Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Making a name... question for the professionals

Posts

Making a name... question for the professionals

#1

Making a name... question for the professionals

James Watriss

>So, here I am, graduated a nice school, (almost) have my shop all set up, just about ready to work, and the funniest thing snuck up on me. I have a few projects lined up, some on spec, some for people, but I still have to ask...

For those of you who build furniture and other things for a living,

How have some of you gotten your name out there? Are websites really helpful in generating business, or do they blend into the crowd?

It's nice to envision a shop where I build custom pieces for a living, but the whole "getting the attention of the customer," thing has me baffled. On my budget, I don't think I can afford ads in magazines yet, so I'm curious to hear how other people have tackled this issue.

So many woodworkers I know, and so many other workers, for that matter, run for their tools when confronted with the whole business side of things, and I'm trying not to run into that trap.

Re: Making a name... question for the professionals

#2

Re: Making a name... question for the professional

Carol - now in NC Nebraska

>Donate a spec piece to a local charity, maybe for a fund raising event, making sure you get good publicity. Not for your donation, but for the exquisite design, flawless craftsmanship, tasteful selection of wood and other enhancing media, and unique application with regard to usage, stressing your willingness to collaborate with the customer so an heirloom is created that can be proudly handed on to future generations. You will have to write it yourself. No one else understands as well as you do. If you can't articulate it, you can't sell it.

Get the idea?

Re: Making a name... question for the professionals

#3

Re: Making a name... question for the professional

ted Wong

>Business acumen is the key to success. You can be a a great woodworker and a lousy businessman and your chances of success are limited. On the other hand there are many meiocre woodworkers out there that are great at the business side of things and they lead comfortable lives. I'm not saying you can't be great at both just that good business practice is all important to your success.

Re: Making a name... question for the professionals

#4

Re: Making a name... question for the professional *LINK*

Ron Hildreth, Alta, Iowa

>James,

Since my own business is only just short of being two years old, I'm still somewhat in the learning stages of getting my business known. I've learned quick that you have to crawl before you can walk. I'm very critical of any advertising, closely researching any form of it before doing it, and most of what I've invested into so far has been for the local market (the crawl part). There has been about six things that have paid off big time for me;

1) Signs on my truck. Make sure they are simple and easy to read even at 60mph! Include your website addy if you have one! Mine are magnetic and cost me $75 for the pair

2)Advertise on your local access TV channel. Mine costs me $25 per month. Great thing about this is to have them run the ad for six months, then drop it for a few months, then do it agian. If done right, people will remember it.

3) Make a few things for a few friends that want you to build something for them. Charge them for materials only, but the attached string is they can't tell anyone what it cost them, but they have to tell everyone who built it. Surprising how fast word of mouth travels, especially if your workmanship is 1st class!

4) A website done professionally. Not something that has to be done right away, but has paid off for me. Might be because I advertise it extensively. Shop around carefully here, and I'm a true believer that getting it designed locally will be your cheapest way to go.

5) Business cards. I give mine out and I'm not shy about it!

One last thing I've done, that kills two birds with one stone- I bought a woodburning tool with my shops logo. Every now and then I'll cut up some scrap oak, each piece just big enough to burn My logo into, drill a small hole into one corner, thread a chain through it, and I now have a memento to give to current or prospective customers. It's a lot cheaper than buying those ballpoint pens with your name or logo on them that cost you $300 for a gross and quit working in your customers hand. That's a great way to advertise- NOT!!!!

Be careful of the phone calls that promise to "put you on the business map", wanting to sign you up to advertise in the yellow pages. They end up being yellow pages that are only sent out to other businesses. What good does that do, other than put you on their calling lists!

Your mileage may vary, depending on the population of your area. I live in a small northwestern Iowa farming community.

Hope some of this helps!

Ron in Iowa


RK Woodworking

Re: Making a name... question for the professionals

#5

Re: Making a name... question for the professional

SteveM

>Shows are good but can get pricey. I do them going in with the idea that if I don't make any sales at least I got a couple hundered business cards out there. For every hundered cards you'll hear back from ten. Out of those about three sales. But you get seen.

Best I've found is to weasel your way into small, specialty shops with good managers. Go in on consignment for stupid low prices. After awhile, when folks see your stuff in other folks houses and offices you start sneaking the prices up a bit at a time. After a couple years of loosing money on it it starts paying for itself. Another year and you can quit your "real " job. Still another year and you'll be happy that you did ! Just my pathetic story but it worked . . . so far so good.

Re: Making a name... question for the professionals

#6

Re: Making a name... question for the professional

Steven Pollack in Chicago

>I highly recommend reading the e-Myth. It will set your business thinking straight.

Steve

Re: Making a name... question for the professionals

#7

Re: Making a name... question for the professional

Keith Newton

>I agree with both Ted and Carol, and would like to add that you need to keep a good portfolio of all of your work, especially that which you are most proud of.

If you can afford to make a few things that show your talent, then enter them into juried shows, this will put your work in front of a wide audience.

Re: Making a name... question for the professionals

#8

Re: Making a name... question for the professional

Bill Grumbine (Kutztown PA)

>James, I have been at this since 1993. A friend of mine also started within a couple of months of my start date. He started out with a large expensive shop, advertising in the yellow pages, so on and so forth, and needed to make $1500/month just to pay his regular overhead. He went out of business - twice. I started in my basement, went by word of mouth, and kept it low and slow with the overhead. I eventually moved to a larger shop down the street, and finally, found a place where I could have a decent sized shop on my own property.

Word of mouth kept me busy for a long time, and it still does today. I spent a lot of time, and still do, on the various internet forums, answering and asking questions, participating as a regular guy. My business took a turn in that I started teaching, and that has been a huge boost, but even without that, word of mouth is the best advertising. It is cheap, and it is effective. The other things mentioned in the other responses to your question to gain some visibility will help too. BUT, beware the people who want to sell you advertising on phone book covers, the radio, etc. It is a money hole from which people like us almost never emerge.

You do not want lots of customers, you want the right customers. For years I had to fend off people who wanted me to build things they saw at Walmart. They thought that because I was a one man shop, I could do this stuff for next to nothing. But there are plenty of people out there who will know quality and are not afraid to pay for it. That is the group you want to cultivate if you are going to do custom work.

The internet is good, but it is limited. Getting involved in a local guild, and getting to know other people in the trades is good networking. People will refer others to you if they know about you and like your work, and do not do it themselves. Carpenters who build million dollar houses are not interested in making tables for those houses, but they like to have someone to whom they can refer when they are asked. Of course, this is word of mouth from a different angle!

Above all, do good work and take good care of your customers. There is that word of mouth thing again, but it works. I have more work that I can keep up with right now, and the only paid advertising I ever do is for my DVDs, which is pretty much a separate part of the business.

As to the web page stuff, it is the cheapest portfolio you can have, and the easiest for people to access. Even if you never sell a piece directly over the web, having a page means you are "with it", and it gives people a way to look at your work from the privacy and convenience of their own home. My website is my biggest expense for advertising, excepting the DVD stuff, and it costs me a few hundred dollars a year. That doesn't include time for maintenance, but that is part of running a business. It does include my secure ordering site too, although prices for that have gone up over the years. You may not need that unless you make production items that are in stock and can be shipped. It is a lot less than even one magazine ad, that is for sure!

Good luck with it!

Bill