Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Ridgid Products: Decent Quality?

Posts

Ridgid Products: Decent Quality?

#1

Ridgid Products: Decent Quality?

A.W. Ford, of Newberg, OR

>I have been looking around so I could pick up a table saw finally. For the most part I had been looking at the tables for around $1000. Then while browsing around the borg cube-ship I found the Ridgid TS3650 for $549. Went home read the reviews and couldn't find anything bad said about it, most people rated them comparable to what I had been previously considering, so I bought the thing. 300 lbs of cast iron and 12 hours of assembly later everything appears to be rock-solid to my novice eyes, and my initial "playing" with it has been nice, east to use, and no complaints. They appear to have a number of the larger power tools, all quite a bit cheaper than apparently equitable equipment from other makers. I've read a lot of the reviews of their other tools and everyone seems to be impressed with the quality versus the price.

Anyone else here have any experience with Ridgid products? I'm seriously considering using the money I saved on my table saw to turn around and pick up a joiner/planer and a band saw, but prior to running across this TS I'd never heard them among the recommended brands. Thoughts?

TIA

Re: Ridgid Products: Decent Quality?

#2

Re: Ridgid Products: Decent Quality?

Ron Hildreth, Alta, Iowa

>A.W.,

One thing not previously mentioned to you here on WC about table saws is something I learned the hard way. If the blade is direct-driven by the motor (no belts), the quality of your cuts are not going to be as good. This is due to vibration. I'm not familiar with the Ridgid brand, whether it's blade is belt driven or direct drive, but now you know what to look for. Generally, the heavier the saw, the better the quality of cut.

Ron in Iowa

Re: Ridgid Products: Decent Quality?

#3

Re: Ridgid Products: Decent Quality?

Barry Irby

>Not sure it has anything to do with anything, but maybe somebody will remind me of what I heard about home Depot and Rigid. HD bought a major interest in Ridgid (I think?), not sure. Also, Sears/Kmart sold their designs to Ridgid? I think Emerson makes them or used to. My 40 year old RAS is a Craftsman/Emerson.

I have heard that Ridgid offers a lifetime warranty on their rechargeable battery powered tools. Be very careful if you buy them and be sure you get the warranty. Many of these batteries are good for about 500 cycles if you are lucky. That's about two or three years. The batteries cost almost as much as the tools. So get the tools and the warranty. I no Ridgid tools and no relationship with HD.

Re: Ridgid Products: Decent Quality?

#4

Got lucky...

A.W. Ford, of Newberg, OR

>Thanks, very good to know. The Rigid is belt driven, so I guess I got lucky, eh?

Re: Ridgid Products: Decent Quality?

#5

Re: Ridgid Products: Decent Quality?

Denis Ch�nard, Orl�ans, Ont.

>Ridgid tools = decent quality, not necessarily the best, but not a bad purchase either.

In the case of the 3650, this is a very good buy. Same for their bandsaw and oscillating spindle/belt sander.

Make sure that you purchase the tools when they're on the lifetime warranty protection promotion...

DC

Re: Ridgid Products: Decent Quality?

#6

Re: Got lucky...

Ron Hildreth, Alta, Iowa

>A.W.,

Yup, Sounds like ya got a good one!

Now, a little help on future tool purchases-

When you know you've bought a tool that you like, you pull out the key board, pull up the chair, stick out your chest, and announce here on WC what you just bought. That's called a "tool Gloat". We all do it!

But if ya want to get sneaky, you work it into the body of the message, carefully camouflaging it so no one knows you're doing it. That's called a stealth gloat-- and we ALL do it to some degree!

Have fun with your new table saw and don't forget to let us know how it's working for you.

Ron in Iowa

Re: Ridgid Products: Decent Quality?

#7

Re: Ridgid Products: Decent Quality?

A.W. Ford, of Newberg, OR

>I wouldn't be surprised if you're right about Ridgid and Home Depot. Ridgid was the only brand they carried for quite a few tools like the TS, joiner, bandsaw, shop vac, etc. At least at our local store. Yep in fact I just checked the Ridgid site and for distributors they only have Home Depot listed, so that about sums it up...

So far as quality goes, on the other hand, if their stuff is anywhere as good as what I'm reading on all the reviews I have to say this TS may not be the last of their products I pick up

Re: Ridgid Products: Decent Quality?

#8

Re: Got lucky...

A.W. Ford, of Newberg, OR

>Absolutely! My only concern would be gloating over getting a goat when I thought it was a thorougbred :)

I have no real frame of reference to compare it to, but I'll definitely let ya know the likes and dislikes once she's well broken in.

Re: Ridgid Products: Decent Quality?

#9

Re: Ridgid Products: Decent Quality?

Dave's Not Here

>OK, first of all Home Depot owns absolutely no part of Ridgid. Never has and I doubt if it ever will.

Ridgid does not have a lifetime warranty. What they do have is a 3 Year Warranty against mfg. defects AND a Limited Lifetime Service Agreement. The LLSA, which you must sign up for and is free, cover all Ridgid tools that are made by TTI which includes all the woodworking tools and cordless and corded non plumbing tools. The LLSA will cover the cost of fixing any tool that breaks for as long as you live. It also covers the free replacement of any tool battery that will no longer hold a charge, again for as long as you live.

