Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

How did you get started in woodworking?

Posts

How did you get started in woodworking?

#1

How did you get started in woodworking?

Carol - now in NC Nebraska

>This topic came up on another forum. I thought it such a good topic that I posted it here. I know lots of you through the Internet, some for years. It would be interesting to see how you got 'bitten'. I'll begin.

No real woodworking genes in my family. My grandfather (a dairy farmer) repaired broken furniture during the winter months for the extended family. His 'shop' was a windowless hut with a dirt floor, equipped with a few hand tools. He brought his glue-ups into the kitchen (huge room with a wood cooking stove).

When I am about 6-7 he set me to making 'pine curlie-ques' with a handplane. I finally filled an entire bucket, learning along the way to fettle the plane and plane perpendicular edges. Only tools were a vise, handplane, and try square. Mywork was validated when he took the bucket of plane shavings into the house and gave them to my grandmother for fire starters for her wood stove. The seed was planted.

Of course I grew up in the era that girls were not permitted to go to woodshop in school. But I collected cheap tools and muddled along with the help of Popular Mechanics magazine - mostly dreaming. I always got into big trouble using the tools given to my brothers who had little interest in using them. After school I started buying tools. What a help a woodworking forums would have been. But that was before you-know-who 'invented' the Internet. LOL

In the late '80's I started woodworking classes in a community college. By the middle '90's I was a full-time woodworker and back teaching at that same community college. That led to demonstrating at woodworking shows around the country, writing a book, and then speaking at home remodeling/improvement/garden shows. An auto accident forced the closure of my business and I moved to Arizona to "retire." That led me to enter seminary to follow another passion. Along the way I acquired a Jet mini-lathe, took a few classes on turning, and started that slippery slope. :)

Good question!

Re: How did you get started in woodworking?

#2

Re: How did you get started in woodworking?

frank shic

>i moved into an overpriced fixer-upper here in northern california and i didn't want to pay the contractors all that money to do something i could do myself. it started with laminate flooring, progressed to base molding and really started with some garage shelving units. from there, it rapidly ballooned into kitchen cabinets, built-ins and most recently: a deck! i went through a hand tool phase but have since liquidated most of my hand tools except for a couple of chisels, saws and hand planes. i'm currently focused on cabinetmaking but might return to furniture making in the future - when i can afford a bandsaw and a festool domino! great question, carol!

Re: How did you get started in woodworking?

#3

Re: How did you get started in woodworking?

George@Colonel's Workshop-Havertown PA

>Good Morning Carol,

My Father's shop contained many woodworking tools. I was always encouraged to be around when they were used. And I thought it was fascinating. Being small, left handed, and poorly sighted resulted in a lot of frustration despite all the learning. It never seemed to bother him when I'd drop a chisel or break a bit. I recall watching Dad and our next door neighbor fabricate stoorm windows and screens for both houses,(16 per house) using a little Sears 8" table saw, then glazing and screening the frames. The scream of the blade thru the wood was a happy sound. My father bought me a Delta Homebuilt Scroll saw and I enjoyed using it very much. The mental seed was sown but it took another 20 years or so before I had time or need to get involved seriously in woodworking again. Airplanes and girls, in that order, were more of an attraction.

George

Re: How did you get started in woodworking?

#4

Dale Lenz

Re: How did you get started in woodworking?

Dale Lenz

>After getting married in 1979, I wanted to continue my dream of being a forester. I'd been going to Jr. Colleges in the Oklahoma City area, while working. My wife, Margaret, agreed to work and I'd go to school full time. So we sold our house in the city and brought down in the town of Stillwater, home of Oklahoma State University. The house was had a small kitchen. Margaret, ask if I could build a floor cabinet for the kitchen. All I had tool-wise was a 15 dollar refurbished "skill-saw" and a B&D jigsaw. We, I wanted raised panel doors on the cabinet. Ask Margaret for a router for Christmas, got a Sear's one with rack & pinion adjustment, still have that router, although don't use it much any more. Decided I needed a table saw or such, not much money back then. Seen a stamped out steel table device that you could attach a circle saw to make a table saw, router for a shaper, and jigsaw for a scroll saw. Got the wonderful contraction, turned out to be a piece of junk. But built the cabinet with raised panels, did I mention the raised panels did not have a frame around it, : ' >. Did not know any better and since I build the cabinet out of birch plywood did not matter. I was very proud of that cabinet, it looks like crap, as I look at it now, it's a shop cabinet now. But, the cabinet reminds me how far I have came since 1980 or so.

Re: How did you get started in woodworking?

#5

Ric Taylor

Re: How did you get started in woodworking?

