Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

starting a woodworking business

Posts

starting a woodworking business

#1

starting a woodworking business

Chris S

>I've been working as a cabinetmaker for a few years and have decided to go on my own. Can you guys offer any advice getting started or what to watch out for (unforeseen expenses etc.)? How you market yourself.

Thanks

Re: starting a woodworking business

#2

Re: starting a woodworking business

Jim Dillon

>Chris,

While I can't offer any credible suggestions for working in the "real world", you might scroll down the message board to a post by James Watriss called "Making A Name..." where there is some excellent advice by experienced woodworkers who are in the business. Best of luck.

Jim

Re: starting a woodworking business

#3

Re: starting a woodworking business

David G. Sparks

>I like the book " Working at Woodworking" by Jim Tolpin. It will answer a lot of questions for you. I wish you luck!

Re: starting a woodworking business

#4

Re: starting a woodworking business

Dick Coers

>Rule #1 Make sure your spouse has a good job with family benefits.

#2 You will spend nearly as much time running the business as woodworking. Phone calls, material runs, estimates, walk-in customers, tax man, etc...........

#3 Plan on working 1/2 days as a business owner. (That's 12 hours)

#4 The last vacation you had will have been your last one!

#5 Residential customers always want you to come out for a sales call after they get off work. See rule #3.

#6 When you get to the end of the year with what seems like a really nice profit, don't forget that April 15th will erase most of that.

#7 Get a signed contract and a down payment before you ever start any job. No matter how small.

#8 Probably should be #1 but, DON'T BE AFRAID TO SAY NO TO A JOB. Cutting your estimate or low balling a bid to get work NEVER works out!

#9 Word of mouth is your very best sales tool. An upset customer will tell lots of people they didn't like you.

#10 You will now have a different boss with every job. You are the business owner, not the boss.

#11 Well not just a top 10 I guess, You will never be more proud of telling anyone what you do for a living. I ran my shop for 8 years and despite all the headaches, it is still what I am most proud of telling people what I did for a living. Best of luck to you!!!!!!! Ask any questions you want. I did commercial and residential furniture before I shut down the shop for a woodworking magazine job, would have guessed that was only going to last for 3 years. Don't get me started on hiring employees. The first couple of those make more money than you do. Make sure you have a few months of backlog before pulling the trigger unless you really have rule #1 covered.

Re: starting a woodworking business

#5

Housing Market is Falling- refer rule 1

Kirk D.

>

Re: starting a woodworking business

#6

Re: starting a woodworking business

Ken Oakley-Sunny St. Cloud, Fla.

>Rule # 1-making sure your wife or other significant other is able to support you and them is absolutely required.

Re: starting a woodworking business

#7

Sounds like the man..............

Basil

>.......has been there, done that for real. I couldn't have said it any better myself.

Re: starting a woodworking business

#8

Re: starting a woodworking business

Marym

>Watch your pricing! If you cost out a job, and think you should charge 5k, make it 6k or more, as you will probably underbid.

Underbidding is the worst feeling when you find out you were too low.

No reason to work for any less than you can. If you do very good work, you should be able to get very good prices for your work.

If you think you can do a job in a week, charge based on a week and a half, cause it will probably take that long. For every week you work in the shop, you will end up spending at least another 1/2 a day or more doing other general administrative tasks that need to be accounted for.

Good luck!

Re: starting a woodworking business

#10

Re: starting a woodworking business

Dennis P. Skea

>Get yourself a good tax accountant. Have a consultation meeting with him/her to discuss your business structure and various expenditures. CPA's are usuaslly too expensive for a small businessman; I would suggest an Enrolled Agent. They tend to be more reasonably priced, and usually focus on the tax aspects of a business, including licensing requirements, etc. which is what you need in the beginning. You can find one near you by checking the National Society of Enrolled Agents at www.naea.org.

Good Luck.

Dennis P. Skea

Re: starting a woodworking business

#11

Re: starting a woodworking business

tom mooty

>the best advice i think you could have is contact your local score chapter which gives free and in strict confidence. I am a member of score which is made up of retired businee men from all types and backgrounds who delight in helping people who want yo start a business tom

Re: starting a woodworking business

#12

What happened to Puzzlecraft?

BobS

>Is the company gone does it have a different name? The website just takes you to a redirecting site.