As far as bang for the buck goes, almost any Ridgid tool will be worth what you pay for it and in some cases worth even more than you pay for. The possible exception is their band saw. It requires so much tweaking after you set it up for it to run properly that by the time you're done buying after market accessories to make it right you have spent more than you would have if you'd bought a better band saw to begin with.

I have a number of Ridgid tools and can honestly say that every one of them has been trouble free and performs well.

Re: Ridgid Products: Decent Quality?

#10

Happy with all of mine.

Bri in Mtl

>Jointer, planer, circular saw, ROS, oscillating sander.

Would buy them all again.

Re: Ridgid Products: Decent Quality?

#11

Decent but...

Rob Sandow

>These things have almost no resale value. There are 2 main reasons for this. First, Home Depot sells gazillions of these to wannabe woodworkers who subsequently lose interest and the saw winds up in the classifieds alongside dozens of others like it. Second, this saw is almost identical to the saw that Sears used to sell under the Craftsman name up until Sears ended their OEM relationship with Emerson Electric, adding dozens more nearly identical used saws for sale on the cheap. I'm not sure about the details of the trademark and licensing agreements, but when Sears ended the business relationship, Emerson started making the exact same tools for Home Depot and selling them under the Ridgid name. This enabled Home Depot to go with a lower cost supplier attached to a brand name known for quality with its plumbing tools, and scale back its reliance on Delta.

As for the quality of the saw itself, I once owned the Craftsman predecessor, and with some careful setup, these can be very good saws. The best thing you can do is replace the fence. The one it comes with has a tendency to be able to be locked down out of square with the table. Several aftermarket fences are available to remedy this problem. If the saw came with cast pulleys and a solid belt, vibration can be reduced by replacing them with machined pulleys and a link belt. You can also replace the right wing with a melamine or formica table board for additional capacity, as well as add an outfeed table. A high end carbide blade with a thin kerf and a stabilizer will help with ripping thick stock as the motor is somewhat underpowered. You probably also want a dust collection shroud that fits underneath the saw. Adjust blade parallel to the miter slots. It probably won't be perfect out of the box. This is easier said than done. As I recall the trunions are bolted to the bottom of the table with 6 bolts that are mostly impossible to reach. By the time I was done, I had easily spent $1000 on my saw, but the quality of cut rivaled what I now get with my PM66.

Hope this helps.

Rob

Re: Ridgid Products: Decent Quality?

#12

Ridgid/Sears

JKJ in East TN

>>...this saw is almost identical to the saw that Sears

>used to sell under the Craftsman name up until Sears

>ended their OEM relationship with Emerson Electric...

Same with the Ridgid lathe sold at Home Depot - it's nearly identical to the old single-tube Sears lathe. It's OK for a cheap lathe.

JKJ

Re: Ridgid Products: Decent Quality?

#13

Re: Happy with my TP1300

Glenn Madsen near San Francisco

>planer. Bought a Delta, and before I opened the box, I had second thoughts, and took it back for the better one. That was 6 or so years ago...

Re: Ridgid Products: Decent Quality?

#14

ridged jointer

del schisler

>I have the 6" jointer It is right on Out of the box Just had to set the fence to the degree's That was it Cuts very smooth I use a dust collector on it Also have the osc.belt sander and drum It is a combo It to is very good And also the 6" round pad hook and loop sander That works very well I also have the 13" planer That work's better than expected No snip at all I dont know about the band saw I have the delta 14" with high rizer Now that is a band saw or at least it works for me Resaw ect. On your saw now if you get the loop belt you will notice a change in the way it sounds and works And get a good blade I use the dewalt 35-7657 It is a very good blade Works for me del

Re: Ridgid Products: Decent Quality?

#15

Link Belt Won't Work

Dave's Not Here

>If by loop belt you mean link belt then there is no reason to install one of those. Actually, you couldn't install one if you wanted too. The Ridgid 3650 uses a serpentine belt instead of a V-belt so the only way a link belt will work on the 3650 is if you change out the pulleys.

Re: Ridgid Products: Decent Quality?

#16

Re: Ridgid/Sears Not Identical

Dave's Not Here

>Sorry but the Craftsman lathe is nothing like the Ridgid lathe because Ridgid doesn't offer a lathe. It was discontinued years ago.

Re: Ridgid Products: Decent Quality?

#17

Re: Ridgid Products: Decent Quality?

A.W. Ford, of Newberg, OR

>Thanks for the great feedback, everyone. My only complaint up to this point is I had to pull off both rails and realign them twice. Had followed the manufacturer's assembly instructions and found the measurement guides on the front rail was a little over 1/8" off: figured I had screwed up so reset it again based on the assembly instructions and it was still off, so the third time I squared and measured from the kerf marks I made and got it spot on. I know I shouldn't rely too much on those measuring guides for precision but it is nice to set the fence at least close to what I need and then use the micro-adjustment knob to dial it in the rest the way. Works like a champ now :)

Re: Ridgid Products: Decent Quality?

