Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Glue Bottle Problem

Posts

Glue Bottle Problem

#1

Glue Bottle Problem

Ed Grant

>I have one of those rubber glue bottles. There green in color and sell for about $30 in the catalogs. I've had it for a long time and really like it, but lately it keeps clogging up. The glue dries in or just below the tip in the bottle. The bottle apears to be air tight and I have tried several different caps but nothing helps. Has anyone run into this or have an idea?

Re: Glue Bottle Problem

#2

Ellis Walentine

Air's getting in somehow

Ellis Walentine

>I've used a lot of different kinds of glue bottles and, as long as air doesn't get to the glue, I don't have clogging problems. Sometimes this means I have to stick some kind of plastic cap over the nozzle. If the opening is small and round, a nail will often do the trick. If your glue is drying near the screw cap, it might be time to fair up the cap or use some kind of gasket on it.

If you've had that bottle for a long time, maybe the plastic/rubber/whatever is breaking down and air is sneaking in through the walls somehow. A new bottle might be the ticket.

Ellis