Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

80 Year Old Oak Floor Finish?

Posts

80 Year Old Oak Floor Finish?

#1

80 Year Old Oak Floor Finish?

Ron In Sterling CT

>I am in the process of sanding the tongue & groove oak flooring in an 80 year old house. The room is 8 x 14 and will be used as an office/reading room. I have seen several posts in the past on floor finishing, and would like to know what finishes (type/brand) would be suggested. Also what method of application is recommended?

Re: 80 Year Old Oak Floor Finish?

#2

Oil-Based Varathane

Nat Robison

>I've only done my oak floors once but I've liked the Oil-Based Varathane finish (bought at Lowe's). Cost is around $45/gal. Lowe's also rents the Varathane Sander and Pads. There was very little dust and the sanding went pretty quickly with the orbital sander.

Re: 80 Year Old Oak Floor Finish?

#3

Jesper, Denmark

How was it done originally?

Jesper, Denmark

>It sounds like this may be the original flooring in the house, so a finish like it was originally done would be very nice. It seems like a shame to put some plastic looking finish on the original floor - if my assumption is correct.

The floors in my 80 year old house are locally grown pine and may originally have been varnished or - like they are now - treated with a strong soap solution and otherwise not treated except for washing with soap every now and again. This is remarkably durable and easy to keep. The soap can be flakes dissloved in as little water as possible or the old brown liquid soap with some water added. NOT the new synthetic cleaning stuff - real soap.

It is not suitable for heavy traffic, particularly not in a house with many children or where you walk in from the outside without changing shoes.

Re: 80 Year Old Oak Floor Finish?

#4

Re: 80 Year Old Oak Floor Finish?-- Just finished

mike kula

>I have asked so many questions on here and gotten so much help in past projects, it is nice to be able to actually post a helpful response for once! I was beginning to feel like a mooch.

Anyway, a couple weeks back I wrote the list with a similar post, but asked specifically about using Waterlox on my Maple kitchen floors and the oak in my hall and bathroom (an 1896 Victorian), which I ended up doing.

I would HIGHLY suggest going to the Waterlox.com site and reaing their very helpful packet about finishing floors with their product. I used their standard finish which ends up semi gloss (there is a satin if you want mellower) and put 3 coats down in the kitchen, 4 in the bathroom and I have had SO many compliments on the job since finishing.

I actually paid a guy to sand them (very reasonable and by the time I factored in rental of sander, the mess, etc... basically a break even) then did the finishing myself over the next few days. The waterlox on the oak was gorgeous, giving it an instant mellow gold color that doesn't take away from their period character, and likewise on the Maple, an amber age that just looks great. After seeing mine, my neighbor plans to do the same with his floors this fall, and I plan to use Waterlox next summer and redo the whole first floor since now compared to the kitchen and bath they look blahhhh. I know I sound like a commercial for the product, but it really was great to use, very easy smooth application, and the results are even better than I had hoped for.

If I can get to it, I'll post a pic of the finished product if it does the floors justice. So, I'd suggest checking out the site, then if it seems like you want to use it, go to their list of nearby retailers and call to see which ones sell the gallon cans. A local Ace was a retailer, and even sold the gallons almost $20 cheaper than their site directly, and no shipping. Good luck and if you have questions for me about this, I'll keep an eye out for responses and get back to you.

Re: 80 Year Old Oak Floor Finish?

#5

120 yrs old floor . . .

SteveM

>When I was 10 my folks bought a derilect. I'm 47 now. They refinnished the floors and put down oil Verathane ( tough enough to skate on ). I think they've put down an additional coat once through the years, if that. Still looks like glass. After two girls and this monster son, thats saying something ! I think Min-Wax is getting close to the same quality but if I wanted to be sure of long life I'd spend the big $ on Verathane ! Brush it on BUT move swiftly !

Re: 80 Year Old Oak Floor Finish?

#6

Re: How was it done originally?

Ron In Sterling CT

>All of the floors in the house were refinished before we moved in over 20 years ago. I am not sure what was used for a finish, but it looks like some type of varnish. It has held up fairly well in some room, but is pretty well worn in others, as was the case in the sun room which I am now refinishing.