Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

OT--Transmission problem, '93 Explorer

Posts

OT--Transmission problem, '93 Explorer

#1

OT--Transmission problem, '93 Explorer

Gary Evans Tallassee, TN

>Hi all,

My Explorer has just developed a problem of not engaging readily in Reverse or Forward after it has set overnight. After it finally does engage, which it does quite solidly, there is no slippage or any other problem to be seen with the trans. Once it has been driven for 6 or 7 miles, it can be parked all day without having the same problem.

I'm thinking a sticky solenoid, but I don't know if it uses the same one to engage Forward and Reverse. I'm starting to do some research and will call a transmission guy tomorrow, but my main man on transmissions got killed in a motorcycle wreck a few months ago, so my resources are diminished.

Any help would be appreciated.

Thanks,

Gary

Re: OT--Transmission problem, '93 Explorer

#2

Re: OT--Transmission problem, '93 Explorer

Ron Hildreth, Alta, Iowa

>Gary,

Most transmissions regardless of manufacturer, has a valve that prevents the fluid from completely draining down into the transmission pan. This is to keep it lubricated in the event of a cold start. It also prevents the symptoms you describe. Evidently yours is sticking and allowing the fluid to drain back slowly. Have your transmission serviced, and while they're at it, ask the mechanic to add a pint of Trans-X or something similar. This will clean up the inside of your tranny, including the valve. If this doesn't work (you'll know within a couple of hundred miles), then it's probably time for an overhaul.

Ron in Iowa

Re: OT--Transmission problem, '93 Explorer

#3

Dale Lenz

Re: OT--Transmission problem, '93 Explorer

Dale Lenz

>Hi Gary,

My Ford Mech. son, Josh told me to tell you to start with a tranny flush. Ford does not recommend any transmission addive. Josh was telling me something about seal and servo and value body. Anyway, Josh suggested a flush and you may be looking at another tranny in the future. If you can get it fixed with a flush might be time to consider trading it in.

Good luck,

Dale

Re: OT--Transmission problem, '93 Explorer

#4

Re: OT--Transmission problem, '93 Explorer

Dave's Not Here

>*************************************************************************************

*************************************************************************************

*************************************************************************************

*************************************************************************************

The above is my tale about my 93 Explorer and it's transmission problems. I figured you wouldn't want to read such a sad tale so I wrote it in code. Long story short, the Ford dealer said he'd be glad to fix it for $3000. I really loved that vehicle and hated to have to put it down.

Re: OT--Transmission problem, '93 Explorer

#5

Flush/Fill WARNING

Jason Roehl in Mulberry, IN

>I just want to make sure you know what you're in for if you do a flush and fill. These are usually best on vehicles that have always had this maintenance performed at regular intervals (15-30,000 miles). If not, a flush and fill can finish off your tranny. What happens is that crud and stuff can build up on valves, but it forms its own seals while deforming the real seals. When you flush it out and fill with new tranny fluid, some of those old deposits come loose, leaving behind seals that no longer mate properly, causing your transmission to malfunction in one way or another.

You will find many people who think that a tranny shop did something wrong when they got a flush and fill, only to have their tranny die shortly thereafter, when it was really their own neglect that the flush and fill brought to light.

Just something to think about, but I apologize if I have rained on your parade.

Jason

Re: OT--Transmission problem, '93 Explorer

#6

Re: OT--Transmission problem, '93 Explorer

Gary Evans Tallassee, TN

>D-oh!

I feel like I've had a Homer Simpson moment. I'm driving around this evening after the above post, hypothesizing about solenoid problems, computer problems, et.al., when I realized that I haven't checked the fluid level lately. I had the trans serviced about 10,000 miles ago, so it didn't even occur to me that I might be low. Guess what?

I'll report back tomorrow on the performance of the transmission with the correct fluid level and next step will be to take a crawl underneath and see if I can see where the fluid is coming out.

Dale,

I'm not quite ready to give this one up yet. This is the best car I've had in quite some time. I graduated up from an '88 Isuzu Trooper with 280,000 on the clock. This one only had 145,000. I've just gone over 160,000 and everything is still working. The motor feels particularly strong. I was using it a week ago to pull some good sized logs around.

Like I say, the transmission continues to feel solid, except for this little glitch. I won't be surprised to continue to have good performance once I fill it back up. The problem may come in replacing the seal or gasket that is leaking.

I intend to get the trans rebuilt when it becomes a necessity, but I won't do it till then. Hopefully, I'll have more money when it finally goes down, but Murphy's law probably postulates the opposite.

Gary

Re: OT--Transmission problem, '93 Explorer

#7

Dale Lenz

Re: OT--Transmission problem, '93 Explorer

Dale Lenz

>Gary,

Josh, assumed you checked your fluid level, : ' >. Glad Murphy is bother you and not me today. I've spent most of a shop day sharpen plane irons, had to regrind the angles. Seems like I was trying to plane with a freshly sharpen iron that had a 45* angle on the iron. Happens ever few years, I like to cheat on my iron sharpening but, it catches up with me sooner or later.

Hope your fluid level solves your tranny problems.