Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Help me with jointer purchase please?

Posts

Help me with jointer purchase please?

#1

Help me with jointer purchase please?

Mike Schwing from Md.

>Bewildering numbers of choices out there in my price range - about $800-900. Whatever I purchase will end up on a mobile base due to space restrictions. I have 220v/30a power available as well as 115/20a. Would prefer an 8" jointer of course over a 6". Fence bed length becomes an issue over 70" - space issues again. Not interested in a benchtop jointer.

I like the PM54a, 6" jointer but its 1hp motor concerns me, even though it can be wired for 220v. At $799 it fits right in but I still need to add a mobile base.

I've had great luck with my Jet cabinet saw and the Jet JJ-8CS 8" jointer looks like it has good specs, too. It is a little over my price range but not too much. I suspect I will like the quality of the PM 6" jointer better than that of the Jet 8" but those extra 2"..

I don't know much about Steel City but they have 2 nice looking hobbyist jointers.

Then there's Delta. The X5 is really affordable but the table is only 48" long and its a 1hp motor.

This jointer will get a lot of use. I'm really up in the air about this. How badly will I want the 8" if I get the 6" Powermatic?

Re: Help me with jointer purchase please?

#2

A Suggestion

Hank Knight

>Mike,

I'm an old iron fan. Walker Turner made a great 6" jointer. They are heavy iron, run smooth and are compact in size. They appear on e-bay often and go for much less than you are thinking about spending. You could probablly buy one and do an easy rebuild with new bearings etc. for $500.

Just a thought.

Hank

Re: Help me with jointer purchase please?

#3

Re: Help me with jointer purchase please?

Howard Norman

>I haven't been following th jointer possibilities since I bought my Grizzly G0490. I got one from the first shipment to the US. It is a great jointer and was certainly the best value at the time it was purchased. The 8" capacity comes in handy fairly often for me.

Howard

Re: Help me with jointer purchase please?

#4

Re: Help me with jointer purchase please?

Mike Fitterling

>Grizzly makes some fine jointers. This is one category in which they really shine; even before the quality had gone up on other stationary tools in their line their jointers were well made. I used a Grizzly 6" jointer for years and countless board feet of lumber and only upgraded when a unpassable deal came up on a Northfield 12".

Good luck whatever you decide.

Mike

Re: Help me with jointer purchase please?

#5

forgot to mention Grizzly

Mike Schwing from Md.

>They are also in the running of course.

Re: Help me with jointer purchase please?

#6

JL

Re: Help me with jointer purchase please?

JL

>I recently bought the Steel City 8" industrial jointer. I am happy with it. It is the one with the parallelogram bed and is similar to the DJ-20. It also comes with a "built-in" mobile base (which is nice).

I looked at the Steel City 8" Deluxe jointer and I was fairly impressed with it also.

In my "test drives" of the jointers, I liked the Powermatic jointers, but I wanted a parallelogram bed and the Powermatic parallelogram was a bit more expensive. I also liked the DJ-20, but they didn't have a good reconditioned model at the time. Have you considered a reconditioned DJ-20? They are running about $800 around here.

Re: Help me with jointer purchase please?

#7

Re: Help me with jointer purchase please?

Kent in Emmaus, PA

>>> I suspect I will like the quality of the PM 6" jointer better

>> than that of the Jet 8" but those extra 2".

PM and Jet are owned by he same corporation, and I doubt you'll detect any difference in quality based on the brand name. In fact, there's now a Jet version of the 6" longbed jointer.

I'd go for Grizzly, myself.

Re: Help me with jointer purchase please?

#8

Re: Help me with jointer purchase please?

George@Colonel's Workshop-Havertown PA

>Good Morning Mike,

I commiserate with you. A few years ago I was in the same position, but with more financial constraints. Those kids just wouldn't stop eating! I looked at a lot of 6" jointers and was leaning towards the Jet, based on the fine performance of my Jet Table and Band saws. Before spending all the Jet money, I looked at Wilke Machinery's Bridgewood and found it had all the features for considerably less wampum. Its worked very well.

George

Re: Help me with jointer purchase please?

#9

My 8" jointer is costing me $25,000

Mark Goodall - ATL - tooljunkie

>Thaat's how much I'll need to spend to put on a house extension to keep this large jointer. We're fed up tripping over bikes in the house 'cause there's no room in the garage for them 'cause of the 8" jointer and other machines in the garage. We had a discussion last weekend..... I'm almost at the point of spending $25,000 for the expansion, or selling the DJ20 for $500.

Happy Woodworking!

Re: Help me with jointer purchase please?

#10

Grizzly or Bridgewood 8"

Dan Manturi

>6" jointer is nice, but the short beds are a little limiting. I recently moved up to an old 8" delta (used), but you can get a 8" Grizzly or a Bridgewood jointer for your price range and they generally get pretty good reviews. Do not know much about Steel City or Rikon.

In this price range, I see little difference, so go for the most machine - assuming average home shop use. To get a top model Delta or Powermatic or General, you may be looking at a lot more money.

My opinion.

Re: Help me with jointer purchase please?

#11

Re: Help me with jointer purchase please?

Larry Clinton At Frankfort (Central)., Indiana

>I am retired, have some (but few) financial constraints. I have been upgrading my shop equipment for the last 4 ~ 5 years. I have researched every tool purchase I've made until I have exhausted the supply of information and advice, then I've purchased. When money was an issue, I waited until I could buy a tool that was reputed to be in the best of it's class and that I felt would last, and satisfy me the rest of my life. About 2 years ago I upgraded my jointer. I had a 6" grizzly that I used for about 12 years. I wanted an 8" so went through my usual research. I found there is little difference in any of the brands either in quality, performance or longevity. I looked at the Parallelogram design, decided I didn't really see any major advantage. My old 6" jointer tables were still flat and coplanar within less than .004" after about 15 years, and had been moved in and out of storage (often by lifting it by the ends of the beds). I decided I did want the segmented spiral carbide cutting head. I purchased the Grizzly G0593 ($1069 delivered) - It is the same as the G0586 ($739 delivered), except for the spiral cutter head. If I had to do it over I would still make the same choice. I had to do NO adjustments when I assembled the unit. Beds are true and coplanar within .003 full length. Unit does an exceptional job on figured wood, can't tell much (if any) difference between the surface of wood from it and my Bridgewood planer with a Byrd head. If money is a constraint, you can buy the G0586 & upgrade in the future (if you desire) with either a Byrd or Grizzly spiral head for around $400. The Griz units abve have a 2 HP motor, decent dust chute (4" fitting furnished) magnetic starting switch, Rack and pinion fence adjustment, and good heavy cast Iron fence.

Re: Help me with jointer purchase please?

#12

Re: Help me with jointer purchase please?

Matt Robinette, Mt Juliet Tn

>Do you realy need a new machine? Check craigslist in your area or the different classified ads. I found a used 14" mini max jointer planer combo for less than your target price. Sure the ugly yellow paint is worn and chiped the tables have some rings where some one left their drink but it does the job. I don't belive that the wood can tell it is a older machine.

Re: Help me with jointer purchase please?

#13

thank you all

Mike Schwing from Md.

>I have received some very good advice as well as good ideas I had not considered. Thank you all. No, I do not need a new machine, I just missed a good jointer over the weekend on craigslist. If one surfaces again (no pun intended) before I buy new I'll go that route.

Re: Help me with jointer purchase please?

#14

Obvious answer

Dan Donaldson

>It obviously makes the most sense to add the addition, then you can fill THAT up with tools then.......

;-)

Re: Help me with jointer purchase please?

#15

Re: My 8" jointer is costing me $25,000

Barry Irby

>Mark, I posted here about adding on to my shop. (In case you haven't noticed there are a lot of people here who believe they are one tool and one square foot of shop space away from immortality or at least greatness.) Almost everyone enthusiastically said, GO For IT! I went to a friend who is in the cabinet business and mentioned it to him. (His shop is bigger than my house) He just laughed and said "look at this." Showed my the building behind his shop. Bigger than the shop. Was going to be the great addition. It's full of stuff, much of it the irreplaceable junk we all seem to collect. The stuff that sneaks into your life and fills the nooks and crannies. His advice was, Don't do it, it will just fill up.

Re: Help me with jointer purchase please?

#17

Re: Obvious answer

Ron Hildreth, Alta, Iowa

>Dan,

What is it they say--build a big shop and you'll wish it was bigger!

Ron in Iowa

Re: Help me with jointer purchase please?

#18

Re: Help me with jointer purchase please?

Don Bullock

>I have the same jointer and like it. There are many on the various forums that feel the same. I'd suggest that you do a search of the woodworking forums that you are on for more information on this or other jointers.

Re: Help me with jointer purchase please?

#19

Re: thank you all

Allan Campbell

>Mike,

You may want to look at this site.

http://www.redmondmachinery.com/browse.cfm/4,509.htm

I have bought a couple of tools from Redmond and they are good people to deal with. A DJ-20 is a fine machine and if a refurb isn't a problem for you $795 ia good price.

Allan

Re: Help me with jointer purchase please?

#20

What I've decided on

Mike Schwing from Md.

>Thank you for the suggestion Alan.

I've decided that if I buy a 6" machine I will immediately wish I'd have bought the 8". I also came up with some more money than I thought I'd have for the purchase.

With those things in mind I chose the Grizzly G0490X 8", 3hp, 220v jointer with spiral cutterhead. I am certain I will be pleased. Thanks again for all of your help.