Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Old Delta jointer or new Grizz?

Posts

Old Delta jointer or new Grizz?

#1

Old Delta jointer or new Grizz?

Dan Manturi

>I currently have a 6" jet which is like new. Have heard of a decent shape Delta 37-315 longbed 8" jointer for maybe $500. I assume this is a circa 1975 built like a rock machine. I can get a new Grizzley for $100 more (with a drive up to Williamsport, PA). I recon that the Delta built back then is a much better deal even though used in an home shop (SOudns like the guy did woodworking on the side). I know nothing of this older machine, so owners info is helpful. I will not be using the machine heavily, but the 8" has advantages ofr the 6", and the net will be about $250, as I can sell teh jet for that easily.

Comments on the 37-315 welcome vs a new tool from a less prestigous vendor who sells servicable stuff.

Dan M.

Re: Old Delta jointer or new Grizz?

#2

Re: Old Delta jointer or new Grizz?

Thomas Skaggs, Foothills of Mount Level

>Jointers are generally simple machines. There aren't much in the way of bells and whistles that make newer ones any better. Check the bed of the Delta for flatness. If all that checks out and the motor and bearings sound fine then it's a darn good machine.

Tom

Re: Old Delta jointer or new Grizz?

#3

Bart Goldberg

Easy - Delta!!

Bart Goldberg

>

Re: Old Delta jointer or new Grizz?

#4

Re: Old Delta jointer or new Grizz?

George@Colonel's Workshop-Havertown PA

>Hello Dan,

I'd Go the Delta.

George

Re: Old Delta jointer or new Grizz?

#5

Ellis Walentine

Go for it, Dan

Ellis Walentine

>Wedge bed jointers haven't changed appreciably in fifty years or more. The principle is timeless, and the mechanism is adjustable. As someone mentioned, check the tables for flatness, individually. If they are not absolutley co-planar, you can adjust that out with shim stock in the ways.

[tangent]

Parallelogram-style jointers have gotten a lot of airplay in recent years, beginning with the DJ series from Delta. There's something of a tradeoff with that style of jointer. For one thing, they can be just as accurate as a well-aligned wedge bed jointer as long as the four points of articulation are carefully set up. The tradeoff is with the newfound freedom to lever the infeed table quickly. You really need to calibrate your depth scale if you want to go quickly to a particular setting. With the old-style, handwheel-driven raise/lower mechanisms of the traditional wedge-bed design, you could count turns to know just how much you were changing the setting. I greatly prefer the old screw feed, but I understand that a lot of people are happier with the lever feed.

[tangent off]

Sounds like a clear choice to me.

Ellis

Re: Old Delta jointer or new Grizz?

#6

OK - I'll go for it!

Dan Manturi

>Well, I am convinced. I sort of would like the security of a new piece of equipment, but the old Delta stuff is sort of legendary. I merely have never seen one or known an owner or user in the past.

I can likely get $300 or so for an almost new Jet 6" without too much trouble, so mu investment is sort of small.

Thanks.

Dan M

Re: Old Delta jointer or new Grizz?

#7

Second the Delta

Dominic Greco in Richboro PA

>From your description, it sounds similar to the old 8" Delta Jointer I bought off of Bill Grumbine when he upgraded to a MinMax. It was the best money I've ever spent! That hunk of old iron runs like a top and is easy as hell to adjust.

See ya around,

Dominic

Re: Old Delta jointer or new Grizz?

#8

Re: Old Delta jointer or new Grizz?

M. McNamee

>Get the Delta.

I have the 67 8" Delta from my Jr high shop class. You can image the abuse this machine took with over 35 years of use. When I got it I thought there was going to be lots of adjustments to the beds to get them lined up. NOPE. Beds were fine, just changed blades and motor. Works just fine.

Get the Delta.

Re: Old Delta jointer or new Grizz?

#9

Re: Old Delta jointer or new Grizz?

Dan Manturi

>Going to look at this tomorrow. I expect to buy it.

Thanks for the feedback.

Dan

Re: Old Delta jointer or new Grizz?

#10

I bought it..

Dan Manturi

>Just put a deposit on the jointer and need to make some more room. It'll be here in a week. Selling my almost new 6" Jet, which does a fine job, but the 8" is really what i wanted and now I have the power and dust collection for it. It is actually old enough to be labeled Rockewell, and the owner obviously had pride in it as it is pristine.

Thanks, All.

Dan