Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

2x stock, where to get good stuff? Bucks Co., PA

Posts

2x stock, where to get good stuff? Bucks Co., PA

#1

2x stock, where to get good stuff? Bucks Co., PA

Craig Daymon

>I need to build some shop cabinets and I have a great set of plans from ShopNotes that uses 2x10x8 foot boards, MDF, hardboard and a little hard wood. The plans are simple and modular, so I can easily expand it to fit my needs. (ShopNotes issue #59)

Anyway, after spending the day traveling to all the big box locations, I couldn't find any 2x stock worth using. Plenty of knots, cracks and twists. None of it was Ponderosa Pine, which I think is what the Popular Woodworking guys used in constructing their workbench. So much for getting anything done on this "vacation".

So where do you find good 2x stock in this area? (Bucks/Montgomery County, PA.)

Thanks in advance,

Craig

Re: 2x stock, where to get good stuff? Bucks Co., PA

#2

JL

Re: Have you tried Woodfinder??  *LINK*

JL

>


Woodfinder

Re: 2x stock, where to get good stuff? Bucks Co., PA

#3

Re: 2x stock, where to get good stuff? Bucks Co.,

peter kolb

>Craig, Its a little out of your area but not too far. Willard Bros. in Trenton. If you are looking for cheap lumber I do not know where to send you. Peter in south central nj

Re: 2x stock, where to get good stuff? Bucks Co., PA

#4

Not sure exactly where in Bucks you are

Joanne Adler in Pt. Pleasant, PA

>In Doylestown is John Kirlew's sawmill (Bucks County Hardwoods, I think he's using for the name).

In Oxford Valley area is Mike Quinn.

On 611 near Ottsville is Wehrung's Specialty Woods.

There used to be a guy over in Frenchtown (I may be able to dig out the number).

Woodfinder should find anyone else.

Let me know if you need numbers for the ones I've listed.

Re: 2x stock, where to get good stuff? Bucks Co., PA

#5

Thanks and another question, what wood is good 2x?

Craig Daymon

>Thanks Joanne,

I'm in Jamison, just south of Almshouse off of York Road.

I was up near Wehrung's today picking up some rough 4/4 Ash from Heacock Lumber. Last time I visited Specialty Hardwoods, they charged me over $20 for about a pint of Anchor Seal. (I bought 5 gallons directly from the manufacturer for about $40.) Most of their lumber seemed to have similar prices. The regular Wehrung's box store seemed much more reasonable, though they don't stock exotics.

I'll try giving Bucks County Hardwoods a call tomorrow and if they have Saturday hours, I'll go check them out.

I guess the other question I have is what sort of 2x stock should I be looking for? Douglas Fir? Ponderosa Pine? It seems the stuff the big boxes stock is only good for covering with dry wall. (Or any use where it can't be seen.)

The magazines always make it seem like good 2x stock is easy to find.

Thanks again,

Craig

Re: 2x stock, where to get good stuff? Bucks Co., PA

#6

Re: Thanks and another question, what wood is good

Joanne Adler in Pt. Pleasant, PA

>Yeah, Wehrung's is expensive.

What kind of wood should you be looking for, you ask? Depends on how fancy you want your shop cabinets. Do those plans really need 2" thick stock? Or do they mean "2 x __" which actually measures less?

I'll send you John's numbers. He is there on Saturdays. Good idea to call to see what he has.

Re: 2x stock, where to get good stuff? Bucks Co., PA

#7

Re: Thanks and another question, what wood is good

Craig Daymon

>The plans call for Two-by stock, like 2x4 or 2x10. I just put the article in front of me and they are using Douglas Fir. They are cutting components from eight foot 2x10's (1.5"x9.25"x96" boards). So it's regular two-by measuring.

I guess the 3/4" thick stock used for door rails and stiles and for drawer components was intended to be Douglas Fir as well, but I bought the Ash from Heacock for that purpose.

I also don't intend to use the beadboard they use for the door panels, at least not cut at an angle. It looks nice, but wastes far more than I could justify on shop cabinets.

Thanks Joanne,

Craig

Re: 2x stock, where to get good stuff? Bucks Co., PA

#8

Hey Craig!!!

