Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Real Thin Kerf TS Blade?

Posts

Real Thin Kerf TS Blade?

#1

Real Thin Kerf TS Blade?

Tony - Memphis

>I have seen a real thin kerf ts blade somewhere, but I can't find it. Any ideas?

Thanks,

Tony

Re: Real Thin Kerf TS Blade?

#2

Re: Real Thin Kerf TS Blade?

Sawdust B Gone!

>Might want to look into this

Forrest WW10407080 10" SAW BLADE - 40T

Ultra thin kerf (5/64")

Requires dampener / stiffener 5/8" bore

$128.70

Re: Real Thin Kerf TS Blade?

#3

Re: Real Thin Kerf TS Blade?

Doug Reynolds in Seattle

>Freud makes an 1/16" blade in the 7 1/2 diameter (whatever size goes in a circular saw) for about $15. I got mine at Home Depot. May be in the tool section or the rental section. I learned about it at the Marc Adams school with Steve Latta who uses them making veneer.

Re: Real Thin Kerf TS Blade?

#4

Re: Real Thin Kerf TS Blade?

Paul Woolson

>How thin do you need? I've got access to 7-1/2" blades with .023" kerf. They are more of a slotting blade and not so much of a through cutting blade.

Freud Diablo makes/made a nice thin kerfed blade. The 7-1/2 blade had a .054 kerf if memory serves me correctly. But I'm not sure if they make the thin one any more.

Re: Real Thin Kerf TS Blade?

#5

Jim in Burlington Ont.

How thin

Jim in Burlington On

>They make super thin blades for cutting the kerf in finger boards? Otherwise I really like CMT General thin kerf blade.

Re: Real Thin Kerf TS Blade?

#6

Thanks!

Tony - Memphis

>