Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

red oak question

Posts

red oak question

#1

red oak question

Bruce, a MN Galoot

>I'm a cheap bastuhd, and I'm able to get my oak from a local sawyer who also kiln dries it. Did I mention cheap?

In the last batch of oak, there are a couple of small, but pronounced, red streaks in the grain. What causes these? Are they something to be concerned about?

Thanks

Bruce

Re: red oak question

#2

JL

Re: red oak question

JL

>Are they near a knot? I have some boards that were similar (see pic). I also have some that are long streaks. I always figured they were some sort of reaction wood or related to the bark.


img

Re: red oak question

#3

Re: red oak question

Keith Newton

>If it is not grain related, it most likely has something to do with an injury to the bark / cambium / phloem layer while the tree is growing. This allows more air to reach the sap, which oxidizes the dissolved nutrients as they flow past the injury.

This shows up more red the fresher the wood is, but those reds always seem to turn dull brown in oak after it is exposed to light, so don't go getting too excited about it. This is just one of the benefits that we the makers get by working the wood that those who just live with our products later don't get to appreciate like we do.

Re: red oak question

#4

Re: red oak question

Bruce, a MN Galoot

>the streaks on my boards don't appear to be close to a knot, but that part might have already been cut off. It looks to be the same shade of red, though.

Bruce

Re: red oak question

#5

Re: red oak question

Bruce, a MN Galoot

>This explanation seems good to me. It's good to know it's not a defect, and it seems to stain well enough so as to not be noticeable.

Thanks.

Bruce

Re: red oak question

#6

As to not be noticeable ?

Ron Hildreth, Alta, Iowa

>Keith,

I bought a bunch of red oak that had the red streaks in it, knowing that after it was exposed to the light for a while, would turn to a dark brown, as Bruce describes. I specifically wanted this to use for our cabinet doors, to add a little "Bling Bling" as the kids these days say. They look great in our eyes, and we continue to get lots of compliments on them. Beauty is in the eye of the beholder!

Ron in Iowa