Dominic Greco in Richboro PA

>Craig,

Geez Buddy! Here I am living 4 miles from a sawmill and you don't drop you old buddy Dominic a line? Its not like I haven't told you about the place before!! :>)

Give me a yell. I have a local source for rough sawn Poplar (which is perfect for shop projects). I believe they have thicker stock hidden somewhere about the place. Then again you could always use rough sawn cherry, hickory, or walnut!

Later,

Dominic

Re: 2x stock, where to get good stuff? Bucks Co., PA

#9

Don't buy 8 footers.

Ray Thompson - Middletown,IN

>Get 16's, they generally come from bigger/better trees and usually you find straighter, clearer boards in the longer lengths.

Ray

Re: 2x stock, where to get good stuff? Bucks Co., PA

#10

Re: Hey Craig!!!

Joanne Adler in Pt. Pleasant, PA

>Oh yeah, I forgot to mention Bryan's Farm in Richboro. I am guessing that's who Dom means. He's right on 232 between Richboro and Penns Park.

Re: 2x stock, where to get good stuff? Bucks Co., PA

#11

Ellis Walentine

Give Tinsman a call

Ellis Walentine

>They're in Lumberville, PA, just north of New Hope a few miles. I've gotten heavy doug fir there in the past.

Tell them they ought to be in Woodfinder. :-)

Ellis Walentine

Re: 2x stock, where to get good stuff? Bucks Co., PA

#12

Same here...

John in New Mexico

>Just at HD, you can get much better 2x4's just by buying 10' instead of 8'. What we're getting here at the moment (10 footers) is from Canada, and is some kind of white wood like spruce. The 8's are all douglas fir and/or hemlock and noticably worse. If I go to the big wholesaler around here I can actually get local pine in the 2x10 and 2x12 size. Much nicer wood, but not as strong - so the books say - as douglas fir or hemlock. Ironically, that supplier has the worst 2x4's I've ever seen, so it pays to look around extensively if you want the "nice" wood.

Given your location, I'd just use poplar if I were you.

Re: 2x stock, where to get good stuff? Bucks Co., PA

#13

Re: Thanks and another question, what wood is good

wilbur

>"I guess the other question I have is what sort of 2x stock should I be looking for? Douglas Fir? Ponderosa Pine?"

As far as the big box stores are concerned, and also the local lumberyards that I've looked at, the type of wood that 2x material comes in pretty much depends on where you are. In NJ, it seems all the 2x material is Douglas Fir. I emailed Christopher Schwarz once as to where all that SYP 2x material is hiding -- apparently that's what they stock in the big box stores in Ohio. Once I stopped off in an orange Borg in Delaware, and they had hemlock fir 2x material.

So I think that it just depends on where you happen to be. Having said that, I just made a worktable out of Douglas fir 2x material, and it seems to be just fine.

Re: 2x stock, where to get good stuff? Bucks Co., PA

#14

Re: Hey Craig!!!

Craig Daymon

>Sorry Dom,

You're always posting about great wood finds on the turning side, but I didn't associate most of those with lumber yards and my chain saw needs an extension cord.

If Bryan's Farm was the one you were referring to, it probably won't work for me. Remember, I have that Jetta and since it is a twin cab, the beds awful short. (Has that funny bed cover hinged at the back window as well.) Unfortunately, that's the same reason I can't really consider Simmie for this project. When I get the lumber rack constructed (sometime after this project and a few turnings) I can rent a truck for a day and stock up.

I'll call Bryan's, but I suspect it probably won't work for me. It looks like Bucks County Lumber or Tinsman Brothers are my best bets.

I'm writing all these down and thanks again to everyone who's been posting.

Thanks,

Craig

Re: 2x stock, where to get good stuff? Bucks Co., PA

#15

You can't "consider Simmie" at all

Joanne Adler in Pt. Pleasant, PA

>Sadly, Simmie died a while ago. Most of his lumber was sold to Willard Brothers in Trenton.

Re: 2x stock, where to get good stuff? Bucks Co., PA

#16

Shhhhhhh!

Dominic Greco in Richboro PA

>Joanne,

And here I was trying to be all secretive and mysterious! :>)

Yeah, it's Bryan's Farm. It's not like there are ANY other saw mills 3 miles down the road from me! :>)

See ya around,

Dominic

Re: 2x stock, where to get good stuff? Bucks Co., PA

#17

Very sorry to hear that.

Craig Daymon

>