Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Anybody bought a Grizzly G0634 yet?

Posts

Anybody bought a Grizzly G0634 yet?

#1

Anybody bought a Grizzly G0634 yet?

HC Sakman

>OK, let's try this one more time... Have anybody bought the Grizzly G0634 yet? If the answer is yes, how is it? Any major drawbacks? It seems like planer to jointer switch requires planer bed to be moved lower. I'd like to know if there's anything else.

Thank you in advance.

Chico...

Re: Anybody bought a Grizzly G0634 yet?

#2

I can't believe this...!

HC Sakman

>Nobody here has this machine??? I guess it'll be my duty to write a review.

Chico...

Re: Anybody bought a Grizzly G0634 yet?

#3

Re: It has not been out long Chico.

Larry Clinton At Frankfort (Central)., Indiana

>Had it been out a year ago, I probably would have bought one. I have the Grizzly 8" joiner with spiral head (Grizzly), and the Yorkcraft 20" planer with the Byrd head. I would have bought the 12" Grizzly, saved about $1200 and had a 12 joiner. I could have used the money to buy a Performax for the (very little) wide stuff I now put through the planer. Usually that is glued up panels anyway. I will say I can see very little, if any, difference in the performance of the Grizzly segmented carbide spiral cutterhead and the Byrd. Both do an exceptional job on highly figured wood. I have fed some samples through the planer and joiner CROSSGRAIN - believe it or not they came out pretty darn good.

Re: Anybody bought a Grizzly G0634 yet?

#4

Re: Anybody bought a Grizzly G0634 yet?

Thomas S Stockton

>Chico,

I don't find any reviews on the web at all for this machine. The manual is availble for download on their site, but you've probably done this already. Try calling there customer service number they used to be real good about giving names and numbers of people who have a particular machine.

By the way the domino is great, thanks for the advice

Tom

Re: Anybody bought a Grizzly G0634 yet?

#5

Re: Anybody bought a Grizzly G0634 yet?

Bartee ( Metro Atlanta )

>Chico,

I do not have one but, I just installed a G0593 8" spiral head Grizz.

I am not sure I would want to give up the length of the input and output beds on the Jointer. I think these are essential to the jointing process.

Also on my initial tests I really like the spiral cutters. I have never been any good at installing jointer cutters and this just eliminates the problem. Also any cutter damage can be solved by replacing the bad cutter. Actually each cutter has 4 cutting edges so you can just rotate them.

Re: Anybody bought a Grizzly G0634 yet?

#6

Nope but I tried to look at them in May

Forrest Addy

>Nope but I tried to look at them in May when I went up to Bellingham to the Grzzly showroom. They didn't have any because they weren't due out until July or something. Whatta pain. Get the catalog in winter and it has stuff in it (vapor ware in iron? Iron ware? Vapor iron?) that wan't be on the market til Fall and there's not even a word on the time line. You assume from the print that's it's in current production.

There's grumbles about short jointer tables. They're easy to extend in metal or wood. Add some suitable brackets to the ends of the jointer tables and install some home brew extentions. TThe could be either metal or wood - or rollers for that matter. Make provision for vertical adjustment for flush, alignmnet, and for tooless installation and removal to save space. In the case of the Griz 06-whatever this could take the form of table saw extentions installed short end to the jointer table. It would take some fairly precise metalwork but it could be done. Let's see. The two saw tables are 27" each plus the existing length of 64" that's almost 10 feet. Maybe overkill, huh? But it's a thought.

Re: Anybody bought a Grizzly G0634 yet?

#7

Thank you guys..

HC Sakman

>I have a bryd shelix head in my DJ-20 as well as General 130. I think straight blades are thing of the past. Both work great. General 130 planer is so quiet, you can carry on a conversation while it's planing 13" wide 12' long teak board. I want the Grizzly combo because it's small, yet 12" wide. Felder sells reasonable bed extentions in either 12" aluminium or 6" cast iron, which both can be attached to any machine with flat edged cast iron table. A great way to extend any cast iron surface.

My question was about the function changes and other possible annoying issues during the use of this particular machine. I guess I'll have to find out myself! ;-)

Tom, glad you like the Domino. It's great isn't it?

Thank you all.

Chico...