Sorry I'm a bit late with this month's "Ides" question, but it's not too late. I am going to go back to the beginning with this one:
How did you get started in woodworking (turning, hand tools, etc.)?
As usual, we will harvest your responses, boil them down to their barest essence, and send them off to Woodworker West magazine for our next bimonthly "News & Views" column.
>Via construction carpentry. My stepfather was a master carpenter (construction type) and got me started when I was young. First we built an addition to the house (child labor!). When I was old enough, I worked construction in the summer.
>I've been woodworking since I was about 10 years old. I started out with simple projects with my Father and later learned through Junior High and High School Shop, then didn't do much until after I was married and we had our children. Woodworking became a way we could get the furniture we needed while also aquiring tools on a limited budget. My first tool purchase was a B&D jig saw and Craftsman router. These were used to build a sewing cabinet for my wife. I the jigsaw died a few years ago but I still have the router use it in some projects.
Perhaps woodworking is in my genes as my grandfather, as one of his many skills, was a skilled carpenter and my father was a self taught cabinet maker. My woodworking is mostly for family, but I also do some commission work.
>My interest started first from carpentry. After having paid one more carpenter for not very good work, I decided that I was done with hiring people to do work around my home for which I could do a better job. My first big carpentry project was to finish my basement. I spent a year doing that in my spare time. After I was done with the basement, I was bored and needed something new to challenge me. A friend on mine from work (Yes, that's you Harvey Meyer!!!) showed me some furniture he had made and that was what inspired me. My first piece of furniture was a small step stool for my young son. Then it was a blanket chest from plans I got on the internet. After the blanket chest, which I think I did an amazing job with for a first significant project, I was hooked.
As a young married couple with a realitively new first home, my wife and I had all kinds of need. Needs for mostly cosmetic home improvements,a need for furniture, and a need not to spend too much money.
While not as popular as they are today, 17 years ago we found ourselves watching all the "How To" programming on Saturday mornings that we could find. Lynette Jennings sort of an early Canadian Martha Stewart decorating show, This Old House, NYW with Norm,Sewing shows, anything related to how to.
I started to catch myself saying and thinking "I could do that, that doesn't look so hard, if I had the right tools I could try that".
So I started to get some tools, buying this and that , Christmas presents and eventually started making small furniture projects for the house. Some end tables, a mirror frame, blanket rack,shelves, TV stand.
Watching people do things on the TV including but not limited to Norm seemed to inspire me, and provide just enough confidence to give it a try.
After that I got hooked.
Plato had it right......"Necessity is the Mother of Invention"
>"Mom, I get to take wood shop this year!" [age 11]
"Well, that's convenient, because I need a lidded filing box that I can have at my desk, but still put in my car and take with me when needed. Do you think you could make me something like that?"
"Gee, I could try, Mom. How big would it have to be?"
"Oh, about big enough for a cat's coffin."
Mom passed away at 83 in '94. Now the Cat's Coffin sits next to my desk.
Around 10 years of age or so (early '50's), my father bought me a jigsaw (Sears, I think). I made a "Home-Sweet-Home" sign that, amazingly, I still have. Then, in high school, I took two years of wood (and metal) shop and liked it - although the teacher (being very wise) knew better than to let me near the real power tools. Fast forward 35+ years during which I did a lot of handyman/repair type stuff around the house, but never anything serious, although I really enjoyed working with my hands and learning stuff. Upon retirement 12 years ago, I needed a "program" as my wife puts it. I remembered back to those high school years and how much I had enjoyed making something out of wood that I could say - "I did that" - and decided to pursue woodworking at a hobby level. Plus, following retirement, we were starting to do a lot of home-improvement type stuff, so woodworking seemed to fit in. Stumbled upon Badger Pond (and later WoodCentral) and the rest is history.
>Started back around 7th grade shop. Dad collected tools but never used them much. Sorry to say I've collected lots of tools and have put them to limited use. Like father like son I guess. Once the lower back gets taken care of, I hope to get back in the shop a lot more frequently, especially since my 10 yr old is showing some interest.
>I was raised on a farm and therefore learned to be "handy", however limited to carpentry (on the wood side).
Later on one of my classmates in high school had customized a van (as was popular in the late '70s), and that gave me the desire to get into woodworking. It took another dozen years, until I got out of school, to get to start acquiring tools and equipment, quest that is still ongoing :-)
Other than books, my first exposure to WW was through Norm, Scott Phillips and Roy Underhill on TV.
Now it's more a quest for knowledge, and time to put it in practice...
