Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Done ducted...

Posts

Done ducted...

#1

JL

Done ducted...

JL

>of course what they don't tell you about the adjustable elbow is that each little seam leaks a little. I found a nice small bucket of water based fibrous "duct sealant". I'm using that on the exteriors of all the elbows. I used in on the interior of the blast gate adapter where they join to the blast gates and on the fittings that I can't wrap with duct tape.

So anyway, here is one of the walls that is finally done. Of course I still need some 4" hose. I plan on putting my lumber storage behind the jointer.


img

Re: Done ducted...

#2

Jim in Burlington Ont.

Metal tape

Jim in Burlington On

>Metal tape is alot easier and you can pull if off and reuse the elbow.

Re: Done ducted...

#3

Re: Done ducted...

Nelson

>Looking good! Is that a Steel City jointer, and if so how do like it.

Re: Done ducted...

#4

Re: Done ducted...

Jim Dillon

>JL,

I agree with Jim that metal tape is the way to go for what you are doing. It is very sticky and conforms to the duct seams very well. Give it a try sometime. Your shop is really taking shape.

Jim

Re: Done ducted...

#5

JL

Re: Steel City 8" Industrial Jointer....

JL

>How do I like it? It's been great so far. I did post a mini-review on it a while back (last part of July).

I've jointed a fair bit of oak and poplar (mostly edge jointing on 4/4 and 8/4). It has worked very nicely. It is very similar to the Delta DJ-20.

Re: Done ducted...

#6

JL

Re: Thanks Jim^2...

JL

>I put the metal tape on the elbow joints. It does draw a little better.