Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Door modification question....

Posts

Door modification question....

#1

JL

Door modification question....

JL

>Okay, a somewhat unusual request. The powers that be have requested that I modify several of the doors at church. This is so that there are no windowless doors (except for the bathroom doors). This is so that there is no thought that any improprieties may be taking place behind closed doors. (Sad to think that this is necessary in today's society.)

Anyway, what my thought is, is to make "window" units for said doors with trim all the way around. I would then cut rectangular holes through the doors and mount the window unit in the door. These are hefty hollow core doors with nice skins. I was figuring on making spacer blocks to fit between the skins and screw the window units into the spacers, through the trim.

Does this sound like a reasonable way to go? Any other suggestions?

Re: Door modification question....

#2

Re: Door modification question....

John E

>I can't give you any direct advice, other than to say it can be done. We did the same thing at my old church some years ago (unfortunately, for the same reason.) I didn't actually help with the installation though. so I can't give you any details. It appears that the windows they installed in the doors were made for such installation though. It was the thick glass with wires running through it so it's hard to break, and there is a frame on either side that screws together. Probably about 10 inches square. You might check to see if you can find a retrofit type of kit for this. As I said, we did it years ago, and I think it's a fairly common recommendation nowadays, so I bet somebody has covered the market. Good luck

John

Re: Door modification question....

#3

Re: Door modification question....

Dave Winters

>You can get kits to do this. One mfgr is Vision Lite. Call a local shop who prehangs doors. Or a glass company should be able to order for you. They come without the glass, and the frame is metal. Then you order the glass, probably single pane wired glass.

Any "window" in a door is called a light.

Email me with any other questions..

Re: Door modification question....

#4

Re: Door modification question....

Mark Nowicki

>Are you sure the doors are hollow core?

Mark