Bob

Re: starting a woodworking business

#13

Re: Puzzlecraft went out of business

Larry Clinton

>in 2006. Below is the message Steve Strickland posted. You can search the message archives for more info.

Subject: My woodworking career is in limbo

Posted By: Steve Strickland slsbassman@hotmail.com

Date: Friday, 23 June 2006, at 1:14 p.m.

I was forced to close my company, Puzzlecraft, after the Iraq invasion killed my European sales. I lasted another 2+ years but decided I was tired of losing money while working 80 hrs. per week. I did not declare bankruptcy, I simple shut everything down. I've already sold all the equipment and am getting my building ready to lease out.

I'm not sure what I'll do next. A couple of outfits want me to run their e-commerce websites but I think I'd be a lot happier in woodworking. So, what does one do to get a job in woodworking? I haven't been in the job market for many, many years.

Steve

Re: starting a woodworking business

#14

The inside story of Puzzlecraft

Michael Dresdner

>Want to know more about what happened to Puzzlecraft?

An in depth interview with Steve Strickland about the rise and run of his company, including what happened and why, will appear in the Today's Woodworker segment of issue 183 of the Woodworker's Journal eZine, a free online magazine. Issue 183 comes out Tuesday, October 9th. If you are not a subscriber you can sign up for free at www.woodworkersjournal.com Just scroll down to the bottom of the page where they will ask for your first name, last name, and email address. It is that simple.

It was my honor to interview Steve and write the piece, and it is a fascinating story.

Re: starting a woodworking business

#15

Re: starting a woodworking business

Jack Russell

>Chris,

Amen to Tom Mooty's advice! Right out of the box, go to the web at www.score.org and find your nearest chapter. The services are free. As a woodworker and management consultant to small artisanal businesses I have noted that artists are often very uncomfortable with the "business of the business." As a result the business end gets neglected in favor of the fun stuff. Hence the term starving artist! Understanding your costs, pricing to recover your materials, labor AND overhead costs is crucial to success. Failure to recover overhead costs ends up valuing your skilled labor at less than minimum wage if you are not careful. A SCORE volunteer can instruct you about running the business, developing your own record keeping for control, pricing, and marketing your products.

I too, wish you luck but I have always defined "luck" as the the intersection where preparation meets opportunity. You no doubt have prepared on the craft side. But you need to really dovetail (sorry!) the business side too before you are fully prepared to meet that opportunity.

Jack

Re: starting a woodworking business

#16

Re: starting a woodworking business

Larry Clinton

>Jack, as a retired Engineer from a manufacturing facility, I appreciate the truth in what you are telling people wanting to start their own business. I have been responsible in the past for working at pricing manufactured parts. It is fairly easy to price both material and direct labor. IE: you can measure the lumber, finishing material and hours you worked. However, the most neglected and error prone cost is the "overhead". Overhead includes not only the cost of your equipment (amortized over the life of the equipment). Maintenance of that equipment, tooling required (blades, cutters and bits wear out), and cost of heating / cooling the shop, but also - Cost of sales, ads, attending shows etc., obtaining material, (It just doesn't appear in the shop when you need it). Holiday pay (your not going to work on Christmas, New Years eve, Thanksgiving etc. are you), vacation pay - you still have to eat when you take SHMBO on a yearly week or two outing to see her folks don't you? Insurance - Medical, shop coverage, liability, vehicle, have to be paid for - the shop rate must include these items. In our plant these items averaged over 50% of the direct labor. In other words for every $20 we paid in labor it cost $10 for the overhead to pay the "extras" for the labor and pay for a building, equipment and utilities. We did start up a electronic department once where the Overhead was over 1000% (It cost $100 for every $10 in direct labor to run the department. I would expect a woodworker to have an overhead of at least %50 and maybe %100 to %200 of his/her direct labor costs. I would determine what the hourly overhead is by first determining all the costs associated with running the business for a year, then dividing those costs by the number of direct labor hours you expect to have working on paying projects in that year. If you expect to have 1 week of vacation time and 10 holidays (almost all factories and other employers give at least 10) That means you have only 49 weeks @ 40 hrs/ week or 1960 hrs a year to pay all your expenses. That is provided you have commissions you are working on continuously (which is really hard to do starting out).

Granted you can work on Saturdays and more than 8 hours a day (most people do in their own business just to make it). But some hours are not paid for - when your quoting and don't get the job - or just beating the bushes for work.