#18

Re: Ridgid Products: Decent Quality?

knotscott

>The 3650 is a solid contractor saw. It's essentially the most recent iteration of the King-Seely/Emerson/Ryobi made saw that was once made for Craftsman, and now Ridgid. Ridgid is owned by Emerson and was made by them up until about 4 years ago when the Ryobi parent company took over manufacturing the Ridgid TS for Emerson...the Ridgid name is still owned by Emerson, but there's a close relationship with HD.

Their jointer and planer are pretty well thought of for the money too, but the 14" BS gets more mixed reviews. I'd look at a Grizzly, Rikon, or Rikon-made Craftsman in that case.

Get yourself a good blade or two for that new saw, and use the stock blade for junk wood. A high quality thin kerf general purpose/combo blade will do wonders and will spare your motor too...Forrest WWII 30T or 40T, Infinity Combomax Lite 50T, Ridge Carbide TS2000 40T, Freud LU86 40T, Freud LU88 60T, DeWalt DW7150PT 50T to name a few. And add a decent 24T rip blade to chomp through the thickest material with ease.

Re: Ridgid Products: Decent Quality?

#19

Re: Ridgid Products: Decent Quality?

Jay St. Peter - Southern, MD

>I have had one of their planers for 7 or 8 years now. It's been good. I had to replace a couple parts recently which I ordered from ridgidparts.com and got them very quickly. The site is pretty complete and it seems like everything is in stock.

Their jointer is very nice for a 6" and IMO comparable to some of the more expensive models from Jet/Delta.

I had one of the Ridgid fences as an upgrade to my old table saw. It was OK, but not as good as some of the t-square fences out there. It's not too difficult to knock it out of alignment. I'm not sure if their newer saws have a different design or not. I found that there were two ways to get it out of adjustment. A hard knock will do it, but with care you can usually prevent that. You can also lock it out of alignment if you aren't careful. Because it locks in the front and rear, the thing won't necessarily self align when you push the lever down. To avoid this, push the front in before locking to get it aligned first. Realignment is a tedious process. I eventually stripped the bolts used for alignment, but Ridgid sent replacements for free. Neither a US or metric allen wrench exactly fit the bolt heads and I believe they were aluminum. Too loose tolerance for how much force they need to be tightened to prevent alignment issues.

I recently got a small wall mounted shop vac for the garage (not my shop). After a few months (and very few uses), it stopped working. I sent back the power head and they sent me an entirely new vac as well as a spare filter. Now I have some extra vac tools and hoses to use in the shop. The switch on this one feels better than the other, so I expect it to work long term.

Bottom line is that I think Ridgid is a good brand and would buy tools from them again. However, I wouldn't buy every tool from any vendor. There is a sweet spot in performance/cost that I look for, so my shop is multi-colored.

Jay

Jay

Re: Ridgid Products: Decent Quality?

#20

Ridgid wood lathe, model WL1200 *LINK*

JKJ in East TN

>>Sorry but the Craftsman lathe is nothing like the

>Ridgid lathe because Ridgid doesn't offer a lathe.

>It was discontinued years ago.

Hmm, I see it today in the Ridgid on-line catalog as model WL1200, Cat#14773. (link below) Perhaps this is an old catalog but it does have an '07 copyright date.

I bought one a few years ago from Home Depot to do a quick project. It seemed to be nearly identical to what I remember of the one Sears sold.

BTW, the lathe was cheap but worked fine. I used it for a short time then gave it away and bought a good variable speed Jet lathe. In retrospect I should have kept the stand which was fairly sturdy.

JKJ


http://www.ridgid.com/Tools/WL1200-Wood-Lathe/EN/

Re: Ridgid Products: Decent Quality?

#21

Re: Ridgid Products: Decent Quality?

Larry Clinton

>I have a Ridgid 14.4V impact driver and the 12V Drill. I finally did get notification that they were now registered for the lifetime service agreement - not throwing away any more cordless tools due to bad batteries! Both seem to be at least as good in quality as my 12V Dewalt and tailed Porter Cable & Makita. However, I have a Dewalt CMS, and looked at the Ridgid CMS at HD, didn't think it was of nearly as good quality. When shopping tools, I find it pays to investigate well, WC is a good place to start, although most people have a bias for the brand they own, most of us do research before buying, and have a basis other than ownership for the bias. I also believe almost all the woodworkers (if not all) on this site are very honest. If any have a problem with their tool they will tell you. In general, almost all Grizzly, Jet, Powermatic, and older Delta tools are good quality - The prices vary - as do the features. I do a lot of shopping before I purchase expensive tools, but at my age I only want to buy one of any tool for the rest of my life!

Re: Ridgid Products: Decent Quality?

#22

Re: Ridgid wood lathe, model WL1200

Dave's Not Here

>The page your link took me to is a page that lists and shows Ridgid tools that are no longer in production. Some HD's may well have a few left on their shelves but they are not current models.