Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Question: Rockwell/Delta 34-338 Table Saw

Posts

Question: Rockwell/Delta 34-338 Table Saw

#1

Question: Rockwell/Delta 34-338 Table Saw

nixonp

>Does anyone have an opinion on the Rockwell/Delta 34-338 Table Saw? There is one for sale in my neighborhood and I'm wondering if it is worth looking at.... I'm relatively new to woodworking but have several nice other tools but a small basic Ryobi Home Depot portable table saw and was thinking of upgrading....The saw is being sold by the daughter of an elderly gentleman who still has all his fingers and I guess she is insisting on him keeping them.... Is this saw worth having? Any idea of value for reasonable condition unit... I've not seen it yet....

Thanks for any advice/feedback on this unit!!!!!!!

Re: Question: Rockwell/Delta 34-338 Table Saw

#2

Re: Question: Rockwell/Delta 34-338 Table Saw

Kneale Brownson in sunny N. MI

>I've been operating a Rockwell 34-338 (commonly called a contractor saw) for more than 30 years. Since I got my cabinet saw with the bigger motor, I mostly use the contractor for crosscuts with sleds or miter bars because the other one has superior ripping capacity. It should be a big step up from the saw you're using now. I think I paid around $300 for mine in the early 1970s. I think I see them selling occasionally for $250 or so.

Re: Question: Rockwell/Delta 34-338 Table Saw

#3

Re: Question: Rockwell/Delta 34-338 Table Saw

Ted Wong

>Typical older style contractors saw. I had one for several years and it performed its duties well. Although in this day there are many more saws out there with more bells and whistles. I'm not sure what a used one would be priced at but in my day I purchased one new for around $500.00 or so and 4 years later was able to sell it used for the same price I paid for it. A slight loss when adjusted for inflation.

Re: Question: Rockwell/Delta 34-338 Table Saw

#4

Re: Question: Rockwell/Delta 34-338 Table Saw

Rod Peterson -- Ormond Beach

>Does it look like this?:


There's a three year old thread about it on Woodworking Online.com—mostly complimentary.

A variation of a garden variety Delta Contractors saw, looks like to me. Should do good work for you.

Rod

Re: Question: Rockwell/Delta 34-338 Table Saw

#5

Re: Question: Rockwell/Delta 34-338 Table Saw

nixonp

>Thanks to all for your answers.... very helpful.....

Paul

Re: Question: Rockwell/Delta 34-338 Table Saw

#6

Re: Question: Rockwell/Delta 34-338 Table Saw

Barry Irby

>I bought one new in about 1971 and still have it. I upgraded the motor to a 2 hp Dayton at 240 volts. . I paid about $350 for the saw and could not stand the idea of putting $400 Biesemeyer fence on a $350 saw, but when I heard (here) that Lowes had them for $80, I grabbed one But I used it with the factory fence on it until about a month ago. I have used the saw hard at times and it has done everything I asked of it. I would buy it again in a minute.

Re: Question: Rockwell/Delta 34-338 Table Saw

#7

Re: Question: Rockwell/Delta 34-338 Table Saw

Miles

>I have a Uk-built clone, bought from a similar estate sale, that looks very similar to the one pictured above in this thread. Works perfectly well, though the fundamental quality (accuracy, fit) is not really top notch. The fence is my biggest gripe. It's a lightweight aluminium extrusion, which is neither perfectly straight nor vertical-sided relative to the table. I had to screw a beech batten to it to give me a better option, and I'd love to change it for a better one. Not so easy over here. The fence 'head' is cast iron, and grips pretty well, but making a really good bar to mount on it, given the slightly irregular faces available, is not an easy task.

My saw was made my Naerok, which seems to have been a small, short lived firm now extinct. If I were upgrading, I'd go for the Jet Supersaw with a sliding table.

It does allow me to fit a dado head, too, in case I want the Tool Police to come calling. However, none of my criminal friends have been able to find one on the local black market. Harder to get than a gun or a pound of dynamite :-)

Anyone got a good idea for an aftermarket fence available in the UK?

Miles

CAmbridge.

Re: Question: Rockwell/Delta 34-338 Table Saw

#8

I bought one recently for $175

Don in Northern Arizona

>It had a 2HP Baldor motor which made the sale. The saw looked a little tired and after I tore it down, it turned out that the arbor bearings were shot on it. I am in the process of getting them replaced and hope to get the saw rehabbed by Christmas. Fortunately the motor is worth more than $175. I also have a Delta 34-440, the slightly later model. It has been a great saw for me. I would say if it looks like it was a mainly a hobbyist saw, isn't covered with rust, and the price is right, definitely go for it.

Don