Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

New Jet motor

Posts

New Jet motor

#1

New Jet motor

Patrick Schupbach

>My Jet contractors saw motor died. Does anyone have an idea what a replacement will cost? Im hoping Baldor makes a replacement motor. Any input would be great. Thanks!!

Re: New Jet motor

#2

Several places

Mark Goodall - ATL - tooljunkie

>Contractor's motors are pretty standard NEMA motors (flat base), so unlike a cabinet saws motor, there are many more around and the cost will be more reasonable.

Jet saws come with Chinese/Tiawanese motors. USA made baldors and Leeson motors are considerably more expensive, but you pay for quality.

There are numerous places to get a replacement motor for your saw.

Jet directly - probably expensive

Baldor new - forget it, expensive

Grainger/McMaster-Carr - going to be expensive

New imporat motor - from laces like Grizzly and Northern tool will be much more affordable.

Other internet sources - Check out http://www.electricmotorwarehouse.com/single_phase_TEFC.htm

Used/recond motor - from a local supply house may be affordable.

Salvage yard - I've found some very good motors for less than $50

EBay - I've purchased some Baldor and Leeson motors for about 1/3 the cost. Motors if new shape and work well.

there may be others, that's all I can think of at the moment.

Happy Woodworking!

Re: New Jet motor

#3

Are you sure it's dead?

Kent in Emmaus, PA

>The most common problems involve the start capacitor and centrifugal switch, both of which can be fixed for much less than the cost of a replacement motor.

Re: New Jet motor

#4

Re: New Jet motor

Dave Anderson (PacNW)

>Unless you let the smoke out of it, any electric motor shop can repair the motor. It will be your least expensive option. Electricity Rule 1---never let the smoke out!

Just 2 cents worth,

Dave