Ric Taylor

>I was curious about woodworking ever since I was a teenager, but there were always too many other things going on in my life. Eventually after going through a divorce, and wanting to send my life in an entirely different direction, I decided that was the time to get started. I never looked back after that.

Ric

Re: How did you get started in woodworking?

#6

Re: How did you get started in woodworking?

Clint Searl, at the base of Haycock Mtn

>My interest in woodworking and furniture making began at an early age, and I read everything I could get my hands on about the subject. My dad encouraged that interest and bought me my own little hammer and saw, so that by the time I was five, I had made my first Goddard shell front bureau out of true Cuban mahogany. After duplicating all the examples of 18th century Colonial American furniture at the Winterthur Museum, I decided to move on to an as yet undeveloped style. When I was twelve, a gentleman of Japanese heritage named George Nakashima asked me to mentor him in his endeavor to learn joinery and guide him in designing furniture of more naturalistic character. I was happy to oblige; and with the reinforcement of some local wild mushrooms, I led him to understand and appreciate The Soul of a Tree. He subsequently went on to become rather successful in life, but even more so posthumously. Throughout the following decades I shared my interests with a parade of struggling craftsmen. Maloof, Krenov, Castle, Bennett, and many others benefited from the association. In the meantime, I started a magazine dedicated to the craft. Now, in my retirement years it�s rewarding to look back on the impact I�ve had on, not just the evolution of those in the field and Fine Woodworking, but also the spawning of an industry of inventors, manufacturers, and purveyors of the myriad tools, machines, fixtures, jigs, rain forest wood, and gadgets, who try to satisfy the yearnings of all the wannabes.

That�s my story, and I�m sticking to it.

Clint

Re: How did you get started in woodworking?

#7

Re: How did you get started in woodworking?

Barry Irby

>When I was 7 we had a big family gathering at my maternal grandfather's. We kids wanted to play baseball, but no one had brought a bat. My grandfather went off to his shop in the barn and made one. He was a farmer and a barn builder, but not really a furniture maker. He did not have a lathe. He made the bat with a draw knife and some rasps. It was magic. I would give my entire shop for that bat today. I'm sure it is long gone. He died later that year and that was fifty two years ago.

My other grandfather used to pay me to make tomato crates. They were four sided slatted crates he put over his tomato plats to keep the off the ground. He raised enough tomatoes for the whole county. I got 15 cents for each crate.

In eighth grade, I took high school shop and had a wonderful teacher. By the end of the year, we had built a really nice walnut side board for him. Wonder if shop teachers can still do that? Have the students build it and take it home. The turning bug bit me and I bought a Craftsman lathe. Still had it until about four or five years ago. When I was 16 I bought a RAS. I still have it. Use it almost every day.

In the ninth grade we had a different shop teacher and he was not a woodworker at all. He let me have the run of the shop though and I ended up showing a number of other guys what I had learned. Then the school asked me if I would spend my study hall in the shop with another class and show them a thing or two. There are still one or two people around that remind me I taught them shop.

Re: How did you get started in woodworking?

#8

Simple, discovered Norm and the NYW

Dave Bair, Eaton Rapids, MI

>

Re: How did you get started in woodworking?

#9

Re: How did you get started in woodworking?

Carol - now in NC Nebraska

>And that is a heck of a story, too! LOL

Re: How did you get started in woodworking?

#10

Re: How did you get started in woodworking?

john lucas

>It was simply. I needed some book shelves for my apartment in college. Bought a jigsaw and made them. Then christmas was coming around so I made some oval picture frames. Didn't like that so I bought a router and built a fold up workbench for my open garage. Use the router and jigsaw to make 25 pairs of the oval picture frames for that christmas.

I got to where I could build just about everything with those 2 tools, a handplane, orbital sander and handsaw. I rough sized everything with the saws and then planed and jointed with the router, then built everything. That eventually led to buying a shopsmith. Mostly because that's what my grandfather had and I didn't have room for anything else. I built a lot of stuff with that thing in a very small space. You can obviously do nice work with that tool but I found out how much of a handicap it was when I was able to upgrade to standalone machines.

I now have a 2 car garage shop that you can hardly walk in. Even though I have all the machine tools I need I've been going back to hand tools. I just like the way it feels to use a well tuned sharp tool.

Re: How did you get started in woodworking?

#11

Re: How did you get started in woodworking?

J Runchey

>I took woodshop in 8th or 9th grade which set the seed. I wanted a sailboat to take up to my FIL's cottage, so I bought a used shopsmith for a hundred bucks and built a 14 footer in the basement where we rented an apartment. That was my first project. I still have both the shopsmith and the boat from 1959.