>First home (w/basement) + New Yankee Workshop + Gift Certificate from Home Depot = New Hobby
I guess this would also be a good opportunity to thank Norm Abram and all you good folks here at WC for teaching me about woodworking tools, techniques and (above all) safety, before I actually made the commitment to jump into this somewhat expensive but rewarding activity. I'm still a beginner but my skills are improving with every new project and my knowledge is expanding with every visit to WoodCentral.
>I've always been somewhat interested in woodworking since shop class in high school, but marrying a girl over twenty-five years ago who was the proud owner of a house that was nearly falling down put me on the road to some serious saw dust making. I've loved every minute of it!
>I took a couple of years of woodworking in high school and discovered a love of the smell of fresh cut wood. I did nothing about it until the grandkids started and then started building cradles, rocking horses, kiddy cars, etc for them. I've deviated into flat work but have always returned to my first love, that of making toys for kids.
Gerry, with 8 grandkids and now 2, count 'em, great grandkids.
>I built a spare bedroom that involved the creation of a hallway. I didn't want a tunnel, so we decided to build an alcove for a Deacon's bench. But we couldn't find a bench we liked. Then we saw the plans for one we did and the now infamous words fell out of my mouth - "I'll build it. I just need a saw and a router!"
We still have the bench - that saw and router are long gone but their multiple cousins are alive and well in my shop.
>Guess my pursuit of woodworking kind of evolved - First my father passed away when I was 10. This, and the fact my mother & I had very limited funds caused me to do many repairs, including installing sliding doors on a sink cabinet. I made all the replacement window screens for our house using my fathers hand tools. My Aunt & Uncle retired from the steel mills and built a house next to us. He gave me a Craftsman scroll saw with a large assortment of patterns. My BIL brought in a large supply of cutoff 1/4" birch plywood from a cabinet shop - I made several yard ornament project pieces for his Cub Scout troop to complete and paint. I used the saw to make many Christmas gifts. In HS I took wood shop and built an Eastern red cedar bookcase, currently in my Son's house. I built a new house, then divorced, later remarried and remodeled my current home, but some furnishings and rebuilt others. I am now retired and have a very comfortable, fairly well equipped workshop.
>I always had an interest in woodworking. Made my own crude "pillow furniture" back in the 1970's, did some odds and ends projects in the early 1980's. In 1988, my wife was looking at some unfinished units for the bedroom. I looked at the quality and said "I can build decent stuff and the materials and tools will be less than this stuff", and I got my first real table saw and router. Never built that stuff, but built a lot of other things.
>I had always built stuff since I was a little kid, but I really got into woodworking back when I had a small sailboat that had typical '70s "clorox bottle" interior. I lined the ceilings (side of the hull) above the berths with 2" stips of teak, built a small galley, a bridge deck, compartment covers, and all sorts of other stuff to warm it up and make it livable for me for a year and a half sail I was planning to make by myself. Turns out all that work was very good for building my skills. Nothing is square or level in a sailboat and careful measurement and scribing was necessary for the changes to be successful. I built the entire galley component out of the boat, following very detailed measurements I had made, and istalled it after it was all together, and surprise, surprise, it fit like a glove.
After coming back from my sailing voyage, I went back to school at the School of Fine Arts at the University fo South Florida. While in school, I took a job at USF's "Art Shop," which had a very large and well equipped woodshop, where i worked for three years. I had charge of maintaining all the small power handtools and teaching correct usage and safety to students. While working I had access to large stationary machines which I used on various project to hone my woodworking skills. I learned to use a RAS, large cabinet saw, badsaws, industrial jointers and planers, etc. While learning tools I also started to get an appreciation for all sorts of different woods and their different qualities.
With all this behind me, when I finally bought a home and eventually built a woodshop, I was in a good position to outfit it adequately without making too many purchase mistakes and once installed it did not take long to get back to speed on actually building stuff.
>Wow, how far back does it really go. I'd have to say it was my father's workshop where it started. He was no woodworker but he had some old tools and these facinated me. Growing up in the late 50's and early 60's, houses were going up all around us and I loved watching the work. My first attempts at working with wood were miserable failures. I didn't let this deter me and kept on trying. Gradually I gained skills. I'd have to say that my first success was in high school. Dad was building a house and the deck off the living room was planked with fir. The clear grain facinated me so I took some scrap and made a frame for a mirror in what is probably an Americana farmhouse style. I managed to make a stepped top using a Skil saw. Everybody was surprised and I must have heard "Where did you learn to do that?" a hundred times. I kept at it after I got married using my own tools until I got an idea that needed a router. My best friend had one and agreed to let me try it out. It was faitly intuitive and I managed to make a pair of coat racks with a fold down door revealing a storage space in kind of a non-descript modern style. After I saw what new tools could do, I was off to the races. Now I am attempting to master the Mission and Arts and Crafts styles of funtiture with oak ash and maple. Funny thing, there always seems to be one more tool I can't live without.
