Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

finished bench

Posts

finished bench

#1

finished bench

David W

>Here is a picture of the workbench I started in Lon Schleining's class at Marc Adams earlier this summer. It was more of a challenge than I had expected as Lon did not intend the class to be a paint by numbers project. I was able to complete the bench top while in class and that would have been singificantly more difficult without the assistance of other classmates during glue-up and the use of Marc's wide belt sander and jigs for routing the dogholes. There were quite a few people who attended this year's class who had unfifnished benches from the class last offered 2 or 3 years ago.


img

Re: finished bench

#2

Awesome!

Mike Farinella

>Beautiful work David.

Re: finished bench

#3

Re: You did well!

Glenn Madsen near San Francisco

>There was a group of folks from the local Adult Ed woodworking program that got together and built classic Tage Frid style workbenches this summer. 9 benches, a budgeted 8 days, and 16 much longer than planned days later, success!

I doubt any builder really knows how long it's going to take the first time or two through the process. Learning takes a minute, and Murphy always seems to show up, too. But that's a lot of the fun involved.

Re: finished bench

#4

Wow! You done good.

Eddie Pacheco: San Jose, Ca.

>I'd have to say that you certainly got your moneys worth from that class. That is a beautiful workbench. I like your shop too.

Re: finished bench

#5

Re: finished bench

GolfSteve in Calgary

>Nice looking bench. You'll never regret the time you spend building it.

Re: finished bench

#6

Re: finished bench

DizD

>Nice. I finished one a year or so ago based on this plan and it has been a joy to have and use. I used LV bench bolts on the strechers cause I figured sometime someone would have to move it. I also use 4 of the large "slider pads" under each foot. It doesn't move under normal use, but I can move it away from the wall when needed without grinding up the wood on the feet.