ridgid shop vac.

Re: Cummins Tools??

#6

Re: Cummins Tools??

Ron Hildreth, Alta, Iowa

>JL,

I shy away from Cummins tools ever since I bought an orbital jig saw from them. Saw still works great, just that I can't get blades for it anywhere. I found that the only blade that comes close is the Bosch blades, and even then I have to do a little grinding with my Dremel tool to get them to work. I just bought a new Bosch as a replacement rather than going to the hassle. Anyone want a hardly used bladeless jig saw?

Ron in Iowa

Re: Cummins Tools??

#7

Re: Cummins Tools??

Robert R Clough - Thorncraft

>I have been to their "show" twice. Each time I picked up items such as sandpaper, clamps, a "come along", and a corn knife. Oh yes, also a pellet pistol. I looked over their tools very carefully - no thanks. I did not go this year.

Re: Cummins Tools??

#8

Re: Cummins Tools??

Larry Clinton

>Well, if you go to Big Lots, Homier, or purchase from Harbor Freight you should go. I do find some items in this type of merchandise that is suitable for me. For instance, I purchased a pressurized sand blaster for < $50 that did the job I needed it for, still works and I bought it for a third of a quality unit that I probably would have used once. I wouldn't have bought it there if I wanted or needed a really "good" unit that I would use frequently. I bought a Pinner from Harbor Freight that so far has exceeded my expectations. For $12.95 including several thousand pins, its not a Grex or Porter Cable, but works very well. I have purchased the ratcheting straps for my trailer from Homier, (12' straps) for $.99 each. Works well for a while then I toss them. Usually lose some anyway so durability isn't an issue. I have "good" strong straps I use for valuable items, but they cost around $20 each - several little ones at $.99 work almost as well. I don't consider any of their tools an investment, but if you need a half inch drill for one task - the price is right. Sometimes I buy a cheap tool just to see if I will use it - if I do then I can replace it with a quality unit and toss the HF or Cummings with little loss. (Sometimes they work well enough I don't replace them).

Re: Cummins Tools??

#9

Re: Cummins Tools??

Pete in Holland, MI

>Them, like most of the cheap tool sources, need to be reviewed carefully. Yup, they are fun to go to, but using these guidelines have kept me out of trouble:

1) If the product has to operate, plan on it not for long.

2) If good steel is needed for the product to function, plan on not having any.

3) If the product works by just sitting there, you'll probably do all right.

Pete