>It's a long path. My mom's dad owned an Archery and Fishing shop. He built long bows, arrows and bamboo fishing rods. My dad was a carpenter in days when union carpenters still framed houses (oh but to be able to use a framing square like he cloud in his prime). Dad finished his working career in the cabinet shop of a large hospital. My favorite "toy" at 3 or 4 was a hammer and bib overalls mom sewed nail puoches and a hammer loop on, just like dad's. Wood was just always a part of my life and still is. My first real project was a series of Soap Box Derby cars starting at 12 I even made it through the quarter finals one year. I wanted to have what worked for me not what was available for purchase, so I just build things. However purchasing these things would usually get them for me years sooner. The public broadcast wood shows all played a part in my learning too.
>I'm a product of shop classes in both jr high and high school. The school district in Santa Barbara CA had a great idea everybody in 7th grade took a semester of various shop classes(printing, drafting , woodshop and electrical) and a semester split between cooking and sewing classes.
For high school my family moved to NJ quit a shock from CA the first day of shop class there was one girl in the class and the teacher went on a rant about how he didn't like girls in his class, what a bozo this was also about 1978. I took three years of shop class there and what I took out of it was an enjoyment of woodworking that started me on my way. I wish the teacher had taken the time to introduce us to local woodworkers that could have been very interesting and some well known ones lived in the area.
>I learned at my father's side. When I was ten years old, my three brothers and Dad and I built 12 rowboats (they were 12 feet long) and donated them to our church camp on Lake
Retreat, Washington.
That project was followed up with building both masts and booms out of Sitka Spruce for our 36" steel hulled ketch "Blue Lady" in Seattle. The interior of the boat was completely rebuilt featuring mahoghany built in cabinets and counter-top.
>My maternal grandfather died when I was seven. The summer before he died, we all gathered at his house. He was a farmer and built barns and fences out of necessity. More than fifty years later the barns are still there. That summer, someone had brought a ball and glove, but no bat. We wanted to play baseball. My grandfather went to his shop and with a drawknife and rasps made us a bat in about 30 minutes. It was pretty crude, but It was magic. Now I have the magic.
>In a way, I feel I've always been involved in woodworking. My Dad was a carpenter most of his life, and as a kid I enjoyed working on stuff with him. So I guess I came by it naturally!
After I grew up and got married, I got back into working wood when we bought our first house. Home repairs have been the consistent thread weaving through my woodworking. I have built some furniture, and now dabble more in turning, but still home repairs and remodeling are the things that justify the tools and the investment in time.
>I can remember when I was a freshman in college sitting in a room of friends talking about tree-houses. I could remember counting them up, and getting the same number as my age, which would be about 18 I guess.
Some of them were pretty neat, with bridges between platforms in different trees. One was in a leaning, walk-up tree out over a creek. Another was up a big sycamore, with a cable that ran out about 60 - 70 feet, with a pulley that we would ride down, and hit the ground running. I got to witness one young friend discover his acrophobia, as he looked down, and locked up, incapable of going up, or coming down. He just froze up and cried for mommy. Ha
Dad had been a carpenter in his early years, but had a hardware store by the time I came along. He really got mad when I borrowed his hand-saws and hammer without telling him. It didn't take long, before I had to have my own tools.
I still have some of the tools that I bought from my Dad's store in the mid sixties. I spent so much time in trees as a kid, that I was almost grown before I could stand fully erect, and walk without my knuckles dragging. Ha
I would guess that almost anyone would think I am kidding when I tell them that the term for reverse evolution is dysgenic, and that I am one of the first of our species to return to climbing a tree to go to bed each night, but I have been doing that for over 20 years. I don't recall if there is a photo of it on my website or not, it is www.treetales.com. If not, and anyone wants to see myt stairs, let me know, and I will take some shots and post them.
It is almost mid-night and time to make the climb. K
>When I was a kid, if you wanted it, one way, and maybe the only way, to get it was to build it. Scrounged wood from all over town. Never stopped, but am able to buy a few more things now adays, and good thing too since my hobby is woodworking.