Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

dewaltservicenet.com - need bearings!

Posts

dewaltservicenet.com - need bearings!

#1

dewaltservicenet.com - need bearings!

Sue McLam in Orange, VT

>I've been trying to get to www.dewaltservicenet.com off and on all day and can't get there...anyone else having trouble?

I appear to need some new bearings for my Delta table saw arbor and I wanted to go there for ordering and instructions to see if it was even feasible (read Easy) to do it myself.

I'd never heard of that site before but Delta points you to it from their site.

Sue

Re: dewaltservicenet.com - need bearings!

#2

Re: dewaltservicenet.com - need bearings!

Bill Hammond, Oregon Coast

>I wish you luck. That sight was so unhelpful, user hostile and slow that I decided to buy a new router rather than try to find parts. Now I may have just been having a bad day or perhaps my brain was on a break and your experience may get better millage but....I thank dewaltservicenet.com for my new Milwaukee router and I expect that Delta will not be in the running when I look at my next major tool purchase.

Now to your question, I have tried the site today and get a server too busy message.

bill

Re: dewaltservicenet.com - need bearings!

#3

Re: dewaltservicenet.com - need bearings!

Sue McLam in Orange, VT

>Bill,

Thanks for the heads up. If and when I ever can get to that site now I know what to expect.

Sue

Re: dewaltservicenet.com - need bearings!

#4

Go Local� *LINK*

Jim Rahbe, Bedford, TX

>Sue,

I suggest you just visit your local bearing supply house. Most bearings come in standard sizes, and they can easily provide what you need for a lot less money than Delta wants for the same bearing. If you take them the arbor, they will remove the pressed on bearing and install a new one for almost nothing. Take a look at the Link below and it should give you an idea if this is something you can/want to do. I documented the basic bearing removal process for a Jet cabinet saw, but I suspect they are all about the same. If your saw is a contractor type saw, I suggest you seek additional advice..

Jim R.


Bearing Removal Pics

Re: dewaltservicenet.com - need bearings!

#5

Re: Go Local�

Sue McLam in Orange, VT

>Hi Jim,

I actually had read your article earlier today. I have the Delta 10" Contractor saw, model 34-474. I think that what I'll do tomorrow, minimally, is take off the top of the saw. Then I'll see what I can do from there. I just looked in my Yellow Pages and it looks like I'll have to drive 50 miles to get to a bearing specialist, so I'll give them a call too.

I do have a Delta salesman/repairman about 20 miles away from me, and he's a great guy but his rates are a little high for my wallet. But I'll go to him if I have to.

Sue

Re: dewaltservicenet.com - need bearings!

#6

Re: Go Local� part 2

Jim Rahbe, Bedford, TX

>Sue,

I believe that one of the advantages to the cabinet saw is the ease with which the top comes off. I�m pretty sure this is not true of the contractors saw and I suspect it might not be so easy. I�d like to explain the differences, but I�ve never had a contractors saw apart. Maybe one of the others here can explain..

Jim R.

Re: dewaltservicenet.com - need bearings!

#7

Re: Go Local� part 2

Sue McLam in Orange, VT

>I've got the book that came with the saw so I can look at the diagram. I'll plan on spending lots of time on my hands and knees :)

Re: dewaltservicenet.com - need bearings!

#8

Check with an automotive machine shop

Phil Joines Krum, TX

>A lot of them can order and install the bearings.