Re: How did you get started in woodworking?

#12

Re: How did you get started in woodworking?

Keith Newton

>I started off carving. I was the youngest child, so when my oldest sister married a young man who had graduated from the U of Arkansas, who had traveled to Europe, and brought back a carved boar, that was close enough to a Razorback for me. I wanted one so badly, that I duplicated my own before I went up to join the team.

But maybe I could count the couple of dozen tree-houses. I am nearly sixty, and I still like to climb trees.

Afterwards it was just natural to try other things which led to my getting a job as a carver for a furniture-maker in Dallas back in 69. This led to my starting my own shop when I left, and I have tried to continued to add to my bag of tricks ever since. If I ever get to where there is nothing else to learn, I will be bored stiff.

I like to teach, but not beginning, yet, I find that most people who are past beginners think they know it all and become harder to teach. Maybe I just keep running into hard-headed people. Ha

Re: How did you get started in woodworking?

#13

Wellllll.

Don henthorn

>An uncle who was an electrical engineer and a serious hobby woodworker gave me a set of line tools while I was in the 10th grade. These were small woodworking machines that were connected by belts and pulleys to a drive shaft powered by a small motor. I had fun with the set and made all kinds of things with it including a wood fence for the backyard, rat houses, a trap door in the kitchen floor into which my mother could sweep the kitchen debris where it descended in a chute to a bin in the basement.(My kid brother went down the chute when he was pretty small and scared everyone to death), And dozens of other projects. There was a little lathe with a Jacobs chuck to hold the work. I used a quarter inch square headed bolt (old timers will remember them) driven into spools to turn all kinds of little vases, etc. My Mom had a set of modern silverware with celuloid handles. Most of you won't know what celuloid was. Celuloid happened to be highly combustible. My Mom had them in a pan on the stove waiting to be washed and a teakettle was heating near them. They caught fire and burned off the handles. Mother was crushed. I took the metal parts to the basement and stored them away. That Christmas after the tree was taken down I carried the trunk to the basement and cut it up and turned a new set of handles for the silverware. The cedar looked great. Mom was just floored and used the silverware for years after. I kept up the hobby my whole life and have made many, many things. It has been a blast and I still enjoy woodworking when I can get up the energy. I also enjoy woodworkers like the ones found on WC. God Bless you all.

Re: How did you get started in woodworking?

#14

Re: How did you get started in woodworking?

Stuart Hough

>My wife and I were out looking at furniture, not really ready to buy, just out on a lazy day on a "fact-finding mission". A sign in the window of a store-front stated "Exotic Wood Furniture", so we decided to stop in and check it out. A large dining room table caught my eye. It was made from some African wood that I still can't pronounce the name of. The light danced on about the grain, and even my wife, who revels in Formica because it's easy to clean, said that the table was beautiful. She made a wisecrack that if I got my face any closer to the surface, I'd have splinters up my nose ( I was trying to determine how thick the finish was). Then she hit me with that zinger!

"You've been complaining for so long that you don't have a hobby, why don't you build me something like that guy on that WoodWorks show!"

All at once a million thoughts raced through my head! Does she know what she is allowing me to do? Does she realize how many TOOLS I'll need to buy?? Is she really willing to indulge me to the extent that I might have to build a workshop bigger than my house...something I have dreamt about these many years??? Could I ever be good enough to host my own T.V. show??? (Whoa Nelly! Slow down big fella! Come back to Earth!!!)

That was what started me on this path. While I have never had enough time to be able to spend a whole day in the shop..I mean garage...I have done a few projects. I built a platform bed for my daughter, a picture frame that took me a year to complete as I built my repertoire of tools and skills, and a bookcase form birch ply with poplar edging (my first project). All along the way I have read books and magazines and taught myself, or stumbled upon, the skills and confidence I needed to create the next project. With any luck I can still be learning and doing for a bunch of years to come.

Re: How did you get started in woodworking?

#15

Steve Strickland

Re: How did you get started in woodworking?

Steve Strickland

>I started building 3D polyhedral dissections in lead crystal. I was using a 10" RayTech diamond saw with power feed and oil bath. The development required for the jigs was taking far too long so I decided to develop my jigs and build prototypes in wood. I got a Delta 10" table saw and went to work. I decided to sell my wood prototypes online and they sold pretty well. I developed an online store and started woodworking full time. I never tried building another one in crystal.

I had never done any woodworking before. Thanks to Woodcentral I was able to develop some pretty decent techniques. I guess I have sold about 12,000 pieces over the past 11 years.


img

Re: How did you get started in woodworking?

#16

Re: How did you get started in woodworking?

