Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

New User Etiquette Question

Posts

New User Etiquette Question

#1

New User Etiquette Question

A.W. Ford

>Hello all, I'm a new user here. Other than some woodshop classes in high school some 20 odd years ago I have no real idea what I'm doing, but before I start pestering and just blathering all over your message boards I wanted to know if there was a specific section where I should be posting my ignorance to? :)

After renting all my life I just bought a house and have a large enough garage to finally start to try to build a workshop and do all those things I've always wanted to. My career is in the computer field and I'm afraid I've lost any youthful mechanical prowess I may have had, so believe me there will be plenty of ignorant questions coming from me.

It's a pleasure to meet you all and many thanks in advance.

A.W.

Re: New User Etiquette Question

#2

Re: New User Etiquette Question

Tim Caley - North Little Rock

>This is the place to post your questions. If any of your questions tend to sway away from a woodworking aspect, it is customary to proceed with an OT in the title, such as OT Electrial wiring question. This stands for Off Topic and some people like to skip those.

There are people here who have knowledge in wiring / circuity, cabinetry, computers, just about anything you can come up with someone should be able to answer or direct you to more information somewhere else.

And last, but not least, welcome to Woodcentral. This is a great place with a great bunch of people who frequent here.

Re: New User Etiquette Question

#3

And about a quarter of us have a DP background

Dave Bair, Eaton Rapids, MI

>

Re: New User Etiquette Question

#4

You came to the right place...

Dan Manturi

>If a forum like this (Heck, if the internet..) were available when i started with this hobby, I would have avoided a lot of errors, bad tool purchases, false starts. Visit the whole site. Read the articles related to your current interests. There is a whole lot of great info here. Ask questions and you will get sincere answers. There are no real flame wars here that i have seen. Even seasoned professionals post questions here. You get input from everyone, from beginners to the best in the business.

Good luck to you.

Dan

Re: New User Etiquette Question

#5

Re: New User Etiquette Question

Dan Donaldson

>Welcome to Woodcentral. I think that you will find a great bunch of people here that can answer most any kind of question. Depending on your interest, there are boards specifically designated for hand tools, turning, and this one, which is most anything, but the lines blur, and no one will shoot you for mentioning hand tools here or power tools on the handtool board.

There is a bit more info in the FAQ's near the top of the frame to the left.

Again, welcome and have fun.

Re: New User Etiquette Question

#6

Re: New User Etiquette Question

Mark Mandell - Gone Round In Jersey

>AW,

Not to worry. Lots (if not most) of us here were in your shoes not all that long ago. Just keep your sense of humor and your wits about you and you'll do just fine.

Welcome!!

mm

Re: New User Etiquette Question

#7

Go ahead....

Thomas Skaggs, Foothills of Mount Level

>....and blather! We need all the fresh blather we can get around here. I for one find some of the blather here is getting rather stale....especially my own! ;-)

Tom

Re: New User Etiquette Question

#8

Re: New User Etiquette Question

Barry Irby

>You have come to the right place. Ask away. There are Turning and Hand tools forums (left) also.

As mentioned, If the Subject of your question is not about woodworking, Post it as OT (off topic). Some people here dislike them and it has been discussed about moving them to an OT Forum or doing away with them, but many of us like them, both to be able to ask them and to answer. Some of those are somewhat related, (how do I wire my shop/table saw/whatever?) to really OT (Can't get the key out of my car?)

You mentioned Etiquette. This is a polite forum with no Flaming, no foul language, no religion or politics. No personal attacks, so keep it clean, go to your corner of the shop and come out woodworking. I personally like this aspect of the forum and hope others do as well.

Beyond that, ask anything you want, If we don't know, we will make something up (just kidding).

Oh! And welcome.

Re: New User Etiquette Question

#9

Re: Go ahead....

A.W. Ford

>Hehe, oh I have no doubts you'll consider it blathering. I'm rather well known among my colleagues for being long winded, a foible I'll do my best to avoid subjecting you all to :)

Re: New User Etiquette Question

#10

Re: New User Etiquette Question

Ken Oakley-Sunny St. Cloud, Fla.

>One of my favorite quotes is "There are no stupid questions-- just stupid answers", and I don't find many of the latter on this website, so fire away. This is a goldmine of knowledge and opinions.

Re: New User Etiquette Question

#11

Re: New User Etiquette Question

A.W. Ford

>Thank you so much for the warm welcome.

I'm sure you'll all regret it later ... :p

A.W.

Re: New User Etiquette Question

#12

Have you met George from The Colonel's Workshop ye

Ron Hildreth, Alta, Iowa

>Now there's a Blatherer!! hehehe!

Welcome to Woodcentral!

Ron in Iowa

Re: New User Etiquette Question

#13

This is the place for stupid

Mark Goodall - ATL - tooljunkie

>This is the place for stupid answers from me, to valid questions from you. Welcome!

There is alot of really good people here with really god information and answers.

Just don't take my answers too seriously because I really don't know what I'm doing either ;)

Happy Woodworking!

Re: New User Etiquette Question

#14

Post Away

Stephen Kirk in Quakertown, PA

>Your in the right place. No question is too stupid. Regardless of what you think, the dumbest thing you might get into is probably something that at least 2 or 3 people here have already done (myself included).

This is a great bunch of people with a HUGE level of knowledge, and everyone loves to talk about woodworking.

Be sure to post pics of projects (even in process is encouraged). No project is too simple.

Re: New User Etiquette Question

#15

And don't forget to support WC

Tom Pilsbury

>Since the education we get here at the forums is free it is only right for us to support WC and its advertisers.

Now go buy a hat!

Re: New User Etiquette Question

#16

Don"t fret, we are equal opportunity abusers.

Art Silva

>