Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

OT-ish - has anyone here sprayed their house trim

Posts

OT-ish - has anyone here sprayed their house trim

#1

OT-ish - has anyone here sprayed their house trim

Howard In Toronto

>Hi all -

I misguidedly agreed to paint some exterior trim and other stuff at our house.

I'm reluctant to use a brush on large surfaces - like the porch overhang and a couple of doors.

Has anyone ever used a HVLP spray gun and a fair-sized compressor to do so?

The reason I'm asking is because I've got the Porter Cable HVLP gun and a variety of tips for it....

I realize I'll need to mask off areas, etc but if this setup can be made to work on these small-ish areas, I'd be reluctant to rent a sprayer.

As you can see, these surfaces are all small-ish -

- front porch overhang

- eaves

- front door

- garage door

- some trim at the tops of various walls

Any insight/advice would be welcome.

Thank you.

Howard

Re: OT-ish - has anyone here sprayed their house trim

#2

Re: OT-ish - has anyone here sprayed their house t

Matt Robinette,Mt Juliet Tn

>I have but I used an airless sprayer. You can buy a large edge tool at the borg or make one yourself. The one I bought is about 1'wide and 30" long made from plastic with a metal handle. Works like a champ as long as the winds aren't too high.

Matt

Re: OT-ish - has anyone here sprayed their house trim

#3

Jason Roehl in Lafayette, IN

Don't do it.

Jason Roehl in Lafayette, IN

>Unless you have one beast of a compressor and a huge needle for your cup gun, don't bother. You shouldn't thin exterior paint much, if at all. Not to mention, once you spray it on, you need to back-brush it or roll it anyway to work it in to any crack, holes, crevices and the like. You're better off just using a brush and roller if there's not that much to do. Airless sprayers can be rented for $60-80 per day typically. What's your time worth in comparison?

Jason (pro painter)

Re: OT-ish - has anyone here sprayed their house trim

#4

Re: OT-ish - has anyone here sprayed their house t

john lucas

>My former boss made me paint some rooms with a spray gun. I spent more time masking everything off than I would have if I had just gone in there with a roller and brush.

Re: OT-ish - has anyone here sprayed their house trim

#5

Spray vs pump

Mark Goodall - ATL - tooljunkie

>I'm not that familiar with HVLP sprayers, but I do know that there the molecules in latex paint are bigger that oils/stains, etc and so you uaually use on of those airless paint sprayers which actualyl PUMP the paint, not air, to get it in the air.

I've got one of those CH/Wanger 1/2HP units and they are a beast to use, but necessary for exterior latex.

BUt I'm not an expert so what I just said may not be true.

BUt you gotta admit the whole "molecular/atomic weight of latex paint" thing sounded good, didn't it?

Happy Woodworking!

Re: OT-ish - has anyone here sprayed their house trim

#6

Re: OT-ish - has anyone here sprayed their house t

Jim Dillon

>Howard,

One of my major jobs to do this summer was to paint our outside wooden window trim (7 windows) and 14 wooden shutters (following extensive repair). I sprayed, using undiluted latex paint, the shutters with a Wagner HVLP spray gun (#4 tip) and 1-1/2 HP hotdog compressor. That went very smoothly although it actually took longer to set up the shutters and clean the gun than to spray them. But for the trim I just used a 1-1/2 inch angled sash brush and a 2-inch straight brush and that went relatively fast as well - but then I enjoy painting; it's the prep work that is the timeconsumer. However, for what you are doing, I agree with the others that a brush/roller combination would work better and I probably would just go with a brush. I brushed 15 gallons on our house and garage (with lots of overhangs) last summer using a 4-inch brush and it went fine although I was glad to see the job done. The newer paints are so darn good that using a brush is a pleasure. Good luck.

Jim

Re: OT-ish - has anyone here sprayed their house trim

#7

Re: OT-ish - has anyone here sprayed their house t

Barry Irby

>Be careful, I see houses all the time with overspray on the roof. Apparently they don think about protecting the roofing.

Also, be sure to do it on windless days. The stories about painting the neighborhood cars are legendary. Not good to paint the Porshe when you meant to paint the porch.