Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

OT .. Need advice on weed eater technology..

Posts

OT .. Need advice on weed eater technology..

#1

OT .. Need advice on weed eater technology..

Jim Rahbe, Bedford, TX

>Hi all,

I�m looking to buy a new gas powered weed eater (string trimmer). The one I have now has a dual string auto feed device at the bottom. Tap it on the ground and it advances the string. The one I�m looking at has a spool where you just insert two, roughly ten inch, pieces of line. I really like the idea of not having to wind the string in the auto feeder, but I fear I�ll have to constantly stop and stick in a new piece of line. If I currently tap my auto-feeder every 25 feet or so, to advance the string, does this mean I�ll have to add a new piece of string every 25 feet, if I buy a unit with the individual strings?

If you have one of these individual string units, please let me know if you are happy with it.

Thanks,

Jim R.

Re: OT .. Need advice on weed eater technology..

#2

Re: OT .. Need advice on weed eater technology..

Joseph Mulherin

>Jim, I had the head for the weed eater you mentioned...DO NOT buy it...it breaks off as soon as it starts to touch something. I was constantly refitting the new pieces into the head and then they broke off again and again. I finally put the original head back on and double string the cord as before. Just think it is a faulty product...in my humble opinion.

Re: OT .. Need advice on weed eater technology..

#3

Re: OT .. Need advice on weed eater technology..

Ron Hildreth, Alta, Iowa

>Jim,

I bought one of the "Weed Warrior" double string heads that updated my old "tap to advance" trimmer head. The new individual strings are of a heavier gauge than the original, which means I can get more feet per string change than I used to. Of coarse, if I get too aggressive, any string I install won't last long!

BTW- "Weed Warrior" also makes an upgrade head that utilizes three sharp plastic blades. Does a good job of removing anything you want it to, and things you don't- like toes! IMHO it's a little dangerous!

Ron in Iowa

Re: OT .. Need advice on weed eater technology..

#4

Faulty is right- send it back!

Ron Hildreth, Alta, Iowa

>

Re: OT .. Need advice on weed eater technology..

#5

Re: OT .. Need advice on weed eater technology..

Thomas S Stockton

>The heavier strings are nice. I give the sam advice for string trimmers as I do for chainsaws buy from a local dealer who also services them, they will usually answer your questions about how well the different heads work. Some of that type of head uses some really gnarly looking line that looks like it would work real well.

Re: OT .. Need advice on weed eater technology..

#6

Re: OT .. Need advice on weed eater technology..

Matt Robinette,Mt Juliet TN

>You may want to look at Shindaiwa. My trimmer has a head you line up the holes push the line thru and then twist the head to fill it. The head doesn't need to be taken apart. Works great.

Re: OT .. Need advice on weed eater technology..

#7

Re: OT .. Need advice on weed eater technology..

Norman (Ottawa, Ont.)

>I've been through a couple of weed eaters here, we have a few acres.

My most recent weed eater is a Honda 4 cycle.. I got tire of mixing gas and oil, it's also quieter and works great.

What I want to mention is that the head is the type where you wind 20 or do feet of line around , pop it through two rivet holes and go. It is tap and go but this particular head (standard with Honda) handles .105 line , which is fairly thick and therefore much longer lasting between taps.

Not many of the other heads handle this thickness of line, something to consider.

I wnnt the other way, my previous wed eater had the other head which needed to have short line lengths inserted every time.. What a pain!

I much prefer this type, just tap and go..

Norman

Re: OT .. Need advice on weed eater technology..

#8

Look at the Stihl line.......

Scott in Eastern Iowa

>......specifically the FS 55....or others if your budget allows.

Bought the 55, love it, tis a pleasure to use.

No affiliation....purely a satisfied Stihl consumer.

Re: OT .. Need advice on weed eater technology..

#9

Re: OT .. Need advice on weed eater technology..

Phil Joines Krum, Tx

>I have an Echo with the commercial cut line head. It uses .155 line and lasts a long time cutting Johnson grass and Giant Ragweed on our fence lines and the 400' of creek (about 4000' of trimming total). They do break fast if you get them into a welded wire fence. I've been thinking of building one with a 4' chainsaw bar and gas engine to pull with the riding mower.

Re: OT .. Need advice on weed eater technology..

#10

Re: OT .. Need advice on weed eater technology..

r payne

>I agree, look at the four cycle engines with the heads that are the quick fill style. The 4 cycle engines are more powerful, a bit quieter, less pollution and no heavier (lighter than some). If you have need for heavier cutting or other work, look at the quick change tools (brush cutters {think circular saw blade}, cultivators, even snow blower attachments).

ron

Re: OT .. Need advice on weed eater technology..

#11

Re: OT .. Need advice on weed eater technology..

del schisler

>you will have to add all the time Remember how many time's you tap the spool The same the line doesn't last any longer I wouldn't have 1 of those del

Re: OT .. Need advice on weed eater technology..

#12

Thanks for the input....

Jim Rahbe, Bedford, TX

>I think I'll see if I can find one of those Twist to fill heads..

Jim R.