Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Lube for xy vise dovetail ways?

Posts

Lube for xy vise dovetail ways?

#1

Lube for xy vise dovetail ways?

Ken Platt (North Granby, CT)

>Folks -

The ways and gearing of the XY vise on my new mortiser have some sort of thick grease on them from the factory - it looks to be different than the cosmoline-type stuff which is slathered on the cast iron tables. My first thought was to leave it for lubrication, but - major duh moment - as soon as I starting drilling my first mortise the dust and chips started collecting and sticking there. My dust collector should be so good at picking stuff up.

So, I'm figuring that I need to clean off the grease from the factory, but what should replace it? A dry spray lube like Dri-coat (I also have an Elmer's dry-spray lubricant that I use around the house)? Paste wax? Something else?

Thanks -

Ken

Re: Lube for xy vise dovetail ways?

#2

Ellis Walentine

Age-old question

Ellis Walentine

>This comes up all the time, usually in reference to other metal-on-metal friction situations in dusty environments, such as tablesaw blade raising and quadrant gear mechanisms. I always mention my favorite approach, which is to use White Lightning, a bicycle chain lubricant that goes on wet but dries to a lubricating film that will not attract dust. Other visitors have posted solutions that work for them, as I'm sure they will do again. Take your pick, and let us know which works best for you.

Ellis Walentine, Host

Re: Lube for xy vise dovetail ways?

#3

Re: Age-old question

Ken Platt (North Granby, CT)

>Thanks, Ellis. As soon as I read your post I remembered reading here about that stuff before and thinking to myself that I should get some the next time I'm near a bike shop.

I'm off to get some.

Ken

Re: Lube for xy vise dovetail ways?

#4

Re: Age-old question

Rob Stokes in North Vancouver

>Ken - As the vice isn't likely to undergo major repetitions or force, a gloppy application of paste wax will do the trick. White lightning will to - but I always have wax "in stock" so the vice tends to get taken care of.

Rob

Re: Lube for xy vise dovetail ways?

#5

Re: Age-old question

Ken Platt (North Granby, CT)

>Thanks, Rob. I found a bottle (liquid for dripping, not a spray) of something called "Finish Line" which the bike store guy said was a similar product to the White Lightning. I put a couple drops on the horizontal ways, and wiped some on the nonvertical surfaces. Then I used a toothbrush to put wax on all the gears. We'll see how it works.

Ken