Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Workbench Magazine.

Posts

Workbench Magazine.

#1

Workbench Magazine.

Tom Pilsbury

>Dose anyone here subscribe to or read Workbench Magazine? One of the sellers on eBay has a 3 year sub. for about $15. Pretty good price, but just how much is about woodworking? I went to their website for a looksee and found much useful information for homeowners, so either way it looks like a worthwhile investment. Just curious about the woodworking aspect.

BTW: Their website provided me with an Ah-hah!

Did you know that a 2x4 "stud" is not 8 feet long but only 91.5 inches? (yeah, you guys probably did but it was a headslapping moment for me)

Re: Workbench Magazine.

#2

Re: If that's the accuracy of...

Al Stokka - Cambridge, Iowa

>If 91�" is the accuracy of information in Workbench I'd pass. 'Round here studs are 92 5/8".

Al

Re: Workbench Magazine.

#3

Re: Workbench Magazine.

Rob Stokes in North Vancouver

>I get it. I was starting to come up in quality a year or so ago so I re-upped my subscription. But it's headed down again over the last 4 issues (no projects, much effort on projects that attract attention at a grocery store checkout browsing section). My subscription has lapsed (or is about to) and it's staying that way.

Rob

Re: Workbench Magazine.

#4

Oops! 92 5/8 is correct.

Tom Pilsbury

>In the time it took for me to go from Workbench to WoodCentral I miscalculated by 1 1/8th inches. No wonder my projects are all messed up! (another headslap for me)

Re: Workbench Magazine.

#5

Re: Workbench Magazine.

Craig Daymon

>I suscribe. I think it's like all the other magazines, up and down in content. Sometimes the woodworking/shop projects they feature are better than the similar projects in their sister publications, Woodsmith and ShopNotes. If you are a woodworker and want to subscribe to a home improvement magazine, I think Workbench is a good choice. I think it is intended to be a home improvement magazine and not a woodworking magazine, but it does feature more woodworking and hands-on projects than most home improvement mags.

-Craig

Re: Workbench Magazine.

#6

For $15/3 years..

Joe Pack

>At $5/year, I think you would enjoy it and get your money's worth. Workbench is not a "woodworking" magazine, but it does do a pretty good job of covering a little bit of everything around the house. I don't subscribe any more, but used to. I generally skim through it when I hit the local library. At $5/year, I might reconsider. I do enjoy looking through it.

Re: Workbench Magazine.

#7

Re: Oops! 92 5/8 is correct.

Kevin Rabenaldt

>Actually, what is being described here is an 8' precut stud. A precut stud used with 1 bottom plate and 2 top plates yields a wall height of 8'-1" approximately. The extra inch is needed to place your drywall on ceiling (1/2 or 5/8 inch) and give room to place your drywall on your vertical wall and have a little space left at the bottom of your wall. Otherwise you would be cutting drywall to fit and that is not time efficent. Your lumber source may not carry a regular 8' 2x4 but they are available.

Kevin