Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Can you top this? OT?

Posts

Can you top this? OT?

#1

Can you top this? OT?

Justin Szeliga

>I was ripping some oak for a random width floor this week & my table saw refused to start up again at one point. I went through the switch, the onboard circuit breaker (Delta Contractor Saw w/integral motor) then pulled the motor from the carriage & opened up the brush covers & found the brushes full of sawdust. Cleaned that out, but ruined one of the brush covers in the process. A trip out to find a replacement that day found only 1 item at a big box, a 3/4-27 threaded faucet aerator. Not wanting to replace the plastic cover w/ a conductive hole I got a cork, trimmed it to force fit, screwed it in w/a chisel, & secured it w/gaffers tape. I then finished ripping the oak. The craziest fixed I've ever pulled off yet, anybody got a wilder one than that?

Peace

Justin

Re: Can you top this? OT?

#2

Cork

George@Colonel's Workshop-Havertown PA

>Good Afternoon Justin

Aside from keeping fish hooks quiet, and wine safely in place in the bottle, I haven't dealt much with cork. I recall breaking or losing a threaded cap to the upper portion of a hand drill and using a fishing cork to plug the bit storage cylindar. I screwed the cork against the threads and they acted as a die. Sixty years later, I still have the drill and the threaded cork.

George

Re: Can you top this? OT?

#3

Re: Can you top this? OT?

Edward inVancouver

>2000 Astro cargo van,had a minor accident and the right tail light popped out, housing was fine, but the little tab for the screw to hold it in place was mashed up, needed that screw to keep the whole taillight assembly in place. What did I do? Got a spring loaded butterfly dry wall anchor and popped it in, snugged it up tight, and nobody knows the difference--until you have to remove the tail light to replace a bulb...

Also had trouble with the side mirrors, a big truck brushes against my mirror and it slaps back, and the mirror pops out and smashes. A new mirror with a cheap plastic back at the dealer costs $50--for a piece of glass and a piece of plastic. Replaced it twice over 4 years and the last time I swore I'd never replace it again. I epoxied twine on the back of the mirror and expoxied the other end to the mirror housing. The next time the mirror hosing slaps back and the mirror pops out, the strings will catch the mirror before it can fall down and get damaged. Kinda like mittens on strings, but no one sees the expoxied twine, and I don't have to replace the mirror again (I hope....)

Re: Can you top this? OT?

#4

Re: Can you top this? OT?

Howard Norman

>After recently pricing body parts for my Honda at the dealer I can appreciate your ingenuity.

Howard