Life is rough..
JL
>..ing out spindles.
Knowledge You Can Build On — Est. 1998
Life is rough..
JL
>..ing out spindles.
Well, well, I've never seen . . .
SteveM
>one of those horses / benches in use before ! Now I see the light ! Thank you for the pic. Could never figure out how they work from the pic in cataloges. Learned something today. OOPS !
Re: Life is rough..
JohnKJordan in East TN
>JL,
A friend and I have been planning to make a couple of these so I've been saving pictures out of books, etc. Did you make this or purchase, and either way, could you provide a few dimensions and/or a couple of additional photos?
JKJ
Re: Life is rough..
Norb - Cumming, GA
>JL
How do you like your horse? I'm just roughing mine in - same Boggs style as you, but see you have made some modifications. Any suggestions or pitfalls you can help me avoid?? Once mine is done, I'll be on to green wood hunting....
Thanks,
Norb
Re: Made it....
JL
>email me and I'll send you some pictures.
Re: Some nice tight grained wood..
JL
>for the post.
Check the angles for the chock block and the post and make sure that they fit snug.
I use a rug to cover the sliding seat. You definitely want something after an hour or two...
Re:Sharing with all....
Mike Hamilton
>wouldn't be wasting bandwidth.
Enquiring minds, etc...
Mike Hamilton
Plainfield, IN
Re: Life is rough..
Ray Binnicker
>For those asking about plans/pictures, etc, for a shaving horse you can find some plans at: countryworkshops.org. They are located a short distance from Ashville, NC.
No affiliation, just a satisified customer.
Ray Binnicker
Re: The guy who designed them...
JL
>built the ones at John C. Campbell Folk School. I shamelessly copied mine from the ones sitting on the shaving porch.