Re: starting a woodworking business

#17

A few more things

John Cotten

>As stated follow the rules.

A couple of other things. If married, make sure you spouse or SO if not married supports your decision. It affects them maybe more than it does you. On the back side is you are going to be working 10 to 16 hours a day, 6 and sometimes 7 days a week. This past Sunday was the first day I have taken off a full day in 10 weeks.

Be deciplined about being in business. I recently moved my shop to another city about 15 miles away. Because of needing to work on site at two different job sites for the past three weeks, I haven't been at my cabinet shop much for the past two weeks. Fortunately for me I co-op my space with another cabinet maker who can let people know that I am working and not laying not showing up. It is easy to do.

If you are working at home, every cabinet maker I know who does will tell you it is easy to burn a lot of time at the computer, or sit down to watch the news at lunch and wake up a hour and half later having fallen asleep. You work for yourself, but you need to remember you don't get paid if you don't work. Right now I loose between 1-1/2 to 3 hours a day meeting with clients on various jobs or driving. Starting early doesn't always solve problems because many of the persons you meet with on the commerical side of the business, suppliers, and sales reps have a life too, and the time you are alloted is from 8AM to 6PM if you are lucky.

Also, consider running your business as a DBA. My business advisor gave me the advise of not incorporating or running as an LLC till I have too. It will make a bid difference come tax time. Get your tax number, your workmans comp (even if you don't have employees, get a small WC policy, the day you have friend step in and decide to pay him a few dollars, he gets hurt it will pay for itself. It will even pay if YOU get hurt. Also don't forget insurance, renter/property and a general liability policy. My GL covers my installs also.

Good luck.

My favorite bumper sticker:

My Boss talks to himself too much and is an idiot....did I mention I work for myself.

Re: starting a woodworking business

#18

Brutal but every word true !

SteveM

>Did you mention for the first couple years you're broke ?

Re: starting a woodworking business

#19

Re: Brutal but every word true !

Dick Coers

>And if you work those 16 hour days, 10 days in a row, for lots of years, you're broke. Yup, carpal tunnel, arthritic hands, bad hip joint,and chronic fatigue or crapped out thyroid (you guess, my doctor can't). Take it from a guy that is only 55 in calendar years, but medically a lot older. Take more days off!!!!!!!!!!!!!! All that wear and tear will catch up with you.

Re: starting a woodworking business

#20

Re: The inside story of Puzzlecraft

charlie belden

>I recall a long and interesting thread in rec.woodworking between he and Ed Bennett (TS-Aligner) on whether or not precision set up equiptment was necessary in order to make parts with precise dimensions. Ed, coming from a machinist's perspective and Jim coming from a "I can figure out a way" position made for a lively and informative exchange.

His use of skateboard wheels and bearings was one of his slick shop made solutions to a problem he solved.

Hope he finds some way to stay in woodworking as he has an affinity for it.

charlie b

Re: starting a woodworking business

#21

Both of these are great information

Stephen Kirk in Quakertown, PA

>I'm still a cubicle clone hoping to be an independent furniture maker (or call it straight woodworker - I don't want to pigeon hole myself) someday. I recently started taking Project Management classes at work (paid by them, can't complain). I was hoping (and found it to be correct), that project management, risk management, scheduling, cost control, communication, etc are pretty much the same for a woodworker as for someone managing a major business project (IT, HR, manufacturing, etc). I should still manage my projects (have a plan, document the plan), price my work, schedule how I'm going to meet the plan, communicate effective with the clients, correctly set expectations, understand what my risks are (and if high enough, consider not doing the project).

So, this is just to say that there are many people who think "I can build furniture, so I'll make money at it". Some are good and succeed, but many others overlook the business aspect of running a business. If you are working alone you are the developer, project manager, line worker, quality tester, procurement, financial, etc. Knowing how all these work is pretty helpful.

Re: starting a woodworking business

#22

Re: starting a woodworking business

Tom Heilpern

>There is nothing above that I have read that does not fit into a business plan a necessary ingredient in starting a business. In most areas of the country there are organizations that will help an individual interested in starting a business, writing a business plan or analyzing the market. Check your phone book for the SCORE Association office or the Small Business Developement Center in your area. If you want email assistance go to www.score.org where you can get start-up assistance.