Moses Yoder in White Pigeon, MI

>Our 7th grade shop class built checkerboards. My checkerboard came out better than most and I remember our grumpy old shop teacher telling me it looked great. I think I was hooked right there. In high school I designed and built a nice desk which I used for many years afterward but eventually gave away. I never thought I would want to be a professional woodworker, but my life just kind of drifted in that direction. I currently run a computer instead of a tablesaw for my day job but the real fun is in my little garage shop at home. I enjoy working with hand tools and have just gotten a neat little carving tool set and plan on damaging various pieces of wood with it. I'm 40 years old now so I'm at the stage where I figure if I want to do it I might as well do it now.

Re: How did you get started in woodworking?

#17

Re: How did you get started in woodworking?

Larry Clinton At Frankfort (Central)., Indiana

>My father was a "Jack of all trades" and did a little woodworking in his life. I have a walnut footstool, with harness hardware for legs, he made in the late 1800's I wouldn't sell for any amount. He passed away when I was 10, so I had to do all the "man" repairs around our home. I made cabinet doors for our kitchen sink from 1/4" plywood. I made new screens for all the windows etc. When I was in high school, I built a bookcase from Eastern red Cedar. My mother had it till she passed on, now it is in my second son's home. I built one house, remodeled one, built bookshelves, installed cabinets, small projects, but never had the time or equipment to do much "fine woodworking". I raised 6 children so both money and time was pretty short. After the children were raised I started purchasing some (cheap) woodworking equipment. Made a few things but didn't have space or time to make any large projects. Just prior to my retirement after 39 years as a manufacturing / quality engineer, I (with my son's & friends help), built my dream workshop. I started purchasing top grade equipment a couple years before retiring - now have a really nice large, well equipped shop. Now if I only had the skills to match. I really enjoy working in the shop, been retired for 1 1/2 years. I have rebuild some heirloom chairs, made several small projects and am in process of finishing up a cedar lined white oak blanket chest for my DIL.

Re: How did you get started in woodworking?

#18

Geeze Clint

George@Colonel's Workshop-Havertown PA

>Now you have replaced Norm as my hero! I'd never have known of your total greatness without your overly modest account. Do you also give Grace?

George

Re: How did you get started in woodworking?

#19

Re: How did you get started in woodworking?

Jay St. Peter - SoMD

>I did a few things in jr high woodworking class and kind of enjoyed it, but really didn't do much other than the usual lamp and napkin holder. After college, I got a decent car and started modifying it. Every time a mechanic touched it, I had to clean up his mess. Then I bought my first house, a real fixer upper. With no money, I had to do all my own auto and house work.

I am also into audio equipment and wanted to try building my own speakers. So, I borrowed the Craftsman tablesaw from work and built a set. Not too long afterward, the office moved and didn't have a place for the tools. So, they gave me the saw and a disc/belt sander. I watched some Norm and my wife and I had a kid which ended my motorcycle roadracing habby. A few years later the whole garage had transformed from my motorcycle racing shop to a woodshop. Eight or nine years later, my woodshop is in the basement with heaviest use in the winter. My garage is again used to satisfy my need for speed, this time with 4 wheels.

Jay

Re: How did you get started in woodworking?

#20

Re: How did you get started in woodworking?

David C. Lykins - guitardude - Dallas GA

>As a child I was always building and tinkering with things. Of course most of my earlier wood working was building balsa planes and gliders, I them move to control line gas models and scratch built several planes and gliders. My father (now a retired service engineer from CAT) always let me build or tinker with about any tool he had, even his Atlas metal lathe. Later in HS I built my own guitar amp head for electronics class and needed a speaker cabinet to go with it. So dad helped me build a exact replica of a Fender 2x12 cabinet to match the cabinet we built for the head. That was really my first experience at building entirely out of wood and having the priveledge to use some of my grandfathers antique wood planes.

I had also been playing guitar since the early 70s, and had always aspired to build my own guitar. So in the late 90s I built my firt electric guitar from parts I purchased at various guitar supply shops. One thing led to another and I started selling guitars and amps to purchase a jointer, couple of routers, bandsaw, various hand toos, planer and about $1000 in luthier tools. So far I've built three scratch built electric guitars and have several in different stages of completion, buy my shop has not been set up since about 2003. I'm totally self taught in my luthierie skills, and most of my wood working. Though I dearly love guitars and building them they are 100 times more time consuming and complex than turning items on the lathe as I have found out.

Re: How did you get started in woodworking?

#21

Re: How did you get started in woodworking?

Carol - now in NC Nebraska

>Oh-Oh. A lathe sneaked up on you, too?