Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

By Request *LINK*

Posts

By Request *LINK*

#1

By Request *LINK*

Jim Shaver - Oakville, Ontario

>Hi,

I have received a few emails about my Shaker Sewing table asking for more images of the finished work to supplement my recent Shop Shot. I thought rather than send out individual email responses I would post them here.

Photo Sharing and Video Hosting at Photobucket

These were all made after the table had a few hours of sun light to darken the cherry up a bit. The table is complimented with quarter sawn beech as the drawer side wood. The finish is Danish oil and a final top coat of furniture wax.

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

The dovetails were all hand cut on the drawer but routed out for the three legs.

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

The pull through drawer hangs on top mounted runners attached to the drawer sides�

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Thanks for looking in,

Take care,

Jim


Shop Shot 842

Re: By Request *LINK*

#2

Re: By Request

Denis Ch�nard, Orl�ans, Ont.

>Looks good Jim...

How did the surgery go?

DC

Re: By Request *LINK*

#3

Tough.. How about "ENCORE" ?

HC Sakman

>Jim, this is hand cut dovetail tour de force mon ami!

Chico...

Re: By Request *LINK*

#4

Delayed, More Shop Time :-) *LINK*

Jim Shaver - Oakville, Ontario

>Hi Denis,

It was delayed. Balancing summer vacation schedules for the anaethetists and demands to support elective surgeries vs Life Critical surgeries such as mine led to the last minute delay. I am rescheduled for Sept 7 and I am fine, but it was hard to take on Monday when the schedule changed.

I posted on the Turning side some of my learnings from my research on Hip Resurfacing, follow the link.

Thanks for asking, I have recieved many many emails of support, Mike Brazeau and Mack Cameron have called, it's great to have kind friends around who want to reach out and say Hi, I feel blessed.

take care,

Jim


Story

Re: By Request *LINK*

#5

Re: Tough.. How about "ENCORE" ?

Jim Shaver - Oakville, Ontario

>Chico , Buddy..

:-)

Thank You my kind friend, not like the ones we made on your table saw last summer but very pleasing to enjoy just the same.

And you should have seen those Japanese Dove Tail Chisels in action, by the way, have you seen the new DT Japanese chisels at LV, up grades over their previous Japanese DT chisels!!

Take care,

Jim

Re: By Request *LINK*

#6

Re: Delayed, More Shop Time :-)

Denis Ch�nard, Orl�ans, Ont.

>Hey, if you get delayed one more time (not that you want that, I'm sure) you could come over to the Plane Orgy! Maybe Ed could give you a ride (not that I want to put him on the spot...)!

Best,

DC

Re: By Request *LINK*

#7

Shop Shots

Jennifer@Indy.USA

>Jim,

Thanks for the link to your Shop Shot and I just have to tell you that your shop shots are fantastic. For those of you who are not familiar with the Shop Shots page it is a wonderful place to really learn a lot, not only about the furniture that is made by WoodCentral members, but also about the makers themselves. They really are fun to read. Jim's tend to tell wonderful stories and take us on adventures that we might not normally get to see. I just wanted to say that I appreciate the time and effort that goes into writing these and putting them together. They are always a treat. Kudos to David Yoho as well for coordinating and getting them up for us all to enjoy.

Jen :)

Re: By Request *LINK*

#8

Re: Shop Shots - (long reply)

David Yoho

>Thanks, Jen! I very much appreciate your complimentary endorsement of Shop Shots as well as Jim's work.

I always post an announcement when new shots go up and was a bit taken back when there was no conversation on any of the recent four shots. I think there was a lot of content there that hopefully viewers would find useful in their own shops.

Jim has such a flair for telling a story and always sends in plenty of pictures documenting his projects. In fact, he sent me well more than the 19 images I used in his Shaker Sewing Table project. I find it difficult at times deciding which ones to use and which to leave out.

Over the past month I've been in contact vis email with Ellis and several "regular" posters to WC about spicing up Shop Shots. One goal of mine is to renew the anticipation level. We've had some good input through the emails that have been flying back and forth. Ellis is already working on one new idea that should generate more interest.

So, thanks for your help in reminding everyone about the great content in Shop Shots. If you see something in a Shop Shot you like, don't like, or just have a question about it, why not initiate a discussion right here on the messageboard. We're all here to learn from each other and I think we've been missing this opportunity when new shots go up.

David

Re: By Request *LINK*

#9

Re: Shop Shots - (long reply)

Jennifer@Indy.USA

>David, I've noticed a lack of discussion about the Shop Shots after they are posted as well. That was one of the reasons I posted this. I'm not sure if everyone understands what exactly they are? They are gems just waiting to be discovered! Admittedly I haven't seen/read them all, but I always think I'll do one on a turning project and then halfway through it I realize I didn't take any pictures of the process! I'm in the middle of a turned and embellished platter at the moment and I am documenting it's progress in photos so perhaps it will turn into one? I'm hoping. Keep up the great work and I'm looking forward to what you and Ellis have in the works. Your hard work doesn't go unnoticed!

Jen :)

Re: By Request *LINK*

#10

How about giving me an exclusive

David Yoho

>Jen, how about giving Shop Shots an exclusive premiere of your current project? What I mean by exclusive is let me post it in a Shop Shot before it makes it's way to the messageboards.

Just send in your images along with your write-up and I'll take it from there. Don't worry about reducing or dressing up the images.

Sure would be a dandy!

David