Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Alder?

Posts

Alder?

#1

JL

Alder?

JL

>The special of the next couple of months at the lumber supplier that I usually deal with is Alder. They have the 18 mm A-C plywood going for $60+ and "superior" grade going for under $2.00/board foot.

I haven't worked any Alder. Why is it graded differently? I'm used to FAS. Should I consider buying some?

Re: Alder?

#2

Re: Alder? *LINK*

Mike Baker

>Alder is a wood that either you like it or you dont.

Some dont think it worty as a finish or harwood.

I love it, and in Colorado it has become quite popular.

Here are some pics of a couple different project of min in wich Alder was used.

The Family room was remodeled Fireplace, stone, harwood floors and I used Alder for the fireplce surround and cabinets.

The dresser is Alder also.

Dresser is stained.

Family room is Natural fininsh.


http://i137.photobucket.com/albums/q211/Moosegooser/P1010210.jpg

Re: Alder?

#4

Re: Alder?

Mike Baker

>I like the way Alder looks and its workability.

The Select grade in lumber will be no knots. the construction grade will have knots.

Knotty Alder projects are quite popular in Colorado.

I will post some of My current projects below.

Re: Alder?

#5

Re: Alder?

Mike Baker

>http://i137.photobucket.com/albums/q211/Moosegooser/Alderfinished.jpg

Re: Alder?

#8

Re: Alder?

David C. Lykins - guitardude - Dallas GA

>Hi JL, Alder has been used for electric guitar bodies for many, many years, but I'm guessing you NOT going to build an electric guitar. It usually doesn't have any wild figured grain pattern, but I find it very easy and comfortable to work with. I've also never had any problems with glueups, however I did have a guitar body dry out more than I expected and got a couple of small cracks in some 8/4 Alder. Besides that its been great to work with.

I dont know if you turn any, but it's good for turning peices also.

I would rate the ease of cutting and shaping up there with mahogany or similar wood. If you stain it, most likely a darker stain always seems to be more appealing on Alder.

Re: Alder?

#9

Re: Alder?

Dave Winters

>Yeah, I'm up in Steamboat Springs CO and I run a millworks shop. We run 95% Knotty Alder! On a new job sometimes I forget to ask what species is spec'd, as it's a given it's KA. We insist on what's called Premium Frame grade. Less open knots. Clear (Select) Alder is becoming very hard to find...

Re: Alder?

#10

Re: Alder?

George@Colonel's Workshop-Havertown PA

>Good Morning JL,

I finished a couple bar stools made from Alder for my #1 son. I thought it dented very easily. I also felt there was a little learning curve to staining it: it came out darker then I had anticipated, with splotchiness. No big deal with the finishing part of it. Its "dentability" bothered me. Maybe somebody else can address that aspect.

George

Re: Alder?

#11

Re: Alder?

Denis Ch�nard, Orl�ans, Ont.

>Well Colonel, the behavior you saw with alder is exactly in line with its reputation. It's the softest member of the birch family, and the denting and blotching you experienced is par for the species.

DC

Re: Alder?

#12

Same here George

Tim Greif - West of Chicago

>I have a kitchen table made of Alder. It's a butcher block glue-up with alot of different wood grains. I sorta like the look but when I applied a golden oak stain, it colored just as dark as oak with a fruitwood stain. Really surprised me.

It's very soft. Most hardness tables show it as about the same as poplar, even softer than douglas fir. With my kids using it as both a dining table and homework table for the last 18 years, it has shall we say, alot of character marks. It's used alot in pool table structural frames due to it being pretty inexpensive. Since my kids are now all out of the nest as of this year, I may have it sanded flat and refinish it to get rid of some of the divots and ball point pen trails. Then again, those marks have alot of memories.

Re: Alder?

#13

Re: Alder? *LINK*

Robin Corell, in Atascadero CA

>I worked at a shop where we used red alder for wear strips and handles on pattern core boxes because it is a bit tougher then poplar. we didn't use it anywhere elss because it is not as stable as poplar.

A few months ago I visited the California Heritage Museum in Santa Monica where they have an exhibit of Monterey Mission furniture. Montery Mission is the name given to a line of furniture made by Masson Mfg. The furniture was made from alder and then distressed and stained dark or painted and glazed. The show is up through October and they have put togeter a great book.


http://www.californiaheritagemuseum.org/exhibits.php

Re: Alder?

#14

Alder: rather soft, works easy, looks OK

Paul Dwight

>Alder seems to be a popular cabinet wood in the western states, maybe because native alder stands in the northwest are much closer to us than are the eastern hardwoods. From a hobbyist's perspective, alder has a couple of advantages: (1) it's not very expensive; (2) it works easily; (3) with careful finishing, it can be attractive. It can make a decent fake cherry, if that kind of thing interests you.

Disadvantages: (1) It's soft and dents easily. Much softer than cherry, for example. (2) From what I've seen in our local supplies here in Phoenix, long lengths of clear wide stock do not exist. A 6" wide board 8' long will usually have a couple of knots. (3) As George noted earlier, it is prone to splotching. Pre-stain conditioners work pretty well to control splotching. (4) I've never seen figured alder -- no curly alder, no spalted alder, no nothing. Maybe it's out there, but none of my local suppliers has it.

I use a fair amount of alder as a secondary wood -- for the back of a cherry cabinet, for example, or for drawer boxes that run on ball bearing slides. I also milled the interior trim for our home remodeling project out of alder. I don't use it as the primary wood for furniture anymore, mostly because I'm gravitating toward woods with more figure -- and also because it's softer than I like.

Hope this helps. -- Paul

Re: Alder?

#15

Re: Alder?

Nick Tuzzolino

>I made two sets of children's tables and chairs. I was easy to mill, finished nicely. No problems. It is approaching the cost of cherry here in So Calif.

Re: Alder?

#16

Re: Alder? as a designer wood?

Gary Camp Bend, Oregon

>During the last couple of years Alder, at least in this area has become a froo-froo wood. The last local tour of homes seemed to feature Knotty Alder in about 50% of the upper end homes. Knotty Alder, the old #4 stuff you would normally use in your smoker has driven the price of FAS Alder to be more than Red Oak here in Bend. As has been stated it is rather soft but I've not found that to be real problem. The hospital my dad worked used Red Birch plywood with Alder trim for all their interior case work (at least when my dad was working in their shop) and it seemed to hold up well. It works easily and doesn't stink like some Oak when you cut it.

glc

Re: Alder?

#17

JL

Re: Thanks all (esp. Mike) ...

JL

>From your comments, I gather that it is soft (somewhat like poplar). It does look pretty. I may pick up a couple of boards if I go by there.

They typically send their customers a postcard every other month listing the "specials". I'll have to think on a project.

Re: Alder?

#18

Some Young Church-going Woodworkers

George@Colonel's Workshop-Havertown PA

>Are called Alder Boys. :<)

George

Re: Alder?

#20

I always thought

Joanne Adler in Pt. Pleasant, PA

>that wood was named for me, since everyone always mis-spells my last name!

I used some Alder on the guitar stand I built for our contest. It's "okay" wood. Certainly not my favorite, but it was very utilitarian. I just used a clear coat finish, which it took nicely. It's been pretty sturdy.

Re: Alder?

#21

Re: Alder?

Evergreenbob

>I have used alder to build my grandkids beds and like it, Its easy to work with and clear boards are easy to find. I have lots of large alder trees in our back fields. its good for furniture and wood stove. I seal it with shellac before i finish it.

Evergreenbob in alder country