>There is a Wood Works show coming to the Richmond VA Oct 12-14. I find the brochure a little confusing. What do you get for the $10 admission? Are the vendors and floor demo's worth the price of admission? Is it important to attend the Seminars to heal you benefited? The Seminars (@ about $60) seem a bit pricey. What's your take on this?
>I go to every Woodworking show in the area. (The area to me is within 75 mile from home). I have always felt the ability to view the new equipment, often in action, has been well worth my parking, gas and admission fee. I often buy shop supplies, sanding disks, sharpening supplies etc. at the shows. The freight cost savings just about pays my way into the shows. Often at the shows, vendors will have specials, LV had a "free freight" special on anything ordered at the show. Also they and another vendor had a special on waterstones at the last show I attended. I bought a set at about $40 savings (including the freight savings). I bought my GrrRippers at a woodshow ($20 + freight savings). I probably wouldn't have purchased them had I not seen them demonstrated, sure glad I did. I have never went to one of the paid seminars. Always thought I would - just haven't found the time (or energy after walking so much). Usually there are several factory demo's showing their equipment in use. Dovetailing, bandsawing, Forrest saw blade use etc. A lot of the woodworking clubs have an exposition of their work. All in all I feel I get my money's worth. However, I am a hobby woodworker, never meant woodworking to be a paying proposition. I know many fishermen & campers that attend the sports and travel shows. Do they save money? Doubt it but sure have fun. Guess it depends on what you expect to get.
I have mixed feelings, but certainly recommend you go and see for yourself. In my opinion the variety of vendors and price breaks have declined in recent years, so for me the shows became less of a thrill. I no longer go to them because of reduced content, driving distance, and inconvenience due to a physical handicap. I did attend several seminars in the past and I thought they were generally worth the price. However, I did attend one or two which didn't expand my knowledge. It is a huge advantage to be able to look at and handle/test drive competitive brands of tools. Some of the demonstrations at various booths are fun to watch as well as educational. Further, being able to meet and mix with other WC folks is always memorable. So I'd say: GO!
>I just looked at the lineup on the website. I would definately go. I have been to the last 5 in pa. I love to wathc Frank Klaus "perform" with his hand tools. At the first one I went to, Stuart Mortimer inspired me to run home and turn my first spiral stemmed goblet from an old broken baseball bat. I do agree with George that the quality of the show has dropped over the years, but you deserve a day off to spend talking to and sharing with other people that share your passion. That alone is inspiring. Consider the seminars, if one appeals to you, they are expensive, but can be well worth it. Good luck and have some fun.
According to the brochure, it gives you a full show pass (entry into the show) for all three days. Purchase it online and it only costs $8. Use the included $1-off coupon at the door instead and pay $9. If you plan to attend more than one day, purchasing the Full Show Pass online is the way to go.
Are the vendors and floor demos worth the price of admission?
Many of the big vendors will be there, as well as locals like Charlie Harper (Harper's Hardware). These days machinery and tool show prices aren't what they once were. However, the demos are worth the price of admission by themselves. How often do you get to stand beside Frank Klausz while he's cutting dovetails and ask questions? Our own local craftsman (Suffolk, VA)and WC participant, Mike Jurnigan, will be there demonstrating his Windsor chair-making skills. If you've never seen Mike's setup and demo before, you're in for a real treat.
Is it important to attend the Seminars to heal you benefited? The Seminars (@ about $60) seem a bit pricey. What's your take on this
This is a personal choice only you can make depending on whether something is being offered you think would benefit you. I've been to a number of these at WoodWorks in past years and always took away some great information and felt like my money was well spent. This might be a good time to look at the finishing seminar where you could ask all the questions you wanted about applying that shellac finish and rubbing it out. Nothing beats help from the folks that know for sure!
Bottom line - I've been to several WoodWorks shows in the past and I'm excited they finally picked Richmond as one of their stops this year. When was the last time a show of this quality was here? I know I can't remember. I've said it before and I'll say it again, I believe the WoodWorks show is probably the best going these days. They have plenty of vendors there so you can see the products up close and find out more about them. What I think is more important, however, is the emphasis on education and the talented crafts people they assemble at each show.
Is all this worth the $8 - $10 price of admission? Absolutely!
>Even if you just want to walk around, $8-10 for admission seems like a good deal. Put it this way -- it's about the same price as a movie, so if you think you can amuse yourself looking at vendors and the free demos for two hours, that's pretty good value.
As far as the seminars go, $60 for a 2 hour seminar is pretty good. Think of it this way -- given the experience of the teachers giving the seminars, that's $30 per hour for top notch professional instruction and training, which is pretty reasonable.
Not to sound too mean, but saying that $60 is too expensive for a woodworking seminar given at this level is kind of like the same train of thought that makes most people think that paying hundreds of dollars for a handcrafted piece of furniture isn't worth it.
>Yes, I've been to two of them - Michigan and Indiana several years ago. Excellent, well run shows. Frank Klaus is a joy to watch. If Yeoung Chan is there, so is he. Actually, I found all of the demos to be top quality. The seminars are pricey, but well worth it - but pick and choose - take one or two that will enhance your skills. Any seminar, academic or woodworking, is more interesting and fun if one alrerady has a decent knowledge of the subject.
Oh yes, I plan to go to the show in Schaumberg, IL, in February. It's just down the road a piece for me.
>like a one-eyed dog in a meat market the first time You go, I know I was. Woodworking shows are a great opportunity for the Grizzly's and Sunhills and MiniMaxes and Rojeks without a retail presence let people see and touch their wares. After I went to a few I was less enthusiastic, haven't been to a woodworking show in a couple years.
>Haven't been to a woodworks show, but I've been to a bunch of thewoodworkingshows shows. 90% chance I'll be at the Richmond wooodworks shows after years of the york, pa show falling on a busy weekend.