Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Rubber rollers?

Posts

Rubber rollers?

#1

Rubber rollers?

jeff

>Hi all

Does anyone know if you can sand rubber rollers to clean them up.

I tried cleaning and renewing the roller on my sander, but it needs more.

Its a large roller 5" diameter by 13" long.

I was thinking of putting it on a lathe and truing and sanding it to bring it back to usable shape.

Will this work?

And any thoughts?

Jeff

PS: Rick, my wife deleted your phone number before I wrote it down.

Call or email me your number.

Re: Rubber rollers?

#2

Re: Usually grind thm to shape

Brian in Brighton

>Usually when I buy rubber coated rollers for various customers the outside diameter is ground to size. I am not sure of the type of grinding wheel used. You might want to do some searching for that. I doubt if a cutting tool will do the job as it will probably grab the rubber.

Brian in Brighton

Re: Rubber rollers?

#3

Re: Rubber rollers?

Doug Turner

>I was at a tire retread factory once and they used a powered wire bristle wheel. This cuts rubber very fast.

Re: Rubber rollers?

#4

Re: Rubber rollers?

Dale Stansbery

>I presume you mean cleaning and not shaping them. You might try Bleche White tire cleaner. It does a good job of removing dead oxidized rubber. Just use a good stiff bristle scrub brush with it.

Re: Rubber rollers?

#5

What about surface cracks.

jeff

>The roller also has alot of crazing (surface cracks), and the oxidization.

I had hoped surfacing it (a small amount) would help it.

The rubber still seems to be pliable and usable.

Jeff

Re: Rubber rollers?

#6

Re: Rubber rollers?

Pete in Holland, MI

>Your cutter on a lathe will dig into the rubber. It's too elastic to try to shear/peal cut. It needs to be ground with a coarse grinding stone/wheel.

If you have access to the technology, chilling it in liquid nitrogen will harden it enought to machine it though.