Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Shellac, How amny coats?

Posts

Shellac, How amny coats?

#1

Shellac, How amny coats?

Barry Irby

>I am new to shellac.

I have two coats brushed on my Heart Pine Huntboard. How many coats do I need? (I am using Zinzer Seal coat, told you I was new to this.)

I was thinking of putting lacquer over it, but I am not sure. Maybe just the top to protect it form water and alcohol?

How long must I wait before applying the lacquer if I do?

Re: Shellac, How amny coats?

#2

Re: Shellac, How many coats?

Glenn Madsen near San Francisco

>Have you 'cut' the shellac? If so, you're likely about 1/3 of the way there. But it's up to you, really. When it looks right, you can stop.

Seal coat is fine. It's dewaxed, and a little lighter color and cut, but good shellac. I've used it on a number of projects. It's available at a lot of places.

I'm not a lacquer user, so I have no opinion on the overcoat. I did one TV stand for my youngest son, brushed Deft, and disliked the results enough to give away the last of that batch of finish. I disliked the smells, too. Several coats of wiped on 'regular' shellac, follwed by furniture wax, would be fine in our home. But we don't use alcohol, so that's not a problem for us. What I read, though, is that strong alcohol in a drink would STILL need to sit overnight to cause a problem. And repair would be pretty simple thereafter.

Take pictures?

Re: Shellac, How amny coats?

#3

Re: Shellac, How many coats?

Barry Irby

>Thanks, I am not an alcohol user either, so I doubt the piece would be exposed in my lifetime, but I did not know how big the risk was.

Can I spray Seal coat? I have a spray gun but have not used it in many years because I don't have a spray booth. Might be time to get it out again.

Re: Shellac, How amny coats?

#4

Re: Shellac, How amny coats?

George@Colonel's Workshop-Havertown PA

>Good Afternoon Barry,

Shellac disolves into itself and two applications become a single coat. If I am using it strictly as a sealer, say between stain/gels/poly I generally give it two applications of Sealcoat, and scuff very lightly after each. I like to apply shellac with a natural bristle brush, or wipe it on with a soft cloth. It will become very beautiful with each successive application as it builds. Should runs or holidays happen, I rub it out with 4/0 steel wool and oil or 320 grit/oil/naptha, wipe down with more naptha, and switch to a clean dry cloth. I have also used rottenstone and oil with a leather pad. Then wipe on another "coat". Shellac dries fast. It is an evaporized finish. I nearly always let it sit a day before proceding to top coat it with a final finish of poly or brushing lacquer. Others get good results with a shorter time interval. However, with my luck, being conservative isn't such a bad practise.

George

Re: Shellac, How amny coats?

#5

Re: Shellac, How many coats?

David Yoho

>I like applying SealCoat with a piece of the white Scotch Brite-type pad. After a few coats, I like to wrap a piece of T-shirt material around the pad and wipe it on. The pad acts like a sponge and holds the shellac while the outer cloth provides a smooth applicator. You definitely can spray SealCoat too.

When I use shellac (SealCoat) on a project and need a final protective coat, say for a tabletop, I like Waterlox, which I also wipe on.

David

Re: Shellac, How amny coats?

#6

Re: Shellac, How many coats?

Barry Irby

>David, I assume the white Scotch Brite is really fine and soft or smooth. (Right?) Where do you get them? I have red and gray but no white. You are not talking about the Magic Eraser are you?

Re: Shellac, How amny coats?

#7

Re: Shellac, How amny coats?

Ken Platt (North Granby, CT)

>I use shellac on most of my projects, although I haven't tried Seal Coat yet. I apply my shellac with a pad, which I make with a soft rag. I fold the corners in, then repeat, then hold it so that the bottom is balled up a bit, similar to the pad one makes for french pollishing. The idea of using a white pad is interesting, and I may try that.

Padding on shellac gives very thin coats, and I don't even try to count them. I just keep going until I like the amount of build.

Then, I use a white pad and some paste wax softened with mineral spirits and do a waxing and rubbing out at the same time. Gives a nice soft sheen that I like a lot.

I can't remember where I got my white pads, but a google search turned up a number of sources. I know I got them mail order as the home centers around here don't carry them.

Ken

Re: Shellac, How amny coats?

#8

Re: Shellac, How many coats?

Glenn Madsen near San Francisco

>I've sprayed shellac I mixed myself with a $45 Critter sprayer and a pancake compressor - not exactly high end stuff.

But then, why? Padding seems to work for me, and is quick, cheap, and cleanup is a breeze. Your choice, though. I understand the 'want to get this thing DONE!' mode.

There are credible reports of the $79 on sale HVLP sprayer from Rockler doing shellac just fine...

Re: Shellac, How amny coats?

#9

Re: Shellac, How many coats?

Glenn Madsen near San Francisco

>White, 0000, I get from Rockler about every three years. That's about as often as I need them. Hardware store only went to grey. Haven't checked with the auto supply fellows or paint stores.

Magic Eraser is something else at our house - a disposable cleaning sponge from Mr Clean, for bathrooms, etc.

Re: Shellac, How amny coats?

#10

Re: Shellac, How amny coats?

Dan Manturi

>I have used shellac on a couple of projects and like it a lot. I make my own out of flakes and use orange shellac on projects like oak and maple. I use it without staining the wood as the color is really a good enhancer to these woods. I make a between a 2 and 3 pound cut, pad it on with an old sport sock till it gets a little viscous feeling under the pad. It drys super fast. My last project I used perhaps 6 coats. I put on a coat a day - no need to wait that long but it just seems that the full visual effect of each coat is more visible to me after an overnight. I also turn the work so that I am never applying it to a vertical surface - runs easily and drys fast. Between coats it hit it with 4/0 steel wool or a white pad. Then 2 coats of Butchers wax Boston Polish, applied with 4/0 steel wool and hand buffed with cotton to finish.

Dan M.

Re: Shellac, How amny coats?

#11

Re: Shellac, How many coats?

David Yoho

>Barry, the white pads have no grit like the other colors. I get mine at Woodcraft.

David