I've got an opportunity to buy some amazing lumber from a guy with a sawmill. He's been in the biz for decades. He's got some air-dried walnut and cherry boards up to 20" wide and 2" thick. Does anybody know the going rate for that kind of stuff. I just want to know enough to be able to negotiate a fair price.
>Where I live, along the NJ/PA border, prices from local lumber suppliers vary considerably. I can get walnut as you described from one local sawyer for $2.00/bd ft. Other suppliers in my area charge closer to 4-5/bd ft. for S2S.
>All due respect, special lumber comes with special prices. 20" wide 2" thick walnut/cherry; Especially if it's clear and to top it all, figured or something, price can go around $40~$50 or more! Of course, if the overall quality is there and it's exceptionally grained and/or figured. Otherwise, for those dimensions $5~to~$10 is fair, depending on the flaws in each board. The other factor is supply-demand. If nobody is buying it, one may get a much better price, regardless whatever the condition of the lumber is.
Where in TN do you live? (I'm somewhat north of Knoxville)
A few years back I bought air dried hardwoods from a local mill, but in "standard" sizes, nothing like the widths you mentioned. I paid something like $2/bd ft for cherry air dried three years.
I personally would worry about the wood movement for such wide pieces, but I guess that depends on the application.
I've since set up my own sawmill so I'm accumulating my own lumber and have not checked prices recently. BTW, if I remember correctly the sawmill I mentioned was in Blaine - found it on Woodfinder.