Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Walnut & Maple box (prototype #1) PIC cross posted

Posts

Walnut & Maple box (prototype #1) PIC cross posted

#1

Walnut & Maple box (prototype #1) PIC cross posted

Brian In Dawson Creek

>I had to make a few jigs in order to make this box, most of the jigs allowed me to work at 45�.

The idea for this box came from the book called 400 wood boxes and the book has no plans so I made my own � hence the problem. The bottom portion of the box is supposed to have a lip on the top of the inside that the top will fit over. I got my measurements wrong so when I cut out the shape of the box I cut into the lip ruining the box and threw it out. One of the pros on the Canadian forum suggested a fix. I pulled the box out of the scrap bin and sanded the lip right off except for the corners of the box. The legs are template routed on the router table and the top and bottom are both raised panels. The finish is 6 coats of Don Kondra�s Secret Magic Mix. Better known as:

1 oz pure tung oil

1 oz spar varnish

2 oz paint thinner

Two drops of Japan dryer

Wipe on with a cloth let sit for ten minutes and then wring out the same rag and wipe off the excess. Don�t mix up more finish that you can used in a few days as the Japan dryer will caused the mixture to gel even in a sealed container.

Brian

Cut into the lip ... no room for sanding unless It's sanded right off


Supposed to look like this but still have room for sanding the bandsaw marks off


Fixed




Re: Walnut & Maple box (prototype #1) PIC cross posted

#2

Great Box!

Don Pierson

>There are so many things I like about the box...unique...different type of joints...contrasting colors...clean and flowing design...etc...etc! As for the beer I perfer Pilsner Urquell.

Re: Walnut & Maple box (prototype #1) PIC cross posted

#3

LeBat

George@Colonel's Workshop-Havertown PA

>

Re: Walnut & Maple box (prototype #1) PIC cross posted

#4

Re: LeBatt Blue Box

George@Colonel's Workshop-Havertown PA

>Good Afternoon Brian,

I'm surprised you didn't use a blue aniline dye on that beautiful wood so that can would feel right at home when it went to bed that night. Great work. Great beer.

George

Re: Walnut & Maple box (prototype #1) PIC cross posted

#5

Re: Walnut & Maple box (prototype #1) PIC cross po

Joanne Adler in Pt. Pleasant, PA

>Very cool-looking, Brian. But, ahem, where are the handcut dovetails on this project?! :-)

Re: Walnut & Maple box (prototype #1) PIC cross posted

#6

Alan Young

Clever and delightful design!

Alan Young

>

Re: Walnut & Maple box (prototype #1) PIC cross posted

#7

Re: Walnut & Maple box (prototype #1) PIC cross po

Mark Valsi

>Nice Job !!

Re: Walnut & Maple box (prototype #1) PIC cross posted

#8

nice shape

McKay

>