Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Anybody familiar with Extira?

Posts

Anybody familiar with Extira?

#1

Anybody familiar with Extira?

Ray Thompson - Middletown,IN

>It is an exterior grade MDF type of material. "Moisture resistant exterior panel product for paint grade applications". I just got a small sample (5x5) to look at. It is phenolic bonded and is manufactured to a tolerance of +/- .005. I have no idea as to price or availability, need to do some more searching. My first thought is that it might make a decent substrate material.

Ray

Re: Anybody familiar with Extira?

#2

Oops, forgot sizes

Ray Thompson - Middletown,IN

>It comes in 4' x 8', 4' x 16', and 2' x 16' sheets in thicknesses of 1/2", 5/8", 3/4", 1", and 1 1/4".

Ray

Re: Anybody familiar with Extira?

#3

It looks like...

Lee Schierer - McKean, PA

>It appears to be almost the same as the composite decking materials (Trex, Veranda, etc) only in sheets. It does say it is not for structural use. Moisture resistance indictes that it does absorb some moisture (it contains wood) so some dimensional changes will still occur over time

Re: Anybody familiar with Extira?

#4

Re: Anybody familiar with Extira?

Mark Nowicki

>A 3/4" 4 X 8 sheet costs CDN$62.40. Montreal is a retail desert, so if it available here it must be available anywhere. It was suggested to me as an alternative to MDO plywood.

Mark

Re: Anybody familiar with Extira?

#5

In appearance up close.

Ray Thompson - Middletown,IN

>It is a cross between hardboard (not tempered) and MDF. Much more paper or wood looking than Trex. It is very smooth on one side and has a very slight texture on the other.

Ray

Re: Anybody familiar with Extira?

#6

A bit salty for casual use perhaps.

Ray Thompson - Middletown,IN

>

Re: Anybody familiar with Extira?

#7

Re: Anybody familiar with Extira?

Mike Schwing from Md.

>My brother just had some garage door repair done with the stuff. It looked suspect to me. I just couldn't wrap my head around it for exterior applications.

Re: Anybody familiar with Extira?

#8

I use it...

Brian in Sandusky, OH

>...as a substrate for marquetry.

Basically there is two water-resistant MDFs.

Xtira and Medex. They are basically the same products, but different marketing.

It's essentially identical to MDF in working and structural properties, but it has a water resistant component.

I have no idea as to how it would hold up in an outdoor application, as I only use it with indoor fine furniture.

Paul Schurch taught me to use it for marquetry, and I have done so ever since.

Re: Anybody familiar with Extira?

#9

Re: I use it...

Mark Nowicki

>It comes with a "limited" five year warranty, so it will probably last six months. Basically, it is garbage mixed with glue, I think I will pass.

Mark

Re: Anybody familiar with Extira?

#10

Re: Anybody familiar with Extira?

fred in ct

>a 4'x8' x 1-1/4" cost $115.

Re: Anybody familiar with Extira?

#11

Jason Roehl in Lafayette, IN

Somehow, Ray,....

Jason Roehl in Lafayette, IN

>...I can't see you carrying around a 4'x16'x1.25" sheet of the stuff if it is anything close in weight to a sheet of MDF. That would be a 3-4 man job!!

I bet signmakers use it. And, I'm sure it's like most exterior-grade manufactured wood products--they have enough moisture resistance for you to get them installed and then prepped and painted.

Jason

Re: Anybody familiar with Extira?

#12

At 48lbs/cu.ft.

Ray Thompson - Middletown,IN

>I ain't moving it anyplace. ;-)

Ray

Re: Anybody familiar with Extira?

#13

That is where I see it.

Ray Thompson - Middletown,IN

>I figured the water resistance might give it a bit of oomph over MDF.

Ray

Re: Anybody familiar with Extira?

#14

substrate that is.

Ray Thompson - Middletown,IN

>