Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

WC Weekend Accomplishments.....

Posts

WC Weekend Accomplishments.....

#1

WC Weekend Accomplishments.....

Dennis E. Peacock

>Good Morning

10 Sep 2007

I hope all of you had a nice weekend. It's been raining and storming here for what seems like forever, but it's still raining today. Sure wish you could spread this rain out over the dry summer months so it'd be an even rain for every month.

Been working on vacuum veneering the curved ends of the kitchen table. I'll have the remaining curved end veneered today. I'm really enjoying the vacuum press and don't know how I got along without one.

Came home from bass playing at church yesterday only to find that the A/C in the house went out. Needless to say, I'm spending some time this morning to call someone out to fix it. I slept lousy last night because it's so hot in the house and ain't much better outside.

Any way...better get out of here and busy making phone calls.

So what did YOU do this weekend???

Best of weeks to you all.

Dennis

Re: WC Weekend Accomplishments.....

#2

Re: WC Weekend Accomplishments.....

Brian in Brighton

>I got the garage ready for inspection and have the vertical posts up for the shelving.

Brian in Brighton

Re: WC Weekend Accomplishments.....

#3

Re: WC Weekend Accomplishments.....

Scott Whiting - Glendale, AZ

>I actually made sawdust in addition to grinding dust on Saturday. The cart is holding a Spiral cutter grinder. Because it has a part that moves parallel to the floor I sized the cart so, depending on which position the machine is in, the spindle is either 2" above my elbow or 3" below. Good thing I had plenty of clamps as the fine materials from Home Depot needed a bit of encouragement to conform to each other.

As far as the weather goes it is just hot and dry.


img

Re: WC Weekend Accomplishments.....

#4

Re: WC Weekend Accomplishments.....

George@Colonel's Workshop-Havertown PA

>Good Morning Dennis and a Happy

SWMBO came back from the Jersey Shore to attend a funeral, and stayed home the balance of the weekend. She was able to help positioning the chest-on-chest in the sunlight for a good tanning. It was the first time we viewed the piece with c arcases each on position and with all drawers installed. It looks grand, and all the drawers seem to fit well, despite the present humnidity. Will probably commence the finishing schedule next week. Otherwise, I cleaned the shop partially, and it does need a great deal more. Today we will do bowl turning. Charlie says howdy.

George

Re: WC Weekend Accomplishments.....

#5

Ellis Walentine

Shop time!

Ellis Walentine

>Seems my available hours are getting fewer all the time, but this weekend I tackled a project for the house: Kitchen countertops. We decided not to replace the cabinets because time and money are somewhat tight, but the old Formica countertop just has to go. I was going to get Zodiaq® but the sticker shock practically knocked me over. Then I started looking into new formica and thought, "Hey, I've got a shed full of odds and ends that I will never use if I don't use them." (How's that for tautology?)

So... I fished out half a dozen 14' birdseye maple boards, jointed, planed, ripped and rough-sized them for new counters. (Our kitchen is tiny, so we're only talking about 18rf of counters.) Hopefully I will get them glued up and finished sometime this week. But, what a treat to actually make something for a change.

Ellis

Re: WC Weekend Accomplishments.....

#6

Re: Hey Colonel.....

Dennis E. Peacock

>Colonel,

Glad to hear that you are making progress on the C-on-C piece. That was some really nice wood I saw in your shop when I was there.

BTW, tell Charlie that he needs to email me a list of starter carving tools. ;-)

Dennis

Re: WC Weekend Accomplishments.....

#7

Re: WC Weekend Accomplishments.....

Bartee ( Metro Atlanta )

>I have been doing a lot in my shop lately to improve the shop.

After installing the new G0953 8" Grizzly jointer with sprial cutters, it came time to finally finish up some wiring.

So I got the old 6" Delta/Rockwell belt sander running with at branch off the 220v circuit.

I got 3 new ceiling plugs for some more hanging florescence fixtures.

Helped LOML reorg the kitchen. About 20 trips up/down the basement steps to put stuff in storage.

Now all I have left is a long 110v plug circuit and getting my Grizzly G0441 DC installed.

So I had a GREAT weekend!!! Shop time, LOML time and church.

Re: WC Weekend Accomplishments.....

#8

Re: Shop time!

wilbur

>I would never think to describe 14 foot long birdseye maple boards as "odds and ends". One can only imagine what your "good" stash of lumber must be like. :@)

Re: WC Weekend Accomplishments.....

#9

Re: Hey Colonel.....

George@Colonel's Workshop-Havertown PA

>Okay Dennis,

He's Makin' a list

Checkin' it twice

I'll email you what he comes up with.

I used a little Potassium Dichromate on the birch ply panel in the lower top to darken it up a bit before finishing. At some future date someboidy may want to use the bottom chest as a window seat or something similar. I'm not going to affix the top chest to the bottom chest with anything other than a couple vertical cleats at the rear. Wedded together and with drawers installed it weighs as much as my neighbor's wife.

George

Re: WC Weekend Accomplishments.....

#10

Too many dogs & gun towers!

Art Silva

>

Re: WC Weekend Accomplishments.....

#11

Re: Hey Colonel.....

Carol - now in NC Nebraska

>"Wedded together and with drawers installed it weighs as much as my neighbor's wife."

It begs the question, George.

You would know this how??? LOL

Re: WC Weekend Accomplishments.....

#12

Soccer X 7

Mark Goodall - ATL - tooljunkie

>7 soccer outings - 1 practice and 6 games.... luckily I only coached a few of them. Man this is tiring, and it wasn't even a full weekend!

Happy Woodworking!

Re: WC Weekend Accomplishments.....

#13

Getting started on Christmas gifts

Tom Pilsbury

>Made a couple of Zen Gardens out of Cherry and 1/4" Plywood left over from some other projects. You can't see the feet but they're simple 1" square blocks of Walnut.

Believe it or not some people actually appreciate getting rocks for Christmas. LOL!


img

Re: WC Weekend Accomplishments.....

#14

Another gift

Tom Pilsbury

>This "Awsome" gift is for one of my former shipmates who has a bad habit of losing his keys.


img

Re: WC Weekend Accomplishments.....

#15

Re: WC Weekend Accomplishments.....

Nathan

>I spent from Thursday morning to this morning, almost non-stop, laying the tongue-and-groove pine floors in two upstairs bedrooms. Total area 360 sq. feet. The boards are 12 1/2 feet long and I layed them on 16" centers as recommended here. I made the sleepers in my shop, from 8/4 plainsawn pine, and the sleepers are 16" apart, also as recommended. The T&G floorboards I got were very good for the most part, not too many knots and most of the boards were straight enough.

Today I had the flooring contractor out to sand and oil the floors. They look great! Now all I have to do is make and install the molding and the thresholds... That will be Round 2. But that will be child's play compared to what I've been through these past six days... I'm really feeling the pain from carrying all those 12-footers up the stairs.

Since this is the first time I've ever done anything like this, I appreciate the help I received here on Woodcentral.

Re: WC Weekend Accomplishments.....

#16

Re: Soccer X 7

Glenn Madsen near San Francisco

>Weekends like that killed our soccer involvement, back when the boys were young. There were games spread out all over the middle of the County, and with a son every two years in age, they were never in the same place.

With swimming, they were always at the same pool together, even if the drives were sometimes longer, especially as they got better.

Thank goodness they all grew up well. Enjoy your